Due to popular request and based on your suggestions, we are proudly presenting laser cube 2.0 and easy G-code generated software !
Please note: Contacting us via email is the quickest way to reach us. If you have any questions, comments or concerns, we would be happy to answer them via our customer service email :
Improvements made the laser cube 2.0 is more advantageous.
Video of engraving/cutting
Easy Gcode Software
What is laser cube 2.0？
It is our improved level laser cube. Comparing the original cube, laser cube 2.0 provides you a upgradeable working area. Its updated new main board supports high efficiency working, like cutting papers, engraving wood, bamboo, leather, plastic...
Engraving on Cell Phone Case
Engraving on Olive Wood
What is Easy G-code Software?
Supper Easy G-code software is for all kinds laser machines which are G-code file required ! For example, it supports laser cube, laserblade, Mr beam, Microslice and Hubble ,because all of them are using the same GRBL firmware.
Software supports the laser machines like below...
How easy of easy Gcode software is ?
Only three clicks to finish your Gcode files. It is so easy!
Open the software, add photo or image...
Send your NC file to GRBL & Engraving...
Why is Easy G-code Software?
Before laser engraving...
After laser engraving...
Characteristic of Easy Gcode software
- Interface simple and clear
- Main menus concise and easy to master
- Images and pictures supported
- Test input and edit supported
- Apply for most of laser machines
How does laser cube 2.0 works?
Laser Cube 2.0 is also as a kit ,it comes with all the parts you need to assemble and operate your own laser cube.
Engraving on a Business Card & Pen
Laser Cutting on Foams
Features of laser cube 2.0
- New main board reinforces stable and high efficiency working
- Upgradeable working area
- Adjustable design for thicker material
- No limitation of engraving height
- Easy cool down system
- Easy to be carried
Main Details of Laser Cube 2.0
- Footprint : 8.8” x 6.6“ (upgradeable)
- Working area : 4.5” x 4.5” (upgradeable)
- Framework material : Aluminum , Acrylic (optional)
- Power supply : Input 100-240VAC, Output: DC 12V-2A
- Laser Diode: 100mw ( Focusable Adjustable Laser Dot )
- Processor : Arduino Software : GRBL Controller
- Gcode complier: laser cube Easy Gcode Software ( optional)
- Operating System : Window, Mac, linux
Cutting Micky & Minnie Mouse Puzzles
How to upgrade a bigger size frame of laser cube?
The function of laser cube 2.0 supports higher operating working area. If you want a bigger laser working area than laser cube 2.0, you can build your own frame. The size is unlimited.
Alter Size & Length of Alumimum Rails & Timing Belts are all you need to upgraded a bigger working area...
Keep the main parts to assemble for your bigger working area...
What elements are included in the Laser Cube 2.0 kit ?
- Aluminum and Acrylic frame
- Arduino Control board
- Laser Cube shield
- Laser diode (100MW )
- Heatsink and cooling fan Plastic parts (motor & laser mounts, …)
- Power supply
- All required cables, bolts and screws
- Safety glasses
Laser Cube Controled by the Grbl Motion Control Software, it uses standard G-Code to interpret designs.
For G-code file, you have options to chose a software for it.
In Easy G-code software, you can use your favorite images or pictures, through Easy Gcode software to generated your Gcode file , and send to the laser for cutting or engraving.
Laser can injure or blind you if not use properly. Please alway wear appropriate eye protection when operating the Laser .The laser cutting process also produces fumes that may be toxic from certain materials. Make sure the air good enough around your working area . Keep it away from children and other people who are not familiar with using such a cube.
Stretch Goal ---$25,000
We are going to enhance and improve parts of components. They will optimize our cube and make it works and looks better. They are:
1. The new designed of laser.
The new one is built inside of the heat sink. The fan is placed on the top for ventilate the air and provide more protection to longer its lifetime. The integral design is neat the space.
2. The framework is all used aluminum instead of black Acrylics. A steel “L” connector secured the framework. Those entire replacements make the cube is stable and stronger.
3. The little blue piece is made of 3D printer. It is used to stable the timing belt. Add a little light bule color; the cube looks more gorgeous.
4.The thickness of acrylic is increased from 5mm to 8mm. it provides more tolerance and endurance for the main parts.
Jun to Jul -------Kickstarter Campaing
Jul to Aug -------Survey & Finalize
Sep to OCT -------Production
Oct to Nov -------Quality Control & Packaging
Nov to Dec --------Shipments
Why do we need your support?
We need your support to launch this laser cube and Gcode software. We are raising fund for manufacturing, packaging, and logistics. Your support for the production of these laser cubes will bring meaningful and pleasurable all around you. Thank you for taking time to help us make this project achievable.
Risks and challenges
After launching the first laser cube project, we were able to learn a lot more about the many aspects of crowd funding. We've been working to improve every step along the way from production costs to shipment methods .
Our relationship with our suppliers and manufactures are getting stronger after the first project. we were so happy and appreciated that they gave us prompt support as we needed so that we could almost met each of our shipment deadline.
Here ,we have confidence to ensure stock and lead-times are within our production requirements; and ensure all the components have been testing and met the highest standard.Learn about accountability on Kickstarter
- (32 days)