Join with us, for the World's Very First Bamboo Wood Single-Dual Motor Switchable Electric Skateboard--Buffalo
Electric skateboards work best in cities with a very complex network of roads and transport systems. It lets you go from point A to point B in a matter of minutes without breaking a sweat. It also gives you the chance to complete your commute in areas where trains or buses don’t usually go. And the best part is, it goes through the narrowest of streets and paths, making it easy to avoid traffic. While there have been lots of powered boards available, Buffalo is trying to change the game with its dual-powered motor system that gives you the needed boost at your disposal.
Built to be tough, Buffalo comes with durable parts as standard. Dual electric motors rated at 1200 watts each deliver direct power to the base wheels, able to propel Buffalo forward at up to 38 km per hour. The elastic deck board offers a stable yet compliant ride even on rough surfaces – this is made possible by a bending mechanism that works similar to an expansion joint on the highway. The longboard is made from flexible yet sturdy bamboo to save weight while keeping its durability over time. It’s even tested to work in wet and gravel surfaces, so it’s really up to you where should you go next with this powered board.
If you live in a hilly terrain, Buffalo will make it easier for you to roam around the streets. It’s rated to ride roads up to 22% incline – helpful for everyday hilly streets or just ramping up. With a built-in regenerative braking feature, you can go further whenever you press the brake on its handheld controller. This feature allows the battery to recharge as you brake, so it’s even more convenient to stay further away from the socket much longer.
Buffalo F1 has two versions: Buffalo F1 (S) and Buffalo F1 (D).
Buffalo F1 (S) with single motor and Buffalo F1 (D) with dual motors.
If you would like to find a cheap and top-of-the-line electric skateboard for Christmas gift for yourself and your friends, please follow us!
If you share our Buffalo kickstarter page to any social networking sites, like Facebook, Twitter, and so on. And also send the sharing screenshot to our E-mail: email@example.com, you will get a tiny finger maple skateboard free. (Every ID can only get one. )
If you share our Buffalo kickstater page, buy our Buffalo skateboard F1(S) or Buffalo skateboard F1(D) and also send the sharing screenshot to our E-mail: firstname.lastname@example.org, you will get 4 new buffalo wheels free. (Every ID can only get one.)
Single-Dual Motor Switchable Function
Super Elastic Deck & Silicon Battery Box
It has the most elastic deck and battery box. When you stand on the board and jump, the deck and battery box will bend by leaps and bounds as your movement.
Bamboo Wood Deck
For Enviromental Protection, Better Elastic Performance and Long-term Usage
Solid Wheels with High Elasticity
Super Flexible Truck
Strict Test for Safety And Quality
Top Speed: 38 KM/H
Uphill Percentage: 22%
Why we insist on designing longboard, not short one?
Longboard is more professioal and elastic than short one. What's more, most famous electric skateboard brands choose longboard.
Why we don't use lithium polymer battery?
How do we make Buffalo F1 super elastic?
Safety is a top priority for Buffalo. Its built-in LED headlights and taillights marks your presence on the road at all times. With just a push of a button on the handheld controller, you can steer clear of other motorists or make your presence by signaling through the LED lamps on the board. There are also three riding modes available, depending on your riding skill level. The Beginner mode limits the speed and adjusts the ride’s acceleration, so you can easily adjust to the board without falling down at first attempts. Moving on to the Cruise and Advanced modes, you can set the speed and acceleration depending on the traffic or environment conditions, and you can unleash the board’s full potential – both in driving distance and throttle adjustments.
The Buffalo electric powered skateboard makes it easier to cruise along the city streets, thanks to a powerful dual motor and a set of smart features.
1.Testing process : Strict testing process (vibration test, drop test, loading test, battery charge and discharge test, motor test, synthetic test, static load test or one-side drop test) makes it safer than any other electric skateboards.
2. Regenerative braking: Regenerative braking allows for riding in control. When braking the Buffalo F1 motor makes use of this extra energy by charging your battery
3. 18650 LG Lithium Battery
4. An illuminated experience: Easy Controlable LED Headlights and Taillights
5. While we at Buffalo want you to have endless fun with our product, we also encourage you to wear important safety gears like helmet, wrist pads, knee protactors…as well as watch out for vehicles and other dangers.
BUFFALO has three modes for slow riding, cruising, and fast riding.
- Beginner Mode: Learning to ride? Set BUFFALO to Beginner Mode. Top speed in Beginner Mode: 18km/h (D).
- Cruise Mode: Moving across town with normal traffic? Set BUFFALO to Cruise Mode. In Cuise Mode, the power output is just right for riding at a moderate pace. The rider can adjust its speed and acceleration to ensure the most range of the board given the current riding conditions. Top speed in Cruise Mode:20km/h (D).
- Advanced Mode: When you’re ready to take your riding to the next level, our Advanced mode gives the rider more acceleration. Top speed in Advanced Mode: 38km/h (D).
How do I change the mode?
When you turn on the board you are automatically in Beginner Mode which has a max speed of 20km/h. Advanced Mode has max 38km/h.
To switch between modes, hold the joystick forward as you turn on the remote and wait till the lights on and let go of the button and joystick. You can hear the difference between the two speeds if you lift your board off the ground and listen to the motor. When you turn it off, it will always go back to Beginner Mode. Get use to always turning it off while changing the modes.
We offer every Kickstarter backers one-year warranty.
With every pledge level that includes a board you will receive:
Buffalo Electric Board - completely assembled and ready to roll.
Buffalo Wireless Handheld Controller - synced and ready to run.
USB Cable - for charging the Handheld Controller
Charger - for charging the Buffalo Board
T-tool - to adjust your board
Manual - User's Guide
Thank you for your attention, if you have further questions, please feel free to send us mail: email@example.com, we will response as soon as possible!
Is the Buffalo E-Board waterproof?
Buffalo e-board is IP 44.(Protection against solid bodies geeater than 1 mm and spray from all directions)
Where can I get replacement parts?
All replacement parts are available on our online shop. All maintenance parts will be available through our customer service: firstname.lastname@example.org.
What is the warranty?
All board rewards will come with a one-year warranty on manufacturing defects from the day received.
Can I swap my own deck? Can I just get a kit?
No. The deck is modified to fit exactly with the battery box and to have the right flex.
When is the shipping?
As soon as Crowdfunding ended, we will arrange the shipment.
We invite you to become Buffalo Electric Skateboard affiliate and grow with us.
About Affiliate Program
If you run your own business for sports or other items, and think you can sell Buffalo E boards to your clients, or you own a website and would like to make your website profitable, you can apply to become an affiliate partner with us.
Why do you join us?
Buffalo Technology Inc is specialized in research and manufacturing our own patent, cutting edge tech E boards, each season will have at least new product come into market. All products will be stocked in our USA warehouse, can ship out quickly based on dropship orders. Buffalo Technology Inc will be ready for any after sell service for every boards sold within 6 months. Will provide Affiliate with very competitive price for success sell in market. Start earning money with Buffalo now!
We have give the recommend lowest price for all the Affiliate to avoiding vicious competition.
For more information and any other question please contact us: email@example.com.
Risks and challenges
Designing a product that contains mechanical, electrical and electronic constraints is not easy. We understand that delays happen and things may take a little longer than expected.
We're always planning ahead to bypass potential delays. For an on-time delivery, we're working to solve potential production problems now. Things like:
Finishing the design of a new remote control with a larger slider to improve accuracy while braking and speeding up. We will then have to adapt the software and solve the remaining small bugs to reach the perfect settings.
It takes about 2 months to pass FCC/CE certifications. It could take 1 more month if we fail some tests in the first try. We've started the conversation early and hope to have the certification by the end of this campaign.
Any small modification may be necessary, and we reserve all the right for the final explanation.Learn about accountability on Kickstarter
- (30 days)