STICKO, A MULTI- PURPOSE GADGET THAT USES THE POWER OF SUCTION CUPS TO HELP YOU STAY CONNECTED WHEREVER YOU GO. Read more
This project was successfully funded on December 9, 2013.
About this project
Why Sticko? Where did the idea come from? Well, My wife, Gal and I, like most people today, are dependent on our smart phones but both are very aware of the dangers of driving while being on our phones. Gal surprised me one day and got me a phone mount for our car so that my phone would stay in place and be visible to me while I drive. However, as an industrial designer it is important to me that the gadgets I own are not only easy to use and versatile, but look good too. The phone mount she got me was bulky and difficult to set up, plus, once I got out of my car and went to where I had to go I was left with no mount for my phone.
After doing some research on phone mounts that exist in today's market, I found that they were not easy to use, and lacked in design. Also, none of them gave you the option of easily taking them out of your car and traveling with you from place to place so that you will always have somewhere to mount your phone.
So we try to think of a solution for a phone mount that is simple and can travel with you everywhere you go.
We have spent the past 7 month developing, designing, and testing many different prototypes of Sticko. Testing out different materials, different sizes and different designs until we found the perfect combination so that Sticko will be simple, strong and look cool in all its uses, especially when connected to your smart phone.
Finally, Sticko was born! A gadget that is small in size but big in its benefits:
Sticko can attach to any smooth surface and is flexible due to the suction cup material its made out of. Its flexibility allows for Sticko to attach to smooth surfaces that are not necessarily flat. Sticko is made out of a special u.v protected and heatproof material so it will stay strong even in the harshest conditions like a hot car in the middle of summer. It weighs less than 5 grams and is less than 14 millimeters high.
It comes with a lobster clamp and earphone jack attached to it. You can attach it to your phone using the earphone jack or your key chain with the lobster clamp. Its size and flexibility allows you to slip it in your back pocket attached to your phone/or key chain.
Since we made Sticko we both are addicted to it, we have ours attached to our phones and key chains so our Sticko's are constantly in use. The more we use Sticko the more uses we find for it that go way beyond just mounting your smartphone. Every person who saw Sticko added their own twist on uses they thought fit for the little gadget. That's when we realized that people were as amazed and excited about Sticko as we were.
Soon enough our friends and family were asking us for a Sticko of their own. We ordered a small injection mold allowing us to test the final product, and, to give Sticko’s to our friends and family and get their feedback.
So Where Do We Stand Now?
The Sticko's that came back from the injection mold came out perfect, and the feedback we received from those who got to use Sticko was overwhelmingly positive. So we wanted to make them on a larger scale so more people can enjoy Sticko. And that's what brought us to you, to Kickstarter.
With the funds we raise we will be able to invest in a larger production line so that we can share Sticko with you and anyone else who believes in this gadget. We have the final CAD technical drawings of Sticko that we can take to any manufacturer, but since we have already verified the quality and accuracy of the particular manufacturer who built the prototypes , we plan on having Sticko produced by them. They can accommodate small production quantity as well as very large mass production requirements. Once we finish our Kickstarter campaign, we will know exactly how many Sticko's we will need to produce. We will personally inspect each Sticko to make sure it is up to our highest standards. After they pass our quality control we will pack them securely and prepare for shipment. We already have business account with one of the most trusted shipping companies in the U.S. so we will ship Sticko to you A.S.A.P. Sticko will be FREE OF SHIPPING CHARGES anywhere within the U.S.
We are asking for your support so we can share the Sticko lifestyle with you and all your friends and all their friends, you get the point. Your help will allow us to build up a production line. That way we will be able to produce more Sticko's for every gadget that needs mounting.
Thanks for your support!
Oh one more thing, after you get a Sticko, send us pictures of cool and unique uses you think that we would love, so we can share them on Sticko's website and create a real Sticko community.
Can I help in other ways?
Yes! Please spread the word among your friends and family. Share this campaign on Facebook and Twitter. Tell your favorite bloggers about us. Every bit count!
If you like please share:
And for more information contact firstname.lastname@example.org
Risks and challenges
I have significant product development experience, I work side by side with my father Shlomo Zucker who is an accomplished, well known and experienced product designer. Its been over half a year of designing and testing Sticko but we wanted to make sure that Sticko is complete with rigorous performance and durability tests before we launch our Sticko in Kickstarter. Once we got the parts we assembled them by hand and gave it to more than 50 different users to test Sticko in different environments. The feedback we received gave us a lot of confidence that Sticko was ready.
We're very confident that we will deliver our products in superior quality by the projected dates.
We already have established a working relationship with a reliable plastic injection manufacturer and a mold maker, and an experienced contractor to mitigate the risk of delays by material suppliers and to ensure that quality control is implemented to the highest level. We have built test prototypes with our manufacturer and they fully understand our product, specifications and production timeline. While we know there can be unexpected challenges along the way. We will always be transparent and inform our backers of potential hurdles along the way.
We have built in extra time for the manufacturing process and are confident we will ship by the projected dates. We will always keep you informed if things take longer than planned.
We have taken the following steps to ensure that we deliver the best quality product:
- Built over many working prototypes with the established contract manufacturer.
- Extensively tested Sticko for performance and durability. (by more than 100 different users that are using Sticko right now.)
-We preformed an assembly and packaging test run so we know exactly how long it takes.
-We will also refine our packaging. We have several samples, and are currently working with various manufacturers to sort this out.
Once again thank you we appreciate your support!!!Learn about accountability on Kickstarter
Yes there is a pledge for two sticko's
Yes, at the end of the campaign we will send out a survey to get your addresses and color choices.
You can upgrade your pledge.
Sticko's dimensions are 45mmX19mmX14mm. The diameter of the suction cup is 19mm, a little bit bigger than a dime.
Yes, we added all of our backers a sticker per Sticko.
Pledge $3 or more
THANK YOU, for backing us, your name will be up on the wall of fame page in our site.Estimated delivery:
Pledge $6 or more
300 backers All gone!
EARLY BIRD BACKERS. GET One red STICKO with clear suction cups. (already produced and waiting to be shipped first).
free shipping in the U.S.Estimated delivery:Ships anywhere in the world
Pledge $9 or more
The basic Sticko deal- you get one Sticko in RED\GREY color. with black suction cups.
You will also get a Lobster clamp and an Earphone jack string for your little Sticko.
Free shipping in the U.S.Estimated delivery:Ships anywhere in the world
Pledge $17 or more
Mini Tablet Holder Set - Get two Sticko's with BLACK suction cups in Different Color's (RED\GREY). You will also get a string with a Lobster clamp and an earphone jack for each Sticko. free shipping in the U.S.Estimated delivery:Ships anywhere in the world
Pledge $33 or more
Tablet Holder Set - Get Four Sticko's with BLACK suction cups in Different Color's. (RED\GREY)
You will also get a string with a Lobster clamp and an earphone jack for each Sticko.
free shipping in the U.S.Estimated delivery:Ships anywhere in the world
Pledge $40 or more
63 backers Limited (187 left of 250)
Kickstarter EXCLUSIVE special edition - Get Four Sticko's with BLACK suction cups two in GREEN and two in WHITE, All 4 with a printed K logo. You will also get a string with a Lobster clamp and an earphone jack for each Sticko. Free shipping in the U.S.(these two colors with the K logo are only available for this pledge)Estimated delivery:Ships anywhere in the world
Pledge $49 or more
8 backers Limited (92 left of 100)
EXCLUSIVE FOR KICKSTARTER: METALLIC edition - Get Four Sticko's with BLACK suction cups two in GOLD and two in SILVER. You will also get a string with a Lobster clamp and an earphone jack for each Sticko. Free shipping in the U.S.Estimated delivery:Ships anywhere in the world
- (35 days)