Project image
)}
CHF 5,197
pledged of CHF 105,000pledged of CHF 105,000 goal
27
backers
Funding Unsuccessful
The project's funding goal was not reached on Wed, March 13 2019 7:59 AM UTC +00:00
Joël AntoninBy Joël Antonin
First created
Joël AntoninBy Joël Antonin
First created
CHF 5,197
pledged of CHF 105,000pledged of CHF 105,000 goal
27
backers
Funding Unsuccessful
The project's funding goal was not reached on Wed, March 13 2019 7:59 AM UTC +00:00

About

This is BAM! This is a small interface that allows you to connect the best of microphones to your smartphone wirelessly.

BAM! is presented as a slice of a mixing console:

  • Adjustment of the gain in increments
  • VU-meter for visual level control and fader in the form of a knob.
  • Phantom power (+48V)

3.5mm jack connector to connect a headset to monitor what is being transmitted.

Range: 30m!

BAM! uses Bluetooth 3.0 technology to send the audio signal from your professional equipment. It connects directly to a microphone or to the output of a mixing console. Pair it with a smartphone and shoot with your favorite app!

BAM! runs on iOS or Android with the following applications and many more :


MoviePro, FiLMiC Pro, Mavis, Camera FV-5, LU-Smart (LiveU), MoJoPro (Aviwest), CT Pro, etc... The application must be able to use Bluetooth as an external audio source.

This small transmitter can also be used for live broadcasting. The delay between audio and video is imperceptible. It’s less than a frame!

Specifications

  • Input : XLR 3-pin female
  • Impedance : 1kOhm
  • Bluetooth : STD 3.0
  • Frequency range : 50Hz - 7kHz
  • Sampling frequency : 16kHz
  • Range : 30m
  • Autonomy : 4h (minimum)
  • Dimensions : 14.5cm x 3cm x 4.5cm

Project status

The development is basically finished. The design should not or only slightly evolve. The production of functional prototypes made it possible to validate the quality of the key components of this project. In addition, the production will be carried out in Switzerland at the service provider who made the prototypes.

Here is a small presentation of the different generations of prototypes already made.

 project video thumbnail
Replay with sound
Play with
sound

Thank you for your attention :-)

Risks and challenges

We really appreciate that you guys support us and bring BAM! to reality.

We fully expect BAM! to be delivered on time, with all features ready to go. I work with electronics and plastic injection professionals to achieve this. They are all very reliable.

I will always update the latest steps I've reached, so stay tuned!

Learn about accountability on Kickstarter

Questions about this project? Check out the FAQ

Support

  1. Select this reward

    Pledge CHF 3 or more About US$ 3

    Offer a coffee (or more)

    The nights are short, a good coffee gives a good turbo boost to the brain!

    Every little helps! Thanks for your support!

    Less
    Estimated delivery
    0 backers
    CHF
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge CHF 189 or more About US$ 187

    Early Bird 1x BAM!

    You're awesome ! Thanks for backing us so quickly !
    Receive a transmitter.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited 22 backers
    CHF
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Select this reward

    Pledge CHF 249 or more About US$ 247

    1x BAM!

    You're awesome ! Thanks for backing us !
    Receive a transmitter.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    1 backer
    CHF
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  4. Select this reward

    Pledge CHF 2,099 or more About US$ 2,080

    The "newsroom" pack ! 10x BAM!

    Thanks for backing us !
    Receive 10x transmitters for you and your fellow journalists.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    0 backers
    CHF
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.

Funding period

- (30 days)