UPDATE: We now support 100-240 VAC and 50-60 Hz! You'll need an adapter from North American two-prong plug but you won't need a voltage converter.

Although we posted that the Ubi will work right now with 110 V, the interest we’ve received has led us to vigorously investigate worldwide voltage support for the Ubi. We hope to have some good news soon so stay posted!

The Ubi will tie into many of the capabilities of Android for voice search and text to speech / speech to text. However, we’ll be adding quite a number of capabilities that will be required to use Android without any visual feedback or touch input. This means automatically switching between applications and driving events through voice input. It also means outputting through speech.

The Ubi is being designed to allow for later versions of Android to be automatically downloaded and installed. We’re working to ensure minimal disruption and physical input required to do this.

Our current version of the Ubi supports English only. We plan on making other languages supported as Android is updated to support non-English voice input.

No promises yet but we’ll keep it in mind. This would be a cool feature to have.

While we’re not planning on shipping Ubi with this functionality, the capability to connect to other Android or wifi devices is built in to the Ubi.

The Ubi will come with Bluetooth 4.0. While we don’t plan on having this feature available yet, we will be supplying an SDK that will give developers the ability to build apps that can do this.

Kickstarter backers are helping us get CE approval for the Ubi. This certification should give confidence for the Ubi to be used safely. We are planning on having surge protection / isolation built-in to the internal power supply. In short, yes!

The Ubi comes with its own app that wraps around the functionality of Android and ensures that it can be used without a screen or touch input (it’s handsfree, after all). We’re working to include Skype as an app that’s pre-loaded onto the device. We envision many Android apps specifically designed for screen free / handsfree input being developed and downloaded to the Ubi. These would need to be loaded onto the Ubi remotely through terminal access or through the Ubi app on another phone / computer.

We love IFTTT. We’re hoping to include the Ubi in the IFTTT recipes. Barring that, we’re developing a web portal that will have similar plugs and an API for connected to other software.

No service contracts needed! The Ubi uses your own wireless Internet connection to go online. To call phones either in North America or overseas, you may require a Skype or Google Voice account.

Since something that’s always listening can evoke a lot of privacy concerns, we’re making sure that we provide a lot of choice to enable or disable different features on the Ubi.

Ubi uses voice search in a similar manner to how Android devices and iPhones use voice search. While we plan on having the voice processed locally on the Ubi, some voice searches may go through Google servers to be processed for searches, similar to how Android phones function. This data is encrypted.

The Ubi can always be muted and the microphone disabled through voice commands or with the button on the front of the device. While the Ubi is always listening, it’s really listening for it’s name before it starts a search or activity. Saying “Ubi” alerts it to an upcoming command, like searching the Internet, making a call, etc.

Otherwise, unless the Ubi is setup to stream sound, the Ubi will not record actual sounds. However, the Ubi will stream sound level data (dB level). This information, along with temperature, humidity, and ambient light is encrypted and sent to a web portal we’re developing. It is possible to disable this feature or to stream this data to a different server, to Google Drive, or some other service. This information will not be shared with other sources and we do not plan on requiring a subscription for our Kickstarter backers to access the portal.

We don’t believe a project like the Ubi would have been possible only a year ago but we’re confident that we’re now at a point where we can use existing services for speech recognition. Some examples of Google voice recognition in noisy environments can be seen here:

http://www.youtube.com/watch?v=fHkhp6BwnGo%C2%A0

We also believe that this technology is now improving at a fast enough pace to make using the Ubi a better and better experience once it’s released: http://www.youtube.com/watch?v=-cZ4mdrlWYM

Internet search, speakerphone (through Skype and Google Talk), indicator / event light, home speaker system, virtual assistant, alarm clock, intercom, room monitor, and sensor monitor. Coupling all these together will be an app that turns what would normally be displayed in text and graphics into voice. The Ubi will also handle downloading updates and apps from Google Play.

Our prototype’s microphone sensitivity is -40 dBV/Pa ±3 dB. In our tests, it could pick up regular volume voices from 15 ft away.

Smart phones, tablets, and the Ubi complement each other. There are, however, some fundamental differences in the capabilities and applications of the Ubi compared to other devices. Ubi is always on, always ready, always listening to its environment (unless you want it to close its ears). Phones and tablets need charging and require your hands to use. Ubi is meant to be placed in a fixed location and always accessible with voice whereas our phones are sometimes not the easiest things to find when we’re home. Also, when you leave home, Ubi is still there waiting for you and monitoring the environment.

Ubi comes packed with sensors that can be used for home automation and monitoring. It also has lights that can indicate different information.

There are a few ways you can upload your contacts onto the Ubi: Sync your Ubi with your Google account. Load your Skype contacts onto the Ubi. Manually add contacts by voice or through terminal access using your iPhone/Android device or a desktop/laptop.

Yes, each Ubi comes with a one year warranty. We want to make sure whoever gets an Ubi is thrilled with it!

Ubi is an open source computer and developers can hack and explore it to their liking. It is packed with easily accessible sensors and lights. Onboard are Wifi, USB, bluetooth, and RF transceivers. And, we speak the language of open source developers, e.g. Android. You can even make your own peripherals for the Ubi or link it to other devices (we envision it connecting to Pebble, Twine, Sensordrone, and other Kickstarter projects).

We will be releasing an SDK with hooks into all the functionalities of the Ubi. More detail will be forthcoming on the SDK as our project progresses.

The current version of the Ubi does not contain a battery. We are exploring the possibility of adding a battery for back up power in the event of a power outage.

Just in case, the Ubi has a button to override certain functions: You can mute or unmute the Ubi and turn off the microphone by pressing the button once (this can be done through voice as well). The Ubi can be powered off by holding down on the button for three seconds.

Just like restarting your computer or phone, the Ubi will keep all your applications and files saved and will load them after it restarts. The restart time is approximately two minutes.

You can have as many Ubis as the number of wall outlets in your home or office. The Ubi is designed to sync with other Ubis. You can treat them all as one entity.

Ubi’s light can be programmed to have practically an infinite number of combinations of colors and patterns. It can be used as a more abstract means of communication or to relay information. Some possible applications:

Flashing orange if your baby’s room’s temperature or humidity level is over a certain threshold. Flashing yellow to remind an elderly woman to take her yellow pills. Glowing red whenever Facebook stock falls below a certain threshold. Fading from green to blue to show pleasant weather in the forecast. Blinking blue if you have a new email in your inbox.

If you’re interested in developing apps specifically for the Ubi, we’d love to hear from you. You can reach us at info@theubi.com.

Simple answer – to meet the expectations we’ve set to deliver the Ubi on time. There are a limited number of Ubis we can manufacture within the estimated timeline considering our production resources.

Very simple... just plug it in. OK, a little more... There are three ways of connecting the Ubi to the Internet:

Voice: For almost all Wifi routers, you just have to power up the Ubi and say “Ubi, setup wifi”. The Ubi will ask you to select from a list of networks and then prompt you to spell the WEP code.

Smartphone: By downloading the Ubi app for iPhone or Android, you can setup the Ubi by connecting from your phone to the newly plugged-in Ubi through Bluetooth. You can then select from a list of available networks and enter any necessary passwords.

Old School Computer: From a PC or laptop, anyone can download a small file that will allow for setup and configuration of the Ubi.

All you need is wireless Internet access and an available power outlet. You can access a lot of other hardware with the Ubi through Wifi, Bluetooth, USB, and RF. You can also remotely access Ubi using your phone, tablet, PC, or laptop from anywhere in the world.

Our goal is to make Ubi affordable so that everyone can have at least one. In short... no, the Ubi can’t connect directly to your TV. We’re exploring future versions that may have this feature.

There are a few different ways:

By voice: “Ubi, what is the temperature in my child’s bedroom?” “Ubi, are the lights off in my basement?” Using your smartphone or tablet through the Ubi app.

Online: the sensor data is logged and accessible through an Internet portal from anywhere in the world.

By text/email: you can program the Ubi to text/email you based on triggers from sensor data.

You can use the USB port to connect to: mass storage devices, cameras, additional sensors, home automation products, and whatever your imagination comes up with, you sneaky developer! You can also use the USB port for powering your phone or tablet or other devices.

In normal mode, the Ubi should draw less than 3 W. When fully functioning and with the LEDs at full power, the level increases up to 10 W. We are investigating ways we can minimize power consumption while still streaming data from the Ubi.

The Ubi comes with 4 GB local storage. This is expandable through an internal microSD slot that can be accessed inside the Ubi.

Adding a memory stick / storage device will allow for files to be remotely accessible, so you upload or download files to whatever memory device is connected to the Ubi. This will be accessible initially through the iPhone / Android portal rather than through voice.

Skype and Google Talk calls will be announced with the caller ID / contact name read. You can then say, “Ubi, answer” or “Ubi, reject” to accept the call or reject it.

We’re working to ensure that Ubis will not interfere with each other. There will be some minimum distance that the Ubis will need to be kept from each other but we’re still experimenting with optimal placement.

We are working to provide a selection of voices for reading back the Ubi voices. Sadly, Samuel L. Jackson has turned us down despite our offers of unlimited free Ubis.

Yes. Sometimes you just need to see what’s happening inside. We’re working on access via wifi.

The Ubi will always attempt to read back the shortest (one sentence) response in plain English. However, in some instances, there may be multiple results for a search. In this case, the Ubi will read back clips of the first few search results. Telling the Ubi to “Read more” will read more of the text from that search result.

Once you need to look at a longer list of results, different modes of computing become better suited. For short answers, however, this method of condensing the results will provide at least some useful information when search results cannot be read off as a single sentence.

We believe some people may want to use the Ubi to stream music. While we’re endeavoring to provide create sound quality, we know there are much bigger players in the field. We hope to provide stereo sound through this jack and it will bypass and disable the Ubis internal speakers.

Yes! You can unplug the Ubi and plug it in elsewhere. You’ll be able to rename the location of the Ubi by either using the Ubi app or through the Ubi portal.

We’re working to preserve as much functionality as possible of the Ubi in the event that there’s an Internet outage. The Ubi, though, is an Internet device and requires a strong, healthy Internet connection. With a bad connection, voice quality during calls will suffer and there may be increased latency in getting the Ubi to respond or return search results.
We are working to allow for multiple Ubis to be able to work as their own network independent of an Internet connection. More on that to come...

We feel home heating and cooling has a long way to go and that our homes, especially in this respect, are really dumb. We’re loving devices like Nest that are making it possible to control heating and cooling in the home through the Internet.
The issue with most thermostats is that you have a single input - the temperature - usually found in the middle of the house or apartment. Since this is the only information used to actuate a furnace or air conditioning system, homes waste tons of energy and people end up really uncomfortable.
With more data, homes can better adapt. Having an Ubi in every room can allow for a much more detailed picture of heat flow and energy loss in the home, as you can tell how the temperature and humidity changes over time in different locations.

This information can then be used to turn a furnace on or off. With multiple Ubis, you can use the average temperature throughout the home as the feedback to a thermostat, rather than the temperature at one spot. Likewise, you can adjust the set point of the furnace or air conditioning depending on the humidity of the home.