Project image
)}
£788
pledged of £365pledged of £365 goal
50
backers
66hours to go

All or nothing. This project will only be funded if it reaches its goal by Sun, February 24 2019 2:47 PM UTC +00:00.

Chifen & EwanBy Chifen & Ewan
First created
Chifen & EwanBy Chifen & Ewan
First created
£788
pledged of £365pledged of £365 goal
50
backers
66hours to go

All or nothing. This project will only be funded if it reaches its goal by Sun, February 24 2019 2:47 PM UTC +00:00.

About

🙋🏻🙋🏻‍♂️

We are Chifen & Ewan. We designed a photo and note holder and we need your help to bring this design to your home. We are two second year MA students in Design Products at the Royal College of Art. Usually we’re working on big serious problems like e-waste and air pollution, but this year we’ve had the opportunity to join a Quickstarter workshop run by Oscar Lhermitte, a Kickstarter Thought Leader responsible for campaigns like TAPE ✂️ STICKERS and MOON. But enough about our tutor and let’s talk about Matilda!

Meet Matilda
Meet Matilda

Today we spend a lot of time at our desk—you’re probably doing it right now while reading this—it can feel a little bit lonely sometimes so we designed a playful photo & note holder that you can interact with, as we both believe in the usefulness of simple objects. With a little tap 👆, Matilda swings left to right about 10 times calling for your attention. We think this little interaction can bring a smile to your face. This is not scientifically proven as we’re not scientists, but it works on us, on our classmates, and on our school's workshop technicians & tutors. In the end, we’re all humans so we believe it will work on you.  

What can I use it for?

It can hold pictures of your favourite people 👩

"hellooo"
"hellooo"

It can remind you of your to-dos ✏️

"remember to book a laser slot"
"remember to book a laser slot"

It can hold a recipe in your kitchen 🌶

"mix the ingredients with balsamic vinegar"
"mix the ingredients with balsamic vinegar"

It can hold a shopping list right by your door 📝

"don't forget to buy eggs"
"don't forget to buy eggs"

It can hold a postcard on your side table. 🌁

"remember this nice Matisse?"
"remember this nice Matisse?"

Or use your creativity! Matilda can hold anything! (as long as it's thin and flat.) 

What to do when you receive it 📭

Matilda will be flat shipped to you as we wanted to reduce the shipping cost to the minimum and to reduce our carbon footprint because we love our planet.

To fold Matilda into shape, simply align the two holes along the edge of the table and bend. We’ve included a little instruction card to walk you through the bending process but here’s a GIF to show you how simple it is.  

Let’s get nitty gritty technical 📏

Matilda is made by laser cutting stainless steel. We chose type 316 stainless steel because it is resistant to oxidation and corrosion, and we chose mirror finish because we think it looks quite attractive when it swings back and forth, reflecting the light. We want to offer you an object that’s durable but easy enough to bend yourself, so it’s 0.5mm thick. The material is sourced locally and produced by a manufacturer located right in the middle of the UK.

Specifications

  • Flat: 105mm x 105mm x 0.7mm
  • Folded: 105mm x ~70mm x ~60mm
  • Weight: 80g
  • Material: 316 Stainless steel
  • Thickness: 0.5mm
  • Finish: Mirror polished (only one side will be scratch-free due to the manufacturing process, so make that the front!)

Rewards

£1 or more: Thank you 🙏

"thank u!"
"thank u!"

£12 or more: one Matilda + one Postcard/Instructions 👀 

£20 or more: two Matildas + two Postcard/Instructions 👀👀

Milestones and dates 🏂 

We are both graduating from our MA degree at the Royal College of Art this June, so we’re going to be shipping the orders in summer.

October – December 2018: research, ideas, prototypes and sourcing suppliers 
January 2019: Building campaign
February 2019: Launching of Kickstarter (Quickstarter) campaign 
March 2019: End of campaign and hopefully took your money to place a purchase order 
April 2019: 4 weeks production lead time 
May 2019: Quality control
June 2019: Graduation!!! 
August 2019: Ready to dispatch all rewards 
September 2019: Matilda is waving at you right now!

Budget and Shipping 💸 

We’re raising the amount required for a minimum production of 100 units. If you like Matilda, you just have to pay a small amount for the shipping which varies depending on your receiving destination, see details when you click the “Back this project” button. Unfortunately, we do not ship to North and South Pole.

Matilda's prototype friends
Matilda's prototype friends

Risks and challenges

We both have working experience prior to studying at the Royal College of Art. Individually, we have designed and delivered products for companies ranging from Umbra to M&S. We understand the risks of running a Quickstarter campaign alongside our academic deadlines and this is why we want to ship after our graduation to make sure that we deliver the best product to you with minimal risk. In the nature of Quickstarter, we've designed Matilda to be as simple as possible to manufacture. This is why we chose a design that consists of one part made by one factory. Throughout the process, we will keep you posted of every milestone.

Learn about accountability on Kickstarter

Questions about this project? Check out the FAQ

Support

  1. Make a pledge without a reward

    £
    About $13
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge £1 or more About $1.30

    Thanks!

    You like Matilda, but you went over your monthly budget, and you already have lots of boring static picture frames. You just want to support us and hear our updates. Thanks!

    Less
    Estimated delivery
    3 backers
    £
    About $1.30
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Select this reward

    Pledge £12 or more About $16

    1 x Matilda Note & Photo Stand

    One Matilda stand for waving your notes and photos.

    Matilda is laser cut from mirror-finish 0.5mm stainless steel sheet. She is shipped flat with a sample postcard that doubles as the instructions on how to fold her into shape yourself.

    All shipped in a shiny, bubbly envelope.

    Includes:
    • Matilda Note Stand
    • Matilda Postcard and Instructions
    Less
    Estimated delivery
    Ships to Only certain countries
    30 backers
    £
    About $16
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  4. Select this reward

    Pledge £22 or more About $29

    2 x Matilda Note & Photo Stands

    Two Matilda stands for waving your notes and photos.

    Matilda is laser cut from mirror-finish 0.5mm stainless steel sheet. She is shipped flat with a sample postcard that doubles as the instructions on how to fold her into shape yourself.

    Two stands and two postcards shipped in one shiny, bubbly envelope.

    Includes:
    • Matilda Note Stand
    • Matilda Postcard and Instructions
    Less
    Estimated delivery
    Ships to Only certain countries
    12 backers
    £
    About $29
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.