This project will only be funded if it reaches its goal by Sun, October 7 2018 5:41 PM UTC +00:00.
Hi all, I'm here with a new project, a printable version of modular hexagonal terrain for 28 mm miniatures (or others scale).
Exagons can be combined with each other in any position (except the swamp that is to itself) to form a 160 x 120 cm (63 x 47 inches) scenario.
Each hexagon measures 158 x 137 mm (6.2 x 1.45 inches) scaled for 28 mm miniatures but you can scale it any way you like.
The height of each hexagon varies from about 2 and 6 cm (0.78 - 2.3 inches) . Unnecessary supports (except the huts)
Exagon printed in PLA
With a small staple to print you can join the hexagons to have a more stable ground, also being the hook under the hexagons, it is easy to replace a hexagon without moving the ones next to it
The package includes 100 files:
-16 river hexagons
-27 rocks hexagons
-10 cobblestone road hexagons
-11 gravel road hexagons
-6 stone huts hexagons
-3 ruins hexagons
-3 hill hexagons
-5 skeletons hexagons
-9 walls hexagons
-9 swamp hexagons
-1 empty hexagon
By supporting this project you'll get the STL files necessary to print your own all models you see on this page,
------ YOU WILL RECEIVE THE FILES ONLY FOR 3D PRINTING IN STL, NOT THE PHYSICAL MODELS ------
Each model was digitally sculptured by me, and received the following checks:
-Check with Autodesk Netfabb Premium 2018
-Check with Autodesk Meshmixer
-Check with Autodesk 3ds Max 2016 Stl Checker
-Check of slices with Cura
Every mesh is CLOSED,ORIENTED,WITHOUT BORDER EDGES,INV. ORIENTATION, HOLES.
At the end of the campaign I will send the files to backers via Google Drive.
Note: All models are for personal use only and may NOT be used for commercial purpose.
Below the photos of the complete scenario made with the technique of milling on polystyrene to quickly test the STL files and give you a glance of the whole.
note: the dead trees, the tower and the ruin beside it, are not part of the campaign, they are from the previous "fantasy pack" campaign available as a bundle in the last pledge.
Tower from my previous campaign
Dead trees and ruin from my previous campaign
Below you can see the rendering of the stl files:
For all backers this large model to be placed either on hexagons or stand alone.
I will give the whole model and that divided into parts 15x15 cm
The altar is interchangeable, you choose which one to put
For all the backers this modular lake, with these 13 pieces you can decide the shape an the dimension of the lake.
the video music is from: Dreamy Flashback di Kevin MacLeod Creative Commons Attribution (https://creativecommons.org/licenses/by/4.0/)
Risks and challenges
Since you will be receiving digital STL files printing yourself, the risk is kept at the minimum since there is NO PHYSICAL MODELS delivery involved.
Quality of the printed models will depend on your printer settings.
if you need assistance I will be happy to give it to you