プロジェクトをシェア

完了

プロジェクトをシェア

完了
The E370 Quad Morphing VCO is a Eurorack-compatible module containing 4 independent digital voltage-controlled oscillators.
The E370 Quad Morphing VCO is a Eurorack-compatible module containing 4 independent digital voltage-controlled oscillators.
クリエイター
268 人のバッカー$262,850プレッジしました。

クリエイターを応援し、他のバッカーと交流する場として活用ください。

よくあるご質問

FAQ
バッカーのみコメントできます。ログイン
    1. アバターが見つかりません

      Gregory M. O'Drobinak April 2, 2017 上

      Exactly how is "phase mode" being implemented?
      There is now only one output jack, so it appears that one can no longer get quadrature outputs (or any two waves offset by a given angle).
      Also, is the VCA block still there in the 'XY' signal path?
      If so, what input signal is sacrificed (as per the E350 doc) since there are only 5 control jacks shown on the E370 panel mockup?
      Thanks for your detailed reply on this issue!

    2. アバターが見つかりません

      Dan Burke March 19, 2017 上

      Congrats SynthTech!! Congrats everybody! Pleased as punch and swelling with pride to be onboard. ;)

    3. アバターが見つかりません

      Tim Wisecup March 19, 2017 上

      congratulations on the hugely successful kickster campaign! looking forward to following progress, and one day playing with one of these beasts!

    4. Brian Oz
      Superbacker
      March 19, 2017 上

      Ivan - you can state this in the survey that eventually or in a direct message to the project creator

    5. アバターが見つかりません

      Ivan Schwartz March 19, 2017 上

      Please add on to my Early Bird Special a DIY:

      $799 Early Bird Special
      $699 DIY
      $ 30 Shipping

      $1528 Total

    6. アバターが見つかりません

      Jorge Gomez March 19, 2017 上

      can we please travel forward in time faster? November is still too far away!

    7. アバターが見つかりません

      MD March 17, 2017 上

      +1 for black panel :-)

    8. アバターが見つかりません

      Patrick Link March 16, 2017 上

      +1 black panels (option), if possible!

    9. Patrik Rydberg March 15, 2017 上

      Stupid me, of course I needn't have worried about reaching $180k. =)

    10. Stephen 'Einstein' Greco March 15, 2017 上

      Small stretch goal for black panels? Maybe?

    11. アバターが見つかりません

      Kevin March 15, 2017 上

      Fantastic, all unlocked, this is going to be one hefty piece of kit in my set up � Nice one MD for pushing it over the finish line, I think DivKid should get a big � up as it was a bit static at 10K to go before his push and write up ��

    12. アバターが見つかりません

      MD March 15, 2017 上

      I did it, couln't resist to put it over 180k! :-)

    13. アバターが見つかりません

      LoydB March 15, 2017 上

      TZFMmmmmmmmmmm !

    14. Patrik Rydberg March 15, 2017 上

      Ok. ThruZero getting close. If not reached with one day left, can't we all just pledge an additional $5 or so each to secure it? Would be nice!

    15. アバターが見つかりません

      TF March 15, 2017 上

      Fourthing Scala Support.

    16. アバターが見つかりません

      LoydB March 14, 2017 上

      Thirding the scala support.

    17. アバターが見つかりません

      John Loffink March 12, 2017 上

      Seconding the request for user defined scales for the chord mode. The operation is fairly simple:
      1. Load standard Scala *.scl format scale files from the microSD card, in a folder named "Scales."The file contains the ratios or frequencies for every scale degree, with any number of notes per scale.
      2. Allow user to enter the "octave" (may not be 2/1 repeating such as for a Bohlen-Pierce scale, but the concept is still applicable) and scale degree (note) for each chord value.

    18. アバターが見つかりません

      Armando Cajide March 6, 2017 上

      Great ideas guys!

    19. アバターが見つかりません

      Dan Burke March 4, 2017 上

      Thruuu Zeeero!

    20. Stephen 'Einstein' Greco March 2, 2017 上

      Chords Idea: Each new input cycles thru each osc (like Korg Monopoly Poly Arpeggiator)

    21. アバターが見つかりません

      Siem February 27, 2017 上

      Hi Paul,

      Congratulations on reaching this stretch goal!
      I would love something like Stas' idea and it would also be nice if you could control the chord inversions somehow.

    22. アバターが見つかりません

      Nicholas Santos February 27, 2017 上

      With the floating assignments and now chord goals unlocked, is the idea that MOD A and B will have global settings so that MOD A c on Osc1 can be set to global mode and change all 4 oscillators at once, thus freeing up additional mod inputs for chord settings? Or will the chord settings be done by remapping the 1v/Oct inputs as chord modulation?

    23. アバターが見つかりません

      Stas Shtin February 27, 2017 上

      I would love chords mode to support user-defined ratios (not just 12TET steps). This would be useful for xenharmonic compositon or for using it as a single-voice monster additive VCO. Here's how I see it working:

      1. Each chord is defined as as 1-3 ratios (i.e. VCO3&VCO4 may be excluded from chords if their ratios are not set, so they are individually addressable as usual)

      2. User can setup list of chords (i.e. up to 10 chords)

      3. CV1 is used to select chord root

      4. CV2 or coarse2 knob is used to select chord index in chords list

      Ideally there would be chord import/export to SD card.

      Another enhancement would be an option to morph chords, i.e. use CV2 value to interpolate between chord ratios.

    24. アバターが見つかりません

      Armando Cajide February 26, 2017 上

      Just got 2 early birds. Hope we get all the stretch goals! :)

    25. アバターが見つかりません

      Geoffrey Carter February 23, 2017 上

      Thank you for posting your upgrade, ddxcm!

    26. アバターが見つかりません

      drxcm February 23, 2017 上

      One earlybird now available- i upgraded to 2x

    27. アバターが見つかりません

      Patrick Link February 22, 2017 上

      I've upgraded from an EarlyBird slot to a 2x Early Bird, thereby freeing up 1 Early Bird (you're welcome whomever you are). I'd really like to see that Thru-Zero stretch goal reached!

    28. Paul Schreiber クリエイター February 22, 2017 上

      Certainly, if the CHORDS option funds, we will be asking for inputs to what people want it to do, exactly. Please post any ideas like this here.

    29. Damien Higdon February 21, 2017 上

      The Chords mode brings a few things to mind. Would it be possible to allow the system VCO setting to include an additional 3+1 (triad, solo) configuration, while also allowing Chord mode to be a selectable option for triads (and pairs), so we can effectively have 3-note chords play while leaving the 4th VCO for solo/lead, and assignable to a different oscillator type?

    30. Brian Oz
      Superbacker
      February 21, 2017 上

      Gah. Previous comment should say:

      This would NOT be the first time Paul was responsible for people expanding their setup and getting new cases.

    31. Brian Oz
      Superbacker
      February 21, 2017 上

      Heh. This would be the first time Paul was responsible for people expanding their setup and getting new cases.

    32. アバターが見つかりません

      LoydB February 21, 2017 上

      I give up. I've backed it, knowing full well I don't have space for it :) New case time!

    33. Paul Schreiber クリエイター February 19, 2017 上

      That's a great idea! Added to list of feature requests.

    34. Guido Heye February 19, 2017 上

      Hey Paul, if there's room on the flash, you should maybe include a list of pledgers, would be cool!

    35. Paul Schreiber クリエイター February 18, 2017 上

      Eric & I talked and we will be able to "tune in" voltages from about 0.95V/OCT to 1.25V/OCT. So, you are all set!

    36. Paul Schreiber クリエイター February 18, 2017 上

      We will see how much work is needed to add 1.2V/Oct tracking as an option.

    37. Patrick McMaster February 18, 2017 上

      Congratulations Paul - would it be possible to add support for 1.2V/OCT tracking in the firmware for all of the Buchla folks? Thanks!

    38. Paul Schreiber クリエイター February 17, 2017 上

      Yes, the only thing to remember is each VCO has 1 audio output (unlike the E340 that has 2).

      But yes, 32 VCOs all going at the same time.

    39. Syruss Flyte February 17, 2017 上

      So, if I'm reading correctly, I could set each of the 4 VCOs to cloud, with up to 8 virtual VCO's per cloud?... So effectively it can function as 4 E340's ?!? Can we say 'drone-y, ambient, awesomeness"? I mean, I was already sold, and backed before bothering to read everything, but now I'm even more excited about this project… except that I'm going to need another eurorack case now.

    40. アバターが見つかりません

      Travis February 17, 2017 上

      Beyond stoked! \m/

    41. アバターが見つかりません

      Lou Rawls February 17, 2017 上

      Keep up the good work!

    42. アバターが見つかりません

      Kevin February 17, 2017 上

      I'm in � very excited to be a backer ��

    43. Greg Carson February 17, 2017 上

      Sounds amazing -- and this is just the prototype. Can't wait!!

    44. Paul Schreiber クリエイター February 17, 2017 上

      It's going to fund! I have a great feeling and thanks to everyone this first 15 minutes!

    45. Brian Oz
      Superbacker
      February 17, 2017 上

      Very excited for this!! Can't wait to see how far this project goes.