Andere über dieses Projekt informieren

Fertig

Andere über dieses Projekt informieren

Fertig
The CreatorBot is the first affordable Two Color commercial grade large scale printer that everyone can use. Create bigger prints!
79 Unterstützer trugen 75.517 $ bei, um dieses Projekt zu verwirklichen.

Über uns

CreatorBot-3D  2 color printer. With 12" & 18" Print heights Project-Video-Thumbnail
Wiedergabe Ton AN
Mit Ton
wiedergeben

75.517 $

79

 STRETCH GOAL $45,000.00     WIFI Connectivity upgrade on all printers!

Two color printing is easy with Dual extruders!

 Project-Video-Thumbnail
Wiedergabe Ton AN
Mit Ton
wiedergeben

Adding a third color using the Change filament command adds more depth to your prints.

 Project-Video-Thumbnail
Wiedergabe Ton AN
Mit Ton
wiedergeben
Here are some of the materials that the CreatorBot can print with.
Here are some of the materials that the CreatorBot can print with.

 Flexible materials like  "Ninjaflex" can be printed on the CreatorBot 3D Printer.

What is 3D printing all about?

3D printing, also called additive manufacturing, is the process of converting computer models into real objects. The process starts with a 3D computer model that you can draw on free programs like Google Sketchup or you can download thousand of things that people have already created from sites like thingiverse. The printer software takes the 3D computer model and slices it into layers. The printer heats up plastic filament and extrudes it in fine layers on the build plate one layer at a time until the object is completed.

What is the CreatorBot 3D Printer ?

The CreatorBot is the first (affordable) commercial grade large scale printer that everyone can use. With one of the largest print volumes available your creations become life size. We set out to build the most useful , durable and dependable printers available without “Breaking the Bank”. A fully assembled printer to get you going right out of the box. We gave it a large print area so you can build larger models. More freedom of design for your projects. More useful items for the home and office, larger sized models for the architect and engineer. A dependable tool for starting a home based business.

Special thanks to our media friends for featuring the CreatorBot.

 Project-Video-Thumbnail
Wiedergabe Ton AN
Mit Ton
wiedergeben

Who we are and what we are doing?

We are a family of  "makers" with a unique mix of skillsets. (Be sure to check out our bios). I’m Tom, the manufacturing veteran and my partner is my son Ben, a former Marine, who is majoring in computer science.  By combining our talents and passion as Makers we set out to engineer, develop and manufacture an affordable, commercial grade 3D printer. We see the first hand benefits to having a reliable large volume printer. Our printers are affordable, durable and well-engineered. We love 3D printing. We see this technology as the next industrial revolution. For the entrepreneur the ability to design, create and resale at home is here today. The artist has a larger pallet to produce his creations on. The hobbyist can bring larger ideas to life. The possibilities are endless! The idea of having a factory in your garage is here. Our Mission: Build Quality products, on time, at fair prices. Bring affordable easy to use 3D printers to the consumer that have a build volume that can produce real life size creations. A printer built to last.

Here is our flagship model with a 12" x 12" x 12" tall build height!

Upgrade to an 18" tall build height with enclosure for $99.00 added to your pledge.

Enclosed 18" Build chamber.
Enclosed 18" Build chamber.

 Our enclosed build chamber controls the cooling process on extra large prints!

Why we need you to support our project:

We have put in the engineering time. Tested the beta units and ironed out the bugs. We are now ready to start the manufacturing process. We have invested our own funds to build and test working prototypes. We are now ready to tool up many of the components to build the printers. We have a world class supplier network. To keep the cost affordable and allow us to make a small profit we must invest in tooling to keep cost in line. We have manufacturing space, work cells and processes in place. Now we need our first production run to achieve the buying volume and put the wheels in motion. 

 Why our project matters: We have seen low cost printers popping up in the market with big claims. The race to the bottom to produce the cheapest printer usually hurts the consumer with poor performing products, unreliable performance and negative feedback in the community. 3D printing is a precise process, good quality printing requires a stable platform. Printing objects layer by layer takes time. The printer needs to run long cycles and not overheat. We believe the 3D printing experience should bring satisfaction when you see your creativity come to life. We want to be the team that offers reliable, long lasting and easy to use printers to the consumer.

 Project-Video-Thumbnail
Wiedergabe Ton AN
Mit Ton
wiedergeben

Mechanics What makes our printer stand out?

-Well, we started with a rigid aluminum frame to maintain precision alignment. Then we added precision ground stainless steel linear rails coupled with linear ball bearings for smooth motion. All of the connection components are printed from parent printers.

-The electronics and heat bed are fed by a 450watt power supply back by a full two year warranty. Because printing large creations require long print times, we added direct cooling and high capacity heat sinks to the controller board.

  -The aluminum bed carriage is laser cut and cnc fabricated for exactness of fit. Then we developed a lightweight remote drive printhead (Bowden type) to minimize weight at the printer nozzle. And we didn’t stop there.

 -The build plate has some neat features; first, it doesn’t need tape to hold the print in place like other machines. We added a process to the tempered glass that requires only a light coat from a PVA glue stick (Elmer’s). We also added a magnetic latch to hold the plate in place. Bed leveling is simplified with a three point mount. We have future improvements in the works as well.

And its durable!

How do we compare?

Where we are now:

The current version is running from an SD card controlled from an LCD screen. We have three beta machines with dual extruders running at our test stands. Production planning is under way along with DFM (design for manufacturing) procedures. Allot of the production planning is focused on process engineering and quality controls to be implemented throughout the work cells.   The oldest beta unit has been operating over 9 months. The fit and finish is completed. Packaging specs underway. We have work cells complete for one assembly line outfitted with instruction cards and assembly fixtures. Tooling designs are completed and the supply chain is secured.

CreatorBot T shirt and Decal
CreatorBot T shirt and Decal

Where were going/we are working on:

Ben is working on a filament detection system that will pause the print and alert you when you run out of material. This allow you to run the spool empty during a print without having to start over. We measure “total cost of ownership” by the efficient use of consumables. Just like ink cartridges in the 2D printers we want the largest available spools at the lowest cost and be able to use every inch of it. Another area of development that we are focusing on is the bed leveling and calibration system. We will be allocating many man hours to developing an automatic leveling sequence to run before each print. This is still in the early stages but steady progress is being made on thru prototyping and there’s still a lot of code to write. And because our electronics are pulled from the open source movement we will be sharing our advancements with the community.

 Project timeline:

 

Risiken und Herausforderungen

As with all start ups there challenges to overcome and decisions to make. The majority of the parts used in the manufacture of our printers are commercially off the shelf components (COTS). This means we have a broader supply base available thus minimizing supplier issues. It also benefits the user if there is ever a service issue. The US military mandates the COTS program and we think it’s a good idea too! We are however printing some of the parts and tooling the remaining. We will have to build a printer farm to handle the parts production in house. We have designed all of the key connection components to be 3D printed allowing the end user to print upgrades as the product evolves. We will always share the files available for download from our website.

Näheres zur Rechenschaftspflicht auf Kickstarter

Noch Fragen zu diesem Projekt? Viele Antworten findest du in den FAQ

Support

  1. Diese Belohnung wählen

    Mindestbeitrag: 10 $ Ungefähr 10 $

    We appreciate your support with our CreatorBot 3D decal. Put it on your laptop, window ,car bumper, it will look good everywhere!

    Weniger anzeigen
    Voraussichtliche Lieferung:
    2 Unterstützer
    $
    Kickstarter ist kein Geschäft.

    Es ist eine Plattform, um kreative Projekte ins Leben zu rufen.

    Weitere Informationen zur Rechenschaftspflicht.
  2. Diese Belohnung wählen

    Mindestbeitrag: 25 $ Ungefähr 25 $

    Support us wearing this cool T shirt with our CreatorBot 3D logo.

    Weniger anzeigen
    Voraussichtliche Lieferung:
    0 Unterstützer
    $
    Kickstarter ist kein Geschäft.

    Es ist eine Plattform, um kreative Projekte ins Leben zu rufen.

    Weitere Informationen zur Rechenschaftspflicht.
  3. Diese Belohnung wählen

    Mindestbeitrag: 795 $ Ungefähr 795 $

    From our first official production run we will have a limited supply of DIY kits available for the "Makers" that want to build there own Single head PLA printer. The kits will have step by step instructions and all of the components needed to build your own CreatorBot. Just add labor.

    Weniger anzeigen
    Voraussichtliche Lieferung:
    Begrenzt 0 Unterstützer
    $
    Kickstarter ist kein Geschäft.

    Es ist eine Plattform, um kreative Projekte ins Leben zu rufen.

    Weitere Informationen zur Rechenschaftspflicht.
  4. Diese Belohnung wählen

    Mindestbeitrag: 875 $ Ungefähr 875 $

    From our first official production run we will have a limited supply of DIY kits available for the "Makers" that want to build there own Dual head ABS printer (heated bed included). The kits will have step by step instructions and all of the components needed to build your own CreatorBot. Just add labor.

    Weniger anzeigen
    Voraussichtliche Lieferung:
    32 Unterstützer
    $
    Kickstarter ist kein Geschäft.

    Es ist eine Plattform, um kreative Projekte ins Leben zu rufen.

    Weitere Informationen zur Rechenschaftspflicht.
  5. Diese Belohnung wählen

    Mindestbeitrag: 975 $ Ungefähr 975 $

    Receive our CreatorBot single head PLA printer form our first official production run. This printer will be fully assembled and calibrated. It will come with a spool of PLA to get you started as soon as you receive it.

    Weniger anzeigen
    Voraussichtliche Lieferung:
    0 Unterstützer
    $
    Kickstarter ist kein Geschäft.

    Es ist eine Plattform, um kreative Projekte ins Leben zu rufen.

    Weitere Informationen zur Rechenschaftspflicht.
  6. Diese Belohnung wählen

    Mindestbeitrag: 1.095 $ Ungefähr 1.095 $

    Receive our CreatorBot Single head printer for ABS from the second production run. This printer is fully assembled and calibrated. We will supply you with a spool of ABS filament to get you started when you open the box.This printer will be up-fitted with a heated build plate and upgraded power supply.

    Weniger anzeigen
    Voraussichtliche Lieferung:
    Begrenzt 0 Unterstützer
    $
    Kickstarter ist kein Geschäft.

    Es ist eine Plattform, um kreative Projekte ins Leben zu rufen.

    Weitere Informationen zur Rechenschaftspflicht.
  7. Diese Belohnung wählen

    Mindestbeitrag: 1.195 $ Ungefähr 1.195 $

    Receive our CreatorBot dual head for PLA. This printer is fully assembled and calibrated. We will supply you with two spools of PLA fillament so you can start printing when you open the box.

    Weniger anzeigen
    Voraussichtliche Lieferung:
    Begrenzt 3 Unterstützer
    $
    Kickstarter ist kein Geschäft.

    Es ist eine Plattform, um kreative Projekte ins Leben zu rufen.

    Weitere Informationen zur Rechenschaftspflicht.
  8. Diese Belohnung wählen

    Mindestbeitrag: 1.295 $ Ungefähr 1.295 $

    Receive our CreatorBot Dual head printer for ABS. This printer is fully assembled and calibrated. We will supply you with two spools of ABS filament to get you started printing when you open the box.This printer will be up-fitted with a heated build plate and an upgraded power supply.

    Weniger anzeigen
    Voraussichtliche Lieferung:
    8 Unterstützer
    $
    Kickstarter ist kein Geschäft.

    Es ist eine Plattform, um kreative Projekte ins Leben zu rufen.

    Weitere Informationen zur Rechenschaftspflicht.
  9. Diese Belohnung wählen

    Mindestbeitrag: 1.394 $ Ungefähr 1.394 $

    Receive our 18" print height CreatorBot Dual material printer with heated bed. This printer is fully assembled and calibrated. We will supply you with two spools of filament to get you started printing when you open the box.This printer will feature an enclosed build chamber to maintain temperatures on large prints.

    Weniger anzeigen
    Voraussichtliche Lieferung:
    20 Unterstützer
    $
    Kickstarter ist kein Geschäft.

    Es ist eine Plattform, um kreative Projekte ins Leben zu rufen.

    Weitere Informationen zur Rechenschaftspflicht.

Finanzierungszeitraum

- (34 Tage)