Share this project

Done

Share this project

Done
Make your own geometric concrete wall tile for your home or business using our simple kit and quality tools.
Make your own geometric concrete wall tile for your home or business using our simple kit and quality tools.
Make your own geometric concrete wall tile for your home or business using our simple kit and quality tools.
78 backers pledged $18,907 to help bring this project to life.

About this project

Geometric Concrete Tile Kit by Conservatory of Craft project video thumbnail
Replay with sound
Play with
sound

Geometric Concrete Tile Kit by Conservatory of Craft

$18,907

78

How to calculate how much Maker Mix you will need:

Each 20 lb bag of Maker Mix makes 4 square feet of tile, or 7 tiles. To calculate how many bags of Maker Mix you will need first measure the wall, calculate the square footage, and divide by four. For example, if you are going to tile your kitchen backsplash and the area is 10' x 2' then you will need to cast 20 square feet of tile, so you will need 5 bags of Maker Mix.

Below are photos of the products:

Risks and challenges

There are zero risks or challenges for this project. We have been in business since 2004 and these are the exact products, tools, and molds that we use in our studio each and every day.

Learn about accountability on Kickstarter

Questions about this project? Check out the FAQ

Support this project

  1. Select this reward

    Pledge $109 or more About $109

    BASICS 01:

    + 1 (one) Geometric Concrete Mold Tray. Each mold tray makes two tiles that are approximately 9" x 9" each (229mm x 229mm).

    + Link to video tutorial on how to mix, cast, finish and install the tile.

    + Free shipping.

    (Note: Free Shipping is to the contiguous US only, Alaska, Hawaii and Puerto Rico shipping is additional.)

    Less
    Estimated delivery
    Ships to Only United States
    39 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge $210 or more About $210

    DIY LEVEL:

    + 1 (one) Geometric Concrete Mold Tray. Each mold tray makes two tiles that are approximately 9" x 9" each (229mm x 229mm).

    + 2 (two) 20 lb bags of Maker Mix, our proprietary blend of Ultra High Performance Concrete.

    + 2 (two) 0.5 lb packs of Alkali-Resistant Glass Fiber. This is the reinforcement used in the Maker Mix.

    + 1 (one) can of Mold Release. This is sprayed into the molds so the concrete tiles do not stick.

    + Link to video tutorial on how to mix, cast, finish and install the tile.

    + Free shipping.

    (Note: Free Shipping is to the contiguous US only, Alaska, Hawaii and Puerto Rico shipping is additional.)

    Less
    Estimated delivery
    Ships to Only United States
    6 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Select this reward

    Pledge $375 or more About $375

    BASICS 02:

    + 4 (four) Geometric Concrete Mold Trays. Each mold tray makes two tiles that are approximately 9" x 9" each (229mm x 229mm).

    + Link to video tutorial on how to mix, cast, finish and install the tile.

    + Free shipping.

    (Note: Free Shipping is to the contiguous US only, Alaska, Hawaii and Puerto Rico shipping is additional.)

    Less
    Estimated delivery
    Ships to Only United States
    15 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  4. Select this reward

    Pledge $375 or more About $375

    DIY PLUS LEVEL:

    + 2 (two) Geometric Concrete Mold Trays. Each mold tray makes two tiles that are approximately 9" x 9" each (229mm x 229mm).

    + 2 (two) 20 lb bags of Maker Mix, our proprietary blend of Ultra High Performance Concrete.

    + 2 (two) 0.5 lb packs of Alkali-Resistant Glass Fiber. This is the reinforcement used in the Maker Mix.

    + 1 (one) can of Mold Release. This is sprayed into the molds so the concrete tiles do not stick.

    + 3 (three) 1 lb packs of color pigment. One of each of the following colors: Flora, Stone, and Earth.

    + 1 (one) set of concrete polishing pads. Each set contains two pads, a 60 grit and a 120 grit.

    + Link to video tutorial on how to mix, cast, finish and install the tile.

    + Free shipping.

    (Note: Free Shipping is to the contiguous US only, Alaska, Hawaii and Puerto Rico shipping is additional.)

    Less
    Estimated delivery
    Ships to Only United States
    8 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  5. Select this reward

    Pledge $570 or more About $570

    BASICS 03:

    + 7 (seven) Geometric Concrete Mold Trays. Each mold tray makes two tiles that are approximately 9" x 9" each (229mm x 229mm).

    + Link to video tutorial on how to mix, cast, finish and install the tile.

    + Free shipping.

    (Note: Free Shipping is to the contiguous US only, Alaska, Hawaii and Puerto Rico shipping is additional.)

    Less
    Estimated delivery
    Ships to Only United States
    4 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  6. Select this reward

    Pledge $670 or more About $670

    MAKER LEVEL:

    + 4 (four) Geometric Concrete Mold Trays. Each mold tray makes two tiles that are approximately 9" x 9" each (229mm x 229mm).

    + 4 (four) 20 lb bags of Maker Mix, our proprietary blend of Ultra High Performance Concrete.

    + 4 (four) 0.5 lb packs of Alkali-Resistant Glass Fiber. This is the reinforcement used in the Maker Mix.

    + 1 (one) can of Mold Release. This is sprayed into the molds so the concrete tiles do not stick.

    + 3 (three) 1 lb packs of color pigment. One of each of the following colors: Flora, Stone, and Earth.

    + 1 (one) set of concrete polishing pads. Each set contains two pads, a 60 grit and a 120 grit.

    + 1 (one) Conservatory of Craft Apron.

    + Link to video tutorial on how to mix, cast, finish and install the tile.

    + Free shipping.

    (Note: Free Shipping is to the contiguous US only, Alaska, Hawaii and Puerto Rico shipping is additional.)

    Less
    Estimated delivery
    Ships to Only United States
    2 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  7. Select this reward

    Pledge $1,015 or more About $1,015

    MAKER PLUS LEVEL:

    + 4 (four) Geometric Concrete Mold Trays. Each mold tray makes two tiles that are approximately 9" x 9" each (229mm x 229mm).

    + 4 (four) 20 lb bags of Maker Mix, our proprietary blend of Ultra High Performance Concrete.

    + 4 (four) 0.5 lb packs of Alkali-Resistant Glass Fiber. This is the reinforcement used in the Maker Mix.

    + 1 (one) can of Mold Release. This is sprayed into the molds so the concrete tiles do not stick.

    + 3 (three) 1 lb packs of color pigment. One of each of the following colors: Flora, Stone, and Earth.

    + 1 (one) set of concrete polishing pads. Each set contains two pads, a 60 grit and a 120 grit.

    + 1 (one) Conservatory of Craft Apron.

    + 1 (one) Collomix X01 Handheld Mixer. This is the same mixer we use in our professional studio to mix concrete every day.

    + Link to video tutorial on how to mix, cast, finish and install the tile.

    + Free shipping.

    (Note: Free Shipping is to the contiguous US only, Alaska, Hawaii and Puerto Rico shipping is additional.)

    Less
    Estimated delivery
    Ships to Only United States
    1 backer
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  8. Select this reward

    Pledge $1,415 or more About $1,415

    PROFESSIONAL LEVEL:

    + 7 (seven) Geometric Concrete Mold Trays. Each mold tray makes two tiles that are approximately 9" x 9" each (229mm x 229mm).

    + 8 (eight) 20 lb bags of Maker Mix, our proprietary blend of Ultra High Performance Concrete.

    + 8 (eight) 0.5 lb packs of Alkali-Resistant Glass Fiber. This is the reinforcement used in the Maker Mix.

    + 3 (three) cans of Mold Release. This is sprayed into the molds so the concrete tiles do not stick.

    + 3 (three) 1 lb packs of color pigment. One of each of the following colors: Flora, Stone, and Earth.

    + 1 (one) set of concrete polishing pads. Each set contains two pads, a 60 grit and a 120 grit.

    + 1 (one) Conservatory of Craft Apron.

    + 1 (one) Collomix X01 Handheld Mixer. This is the same mixer we use in our professional studio to mix concrete every day.

    + Link to video tutorial on how to mix, cast, finish and install the tile.

    + Free shipping.

    (Note: Free Shipping is to the contiguous US only, Alaska, Hawaii and Puerto Rico shipping is additional.)

    Less
    Estimated delivery
    Ships to Only United States
    0 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.

Funding period

- (30 days)