Andere über dieses Projekt informieren

Fertig

Andere über dieses Projekt informieren

Fertig
The E370 Quad Morphing VCO is a Eurorack-compatible module containing 4 independent digital voltage-controlled oscillators.
The E370 Quad Morphing VCO is a Eurorack-compatible module containing 4 independent digital voltage-controlled oscillators.
268 Unterstützer haben 262.850 $ beigetragen, um dieses Projekt zu verwirklichen.

Hier kannst du den Projektgründer anfeuern oder dich mit anderen Unterstützern austauschen.

Noch Fragen?

Kommentare können nur von Unterstützern des Projekts hinterlassen werden. anmelden
    1. Avatar fehlt

      Gregory M. O'Drobinak am

      Exactly how is "phase mode" being implemented?
      There is now only one output jack, so it appears that one can no longer get quadrature outputs (or any two waves offset by a given angle).
      Also, is the VCA block still there in the 'XY' signal path?
      If so, what input signal is sacrificed (as per the E350 doc) since there are only 5 control jacks shown on the E370 panel mockup?
      Thanks for your detailed reply on this issue!

    2. Avatar fehlt

      Dan Burke am

      Congrats SynthTech!! Congrats everybody! Pleased as punch and swelling with pride to be onboard. ;)

    3. Avatar fehlt

      Tim Wisecup am

      congratulations on the hugely successful kickster campaign! looking forward to following progress, and one day playing with one of these beasts!

    4. Brian Oz
      Superbacker
      am

      Ivan - you can state this in the survey that eventually or in a direct message to the project creator

    5. Avatar fehlt

      Ivan Schwartz am

      Please add on to my Early Bird Special a DIY:

      $799 Early Bird Special
      $699 DIY
      $ 30 Shipping

      $1528 Total

    6. Avatar fehlt

      Jorge Gomez am

      can we please travel forward in time faster? November is still too far away!

    7. Avatar fehlt

      MD am

      +1 for black panel :-)

    8. Avatar fehlt

      Patrick Link am

      +1 black panels (option), if possible!

    9. Patrik Rydberg am

      Stupid me, of course I needn't have worried about reaching $180k. =)

    10. Stephen 'Einstein' Greco am

      Small stretch goal for black panels? Maybe?

    11. Avatar fehlt

      Kevin am

      Fantastic, all unlocked, this is going to be one hefty piece of kit in my set up � Nice one MD for pushing it over the finish line, I think DivKid should get a big � up as it was a bit static at 10K to go before his push and write up ��

    12. Avatar fehlt

      MD am

      I did it, couln't resist to put it over 180k! :-)

    13. LoydB am

      TZFMmmmmmmmmmm !

    14. Patrik Rydberg am

      Ok. ThruZero getting close. If not reached with one day left, can't we all just pledge an additional $5 or so each to secure it? Would be nice!

    15. Avatar fehlt

      TF am

      Fourthing Scala Support.

    16. LoydB am

      Thirding the scala support.

    17. Avatar fehlt

      John Loffink am

      Seconding the request for user defined scales for the chord mode. The operation is fairly simple:
      1. Load standard Scala *.scl format scale files from the microSD card, in a folder named "Scales."The file contains the ratios or frequencies for every scale degree, with any number of notes per scale.
      2. Allow user to enter the "octave" (may not be 2/1 repeating such as for a Bohlen-Pierce scale, but the concept is still applicable) and scale degree (note) for each chord value.

    18. Avatar fehlt

      Armando Cajide am

      Great ideas guys!

    19. Avatar fehlt

      Dan Burke am

      Thruuu Zeeero!

    20. Stephen 'Einstein' Greco am

      Chords Idea: Each new input cycles thru each osc (like Korg Monopoly Poly Arpeggiator)

    21. Avatar fehlt

      Siem am

      Hi Paul,

      Congratulations on reaching this stretch goal!
      I would love something like Stas' idea and it would also be nice if you could control the chord inversions somehow.

    22. Avatar fehlt

      Nicholas Santos am

      With the floating assignments and now chord goals unlocked, is the idea that MOD A and B will have global settings so that MOD A c on Osc1 can be set to global mode and change all 4 oscillators at once, thus freeing up additional mod inputs for chord settings? Or will the chord settings be done by remapping the 1v/Oct inputs as chord modulation?

    23. Avatar fehlt

      Stas Shtin am

      I would love chords mode to support user-defined ratios (not just 12TET steps). This would be useful for xenharmonic compositon or for using it as a single-voice monster additive VCO. Here's how I see it working:

      1. Each chord is defined as as 1-3 ratios (i.e. VCO3&VCO4 may be excluded from chords if their ratios are not set, so they are individually addressable as usual)

      2. User can setup list of chords (i.e. up to 10 chords)

      3. CV1 is used to select chord root

      4. CV2 or coarse2 knob is used to select chord index in chords list

      Ideally there would be chord import/export to SD card.

      Another enhancement would be an option to morph chords, i.e. use CV2 value to interpolate between chord ratios.

    24. Avatar fehlt

      Armando Cajide am

      Just got 2 early birds. Hope we get all the stretch goals! :)

    25. Avatar fehlt

      Geoffrey Carter am

      Thank you for posting your upgrade, ddxcm!

    26. Avatar fehlt

      drxcm am

      One earlybird now available- i upgraded to 2x

    27. Avatar fehlt

      Patrick Link am

      I've upgraded from an EarlyBird slot to a 2x Early Bird, thereby freeing up 1 Early Bird (you're welcome whomever you are). I'd really like to see that Thru-Zero stretch goal reached!

    28. Paul Schreiber Projektgründer am

      Certainly, if the CHORDS option funds, we will be asking for inputs to what people want it to do, exactly. Please post any ideas like this here.

    29. Damien Higdon am

      The Chords mode brings a few things to mind. Would it be possible to allow the system VCO setting to include an additional 3+1 (triad, solo) configuration, while also allowing Chord mode to be a selectable option for triads (and pairs), so we can effectively have 3-note chords play while leaving the 4th VCO for solo/lead, and assignable to a different oscillator type?

    30. Brian Oz
      Superbacker
      am

      Gah. Previous comment should say:

      This would NOT be the first time Paul was responsible for people expanding their setup and getting new cases.

    31. Brian Oz
      Superbacker
      am

      Heh. This would be the first time Paul was responsible for people expanding their setup and getting new cases.

    32. LoydB am

      I give up. I've backed it, knowing full well I don't have space for it :) New case time!

    33. Paul Schreiber Projektgründer am

      That's a great idea! Added to list of feature requests.

    34. Guido Heye am

      Hey Paul, if there's room on the flash, you should maybe include a list of pledgers, would be cool!

    35. Paul Schreiber Projektgründer am

      Eric & I talked and we will be able to "tune in" voltages from about 0.95V/OCT to 1.25V/OCT. So, you are all set!

    36. Paul Schreiber Projektgründer am

      We will see how much work is needed to add 1.2V/Oct tracking as an option.

    37. Patrick McMaster am

      Congratulations Paul - would it be possible to add support for 1.2V/OCT tracking in the firmware for all of the Buchla folks? Thanks!

    38. Paul Schreiber Projektgründer am

      Yes, the only thing to remember is each VCO has 1 audio output (unlike the E340 that has 2).

      But yes, 32 VCOs all going at the same time.

    39. Syruss Flyte am

      So, if I'm reading correctly, I could set each of the 4 VCOs to cloud, with up to 8 virtual VCO's per cloud?... So effectively it can function as 4 E340's ?!? Can we say 'drone-y, ambient, awesomeness"? I mean, I was already sold, and backed before bothering to read everything, but now I'm even more excited about this project… except that I'm going to need another eurorack case now.

    40. Avatar fehlt

      Travis am

      Beyond stoked! \m/

    41. Avatar fehlt

      Lou Rawls am

      Keep up the good work!

    42. Avatar fehlt

      Kevin am

      I'm in � very excited to be a backer ��

    43. Greg Carson am

      Sounds amazing -- and this is just the prototype. Can't wait!!

    44. Paul Schreiber Projektgründer am

      It's going to fund! I have a great feeling and thanks to everyone this first 15 minutes!

    45. Brian Oz
      Superbacker
      am

      Very excited for this!! Can't wait to see how far this project goes.