$296
pledged of $500pledged of $500 goal
14
backers
Funding Unsuccessful
The project's funding goal was not reached on Fri, July 19 2019 3:29 AM UTC +00:00
$296
pledged of $500pledged of $500 goal
14
backers
Funding Unsuccessful
The project's funding goal was not reached on Fri, July 19 2019 3:29 AM UTC +00:00

About

I believe that the things people ask for are what should be made, as do a number of other makers.  The things people were clamoring for were tribal sculpts, fat-headed goblins, and centaurs among other things.  As such I decided to go out and make a tribal village of goblins in the requested style, large heads spindly bodies, but the heads aren't as bulbous as is typically being made.  Then I decided I wanted there to be some kind of conflict, an intrinsic story.  So I came up with the idea of the tribe using the forest, and the forest not being happy about it.

Most of the included files as printed on an Ender 3 or Flashforge Finder.
Most of the included files as printed on an Ender 3 or Flashforge Finder.

Added to my $25 tier:

Huge sized leaf dragon, wings are split to make it easier to print and to allow it to print on smaller resin printers.
Huge sized leaf dragon, wings are split to make it easier to print and to allow it to print on smaller resin printers.
Medium scaled leaf dragon, sized for a medium base and thickened for appropriate scaling.
Medium scaled leaf dragon, sized for a medium base and thickened for appropriate scaling.
 project video thumbnail
Replay with sound
Play with
sound

As with my last kickstarter, I will continue to make files during the entire 30 day duration of the kickstarter.  Unlike the last one, I will be maintaining a stretch goals listing.  All additional files and stretch goals (once met) will be available to the $25 tier.

Many of the more human forms from the files utilize base geometry created by Valandar

 ****ALL REWARDS ARE IN THE FORM OF STL FILES, NO PHYSICAL PRODUCTS - Except for the physical final tier****


Below are photos of the majority of the contents included in the files, there are quite a few variants not included, but there is more or less one of everything here.  The majority of what is pictured was done on an ender 3 at .08 layer height.  Some larger items are done at .16 layer height on either the ender 3 or the flashforge finder.  If you look closely I have a good bit of wobble on my ender resulting in some questionable quality parts and sever lines on a few. Very little clean up was done on the miniatures except removing tree supports, and a light dusting of gray primer as the can ran out before completion.

One of the worst victims of wobble.
One of the worst victims of wobble.
The tower is printed supportless as 3 pieces and assembled, the assembly nubs are small enough that they can be cut away if need be.
The tower is printed supportless as 3 pieces and assembled, the assembly nubs are small enough that they can be cut away if need be.

Disclaimer: I am new to resin printing and awful at cleaning up supports and angling my prints correctly.

Risks and challenges

Most of the risks are minimal, the base files are all complete, and have been test printed on one of my fdm printers. I have not done resin printing with any of the files, though I will be testing some of the finer ones to see how they turn out.

Learn about accountability on Kickstarter

Questions about this project? Check out the FAQ

Support

  1. Select this reward

    Pledge $1 or more About $1.00

    Emotional Support!

    For this you will forever have my gratitude, you will also be granted access to a goblin riding a pig.

    Includes:
    • Goblin on a Pig!
    Less
    Estimated delivery
    0 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge $15 or more About $15

    Let the Battle Begin!

    This tier includes the lower tower tier.
    For this tier you get all of the base STL files from this kickstarter.

    Includes:
    • 8 Goblin styles, along with their tribal variant (27 files total)
    • The goblin camp pieces - Huts, walls, braziers, pigs, watchtower
    • 8 Forest defenders-Centaurs,Treants,Satyrs,Owlbear, and Unicorn
    • (De)forest pieces - Log piles, stumps, and trees
    Less
    Estimated delivery
    3 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Select this reward

    Pledge $25 or more About $25

    I want more!

    This tier receives both previous tiers.
    This tier will also receive all unlocked stretch goals.

    Includes:
    • Previous Tiers
    • Any additional files made in the next 30 days
    • Any unlocked Stretch Goals
    Less
    Estimated delivery
    10 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  4. Select this reward

    Pledge $60 or more About $60

    Tangible Miniatures

    This tier will include the previous tiers (stl files will be included as they can still be used on library printers or if future purchases are made).

    This is the only tier for physical product. At the conclusion you will choose 15 miniatures/terrain pieces of the full array. Anything medium sized (or reasonably sized large creatures - centaur/unicorn) will be printed in Resin. Larger pieces and terrain pieces will be printed in PLA.

    Includes:
    • 15 physical miniatures, chosen once everything is released.
    • Previous Tiers - STL files only
    Less
    Estimated delivery
    Ships to Only United States
    Limited 0 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.

Funding period

- (30 days)