PLUB: Don't plug in, PLUB in! by boud

PLUB: Don't plug in, PLUB in!

Make wired headphones wireless! PLUB is the most affordable, compact and simplest-to-use Bluetooth receiver.

Créé par

boud

986 contributeurs ont engagé 46 016 $ pour soutenir ce projet.

Récompenses Campagne FAQ Actus 6 Commentaires 98 Communauté

Partager ce projet

Cet espace vous sert à encourager le contributeur et à échanger avec les autres contributeurs.

Une question ?

Reportez-vous à la FAQ

Seuls les contributeurs peuvent publier des commentaires. Connexion

1. Hansol Kim il y a 1 jours
  
  Does it support AAC? iPhone doesn't support aptX as I know.
2. Woo Chee Yeong il y a 1 jours
  
  Hi, just to query whether the survey had being send out for backers? The funds were deducted from my account but I have yet to received any survey email. Thanks
3. boud Créateur il y a 4 jours
  
  @JimJohnson Oh if you are on the Backer list then there should be no problem! That is strange that you're not getting the e-mail. Definitely at the very least you should be receiving our update e-mails. Have you double checked your account info to check if the e-mail was inputted correctly??
4. boud Créateur il y a 4 jours
  
  @Donald Yes that is correct! We're very sorry for the initial mistake for posting the delivery date as July!
5. boud Créateur il y a 4 jours
  
  @Donald Yes that is correct! We're very sorry for the initial mistake for posting the delivery date as July!
6. Jim Johnson il y a 5 jours
  
  Your KS page info shows I am Backer #1037 and my payment of $35 has been collected for my $25 Pledge plus $10 shipping.
  
  However, I have not received the automatic end-of-campaign email Kickstarter sends to my email address they have on record. I have not received any emails from you. I have not received the automatic email from Kickstarter telling me my credit card has been charged. I previously received the email telling me I had become a Backer of your KS. Will you look into this problem with your campaign as I have never had this problem in almost 80 that I have successfully Backed in the last 5 years.
7. Donald il y a 5 jours
  
  Hi @boud, so for those who backed the options for July deliveries will still get theirs in sept right?
8. boud Créateur il y a 5 jours
  
  @JimJohnson Hello Jim! Have you received e-mails of our updates? If so it is very likely that you are a backer of PLUB. Your card shouldn't have been charged yet as Kickstarter takes about 2 weeks after the conclusion of the campaign to charge the card. Maybe check your Kickstarter account ~ it should show you which projects you have backed. Thanks for your question!
9. boud Créateur il y a 5 jours
  
  @chayton No problem! :) haha we never made the connection with Fight Club soap but see the resemblance now!
10. boud Créateur il y a 5 jours
  
  @John Hello John! So the first rewards, which were closed within the first day were unfortunately a typo. All deliveries are currently scheduled for September and we are right on track! Thank you!
11. Jim Johnson il y a 5 jours
  
  I have not received notice from you or Kickstarter about the campaign ending and my card being charged. Is there a problem with my pledge?
12. chayton il y a 6 jours
  
  never mind I found the colors I like the sunrise red because for some odd reason it reminds me of the fightclub soap and Ironically I am a Huge consumeristic person
13. chayton il y a 6 jours
  
  what are the color choices that will be on the survey
14. John il y a 6 jours
  
  In the orders options, it says one for July and the other for September. Will you be following this, or all orders will be shipped in September?
15. boud Créateur il y a 6 jours
  
  @Sun Yes! The survey for color choices will be done closer to the delivery date for PLUB. We will be sure to update you when the surveys go out!
16. boud Créateur il y a 6 jours
  
  @Sun Yes! The survey for color choices will be done closer to the delivery date for PLUB. We will be sure to update you when the surveys go out!
17. Ernesto Barraza il y a 7 jours
  
  Hi guys.
  I sent you a Provate message, to update my payment.
  Regars!
18. Nol van Meegeren
  Superbacker
  il y a 7 jours
  
  Hey, I forgot to change my pledge for the additional neckband, is it possible to get them later as well?
19. Sun le May 14
  
  Hi. Will the surveys for the color choices be emailed to us after the production achievement?
20. boud Créateur le May 14
  
  Hello Moises,
  
  Thank you for your question. This device would support the original aptX codec.
  
  Best regards,
  boud
21. Turki le May 13
  
  Hello,
  I've pledged a one plub, will i be getting a neck band?
22. Moises Cardona le May 12
  
  Hi, I don't know if this has been answered here below, but what aptX codecs does this device supports? The original aptX codec, aptX Low Latency, aptX HD?
23. boud Créateur le May 11
  
  @EddieWu I believe you are speaking about the ear pods with 3.5mm plug?? Yes it is compatible!
24. Eddie Wu le May 11
  
  Is it match with earpod? microphone and control
25. boud Créateur le May 10
  
  @ErnestoBarraza First, can you please private message us with where you would want your rewards shipped to?? Shipping costs need to be factored in! Thanks so much!
26. boud Créateur le May 10
  
  @ErnestoBarraza Yes you can! Will reply to your message!
27. Ernesto Barraza le May 10
  
  aa okok.
  thanks.
  
  But, guys... I have one more question:
  I want to support for the pledge of 2 Plubs.. Can I buy only 1 Neck Band?
28. boud Créateur le May 10
  
  @Ernesto Barraza Thanks for your question!
  Are you talking about sharing function? Unfortunately, you can't use the features you're talking about. But we are researching to use the sharing function easily.
29. Ernesto Barraza le May 8
  
  Hey Guys, I have a question..
  
  If I had 2 plubs, can I match the two of them with one single device? To listen to the the same song with my girl, using one Plub each one...
30. Jon Dhuse le May 8
  
  Yes - that is my suggestion. I would like to have a bluetooth transmitter that would pair with PLUB and would therefore let me connect my mini-disc player wirelessly to my headphones.
31. boud Créateur le May 8
  
  @JonDhuse Hello Jon thanks for your suggestion! Just to be clear, are you suggesting a bluetooth transmitter that can pair with PLUB? PLUB should have to restrictions in pairing with older audio equipment so long as it connects through a 3.5mm AUX cable cord. Thanks again!
32. boud Créateur le May 8
  
  @JonDhuse Hello Jon thanks for your suggestion! Just to be clear, are you suggesting a bluetooth transmitter that can pair with PLUB? PLUB should have to restrictions in pairing with older audio equipment so long as it connects through a 3.5mm AUX cable cord. Thanks again!
33. boud Créateur le May 8
  
  @JonDhuse Hello Jon thanks for your suggestion! Just to be clear, are you suggesting a bluetooth transmitter that can pair with PLUB? PLUB should have to restrictions in pairing with older audio equipment so long as it connects through a 3.5mm AUX cable cord. Thanks again!
34. Jon Dhuse le May 7
  
  It would be great to create a matching Bluetooth transmitter with a simple audio input. This would enable a lot of slightly older audio equipment to be used with your current product... sort of a matching set. Any thoughts about developing such a product?
  
  Thanks, Jon.
35. boud Créateur le May 4
  
  @Nathan Thanks for your question! The retail price has not been 100% fixed yet, but our current estimates are as follows:
  
  PLUB: approx. $35
  PLUB + Neckband : approx. $50
  
  We definitely want to provide value to our earliest supporters on Kickstarter and hopefully showed it in our reward structure!
36. boud Créateur le May 4
  
  @Nathan Thanks for your question! The retail price has not been 100% fixed yet, but our current estimates are as follows:
  
  PLUB: approx. $35
  PLUB + Neckband : approx. $50
  
  We definitely want to provide value to our earliest supporters on Kickstarter and hopefully showed it in our reward structure!
37. boud Créateur le May 4
  
  @Nathan Thanks for your question! The retail price has not been 100% fixed yet, but our current estimates are as follows:
  
  PLUB: approx. $35
  PLUB + Neckband : approx. $50
  
  We definitely want to provide value to our earliest supporters on Kickstarter and hopefully showed it in our reward structure!
38. Nathan Horsley le May 4
  
  What will be the retail price of PLUB when it releases to the public
39. boud Créateur le May 4
  
  @JeffreyBGeorge No problem! :) We know it was further down on the page. We appreciate your support!
40. Jeffrey B George
  Superbacker
  le May 2
  
  @boud, AWESOME. I must have been blind, yes there is a clip, a lovely one at that. :-) So cool about the splitter idea too.
41. boud Créateur le May 2
  
  @JeffreyBGeorge Thanks to a fellow backer, we found out simultaneous charging and music playback is possible. It's a bit complicated, but it would require a "Splitter" which has both female & male gender ports/jacks.Then the male jack could be plugged into your speaker and the female port could be plugged into with the USB cable, which would allow for charging. If you type in AUX splitter into google, you can get a sense of what we're referring to.
  
  As for the clip, actually a clip comes included with PLUB! :) Check out the components part of our campaign page to see what it looks like. Thanks so much for your support!
42. boud Créateur le May 2
  
  @Schärer Remo Thank you so much for your kind words! Definitely, we sought to address a singular problem (making wired headphones useful again) in the simplest way possible. We greatly appreciate you & thank you for reaching out to us!
43. Jeffrey B George
  Superbacker
  le May 2
  
  Would love to be able to leave one plugged into my stereo without having to recharge daily. Major price savings over Apple's Airplay.
  
  A minor suggestion for a future product, I'd love to see a simple clip to fasten the plub to my t-shirt, pocket, etc.
  
  The neck piece looks very nicely designed!
44. Schärer Remo le May 1
  
  Hi boud
  I was skeptical at first and asked myself why I should support you ...
  
  For all who now have headphones with cables will boost your product, the comfort of massively. There will be a headset from each headphone.
  
  ... I never need to worry about buying, with or without cables. And when my headset is empty, I take your product and normal headphones.
  
  Best Reagrds from Switzerland
45. boud Créateur le April 29
  
  Hello Patrick Petersen ,
  I think your suggestion is a good idea.
  But our intention is small size and low price.
  So we focused on the core function.(only necessary to listen to music)
  It supports splash proof.
46. Patrick Petersen le April 29
  
  Which IP-certification will it have? IP68 or IP67?
47. Patrick Petersen le April 29
  
  Oh, and two questions:
  Why not give it Qi support / wireless charging?
  Why not build a little cradle for charging?
48. Patrick Petersen le April 29
  
  He's just wishing your the best with this campaign and is hoping for a global drop on the established products price. ;)
49. boud Créateur le April 29
  
  Hello Scharer,
  
  We cannot understand what you said in your language. Please post your comment in English.
  
  Best regards,
  boud.
50. Alvin Lim le April 29
  
  Hi team,
  
  Is has been long overdue for an update to the product. Is there any update to the product actually?