Project image
)}
$798
pledged of $25,000pledged of $25,000 goal
8
backers
Funding Unsuccessful
The project's funding goal was not reached on Sat, December 29 2018 5:22 PM UTC +00:00
$798
pledged of $25,000pledged of $25,000 goal
8
backers
Funding Unsuccessful
The project's funding goal was not reached on Sat, December 29 2018 5:22 PM UTC +00:00

About

Hello everyone and welcome to our Kickstarter project. My name is Chris Arcudi co-owner of Arcudi MFG LLC. along with my team members Brandon Morrow and Nizar Bouguerra we are the designers and creatures of our newest product we call Mini Batt Vac.  Are you tired of applying suction cups to your windshield or other smooth surfaces that would let's say hold your cell phone or your GPS only to have them fall off and hit the ground or spill a drink while you are trying to drive? Well fear not anymore because our proven break through design and integrated technology will have you feeling confident about your expensive property staying in place where you put it. Our Mini Batt Vac is a portable rechargeable battery operated mounting system so it's more than just another suction cup. Our Mini Batt Vac works by turning the power button to the on position and with just a little pressure applied  to the Batt Vac it will then initiate the custom designed computer board that will send power to our specially designed vacuum pump to start applying a vacuum to the suction cup until its predetermined vacuum pressure is achieved and then the Batt Vac goes into standby mode again and will continually monitor the vacuum pressure silently in the background until the suction cup starts to lose any vacuum pressure and then the micro computer will tell the pump to start back up for a millisecond just to achieve its proper vacuum pressure again.  Our Mini Batt Vac has the same technology as all of our other line of Batt Vac products except in a smaller more compact design.

Uses for Mini Batt Vac are but not limited to the holding of your : GoPro, GPS, Cell phone, Hair straightener, Blow Dryer, cameras etc. You are only limited to your imagination as to what you would like to bolt to it. And with our line of accessories that will be available for it you will be able to accessorize your Batt Vac with your specific product needs.

 For Backers:

*Outside USA you can do a pledge, no worries we will update you the freight cost before 3 days campaign end. You can message us back thru kickstarter will give you instructions.

 Specifications:

 Featured:

Applications:

  • IP Camera Mount:                                               
  • BMX Helmet Mount:
  • PDR-TOOLS:

 Mini BATTVAC with Claw.

 SPECIALLY FOR PROFESSIONAL PDR.

*********************************************************************************

                                                 Only Limited to your Imagination

*********************************************************************************

Price Plans:

                Best Price  Only For early Birds in Kickstarter 

WORK FLOW:

 Timeline:

TEAM:

Risks and challenges

Generally there are always risks involved with anything that you do in life but we would like to think that we have minimalized it so much that it should never be a concern because our industrial line of Batt Vac's have been on the market for about 2 years now so we are not going into a new product design blind and have managed to resolve most all issues in our prototype stages with our other Batt Vac line.

Learn about accountability on Kickstarter
Questions about this project? Check out the FAQ

Support

  1. Select this reward

    Pledge $149 or more About $149

    Mini BATT VAC- Silver

    Early Bird Only!!!
    Enjoy Mini BATTVAC, Good Choice for the induvidual consumer.

    Best Offer for Kickstarter Backers.

    Includes:
    • 3" Suction Cup - High Quality
    • Mini BATTVAC Device
    • Micro USB cable.
    • 1 Year Warranty (Only Electronic parts)
    • GoPro Style Adapter mount.
    • RAM Style Mount 1" Ball 1/4" - 20 Male Threaded
    • Stand Clip mount.
    • 3.7V@700mAh Li-Ion.
    Less
    Estimated delivery
    Ships to Only United States
    Limited 5 backers
    $

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge $299 or more About $299

    Mini BATT VAC- Gold

    Early Bird Only!!!
    Enjoy Mini Batt Vac, all rewards of Mini BattVac Silver.
    With more accessories and one Extra Mini BattVac device.

    Best Plans Ever!!!!!!!

    Best Offer for Kickstarter Backers.

    Includes:
    • 3" Suction Cup - High Quality
    • Mini BATTVAC Device
    • Micro USB cable.
    • 1 Year Warranty (Only Electronic parts)
    • RAM Style Double Socket Clamp Arm STANDARD
    • RAM Style Mount Universal X-Grip Cradle
    • 3.7V@700mAh Li-Ion.
    • RAM Style Mount 1" Ball 1/4" - 20 Male Thread
    Less
    Estimated delivery
    Ships to Only United States
    Limited 0 backers
    $

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Select this reward

    Pledge $899 or more About $899

    Mini BATT VAC- Platinum

    Early Bird Only!!!
    Enjoy Mini Batt Vac, For professional Photographers.

    Best Offer for Kickstarter Backers.

    You have Priority Support.
    Shipping Free Within USA.

    Includes:
    • 3" Suction Cup - High Quality
    • Mini BATTVAC Device
    • Micro USB cable.
    • 1 Year Warranty (Only Electronic parts)
    • RAM Style Double Socket Clamp Arm STANDARD
    • Plate With Triple-Threaded Hole 1/4".
    • 3.7V@700mAh Li-Ion.
    • RAM Style Mount 1" Ball 1/4" - 20 Male Thread
    Less
    Estimated delivery
    Ships to Only United States
    0 backers
    $

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.

Funding period

- (30 days)