$199
pledged of $1,000pledged of $1,000 goal
6
backers
16days to go

All or nothing. This project will only be funded if it reaches its goal by Tue, April 9 2019 7:20 PM UTC +00:00.

Paul SteinBy Paul Stein
First created
Paul SteinBy Paul Stein
First created
$199
pledged of $1,000pledged of $1,000 goal
6
backers
16days to go

All or nothing. This project will only be funded if it reaches its goal by Tue, April 9 2019 7:20 PM UTC +00:00.

About

 I made a half of a fort out of wood for a table top game years ago and many of the other players wanted one as well. Give the time it took to make just a single section I told the crew that it was not possible. But now here we are years later. 

The Picture is of a Quarter-a-Fort Level


      Each wall section is unpainted resin and requires assembly. Parts included are the wall, walkway and two uprights.  When assembled this is approximately 4 inches (100mm) long, 1.25 inches (30mm) wide, and 4 inches (100 mm) tall. 

Sally Port Door Wall Section is 4 inches (100mm) long, 1.25 inches (30mm) wide, and 4 inches (100 mm) tall.

Long Wall Section is 5 inches (125mm) long, 1.25 inches (30mm) wide, and 4 inches (100 mm) tall.    

Main Gate Section is  5 inches (125mm) long, 2.25 inches (60mm) wide, and 6 inches (150 mm) tall.     

Corner Section is 2 inches (50mm) long, 2 inches (50 mm) wide, and 4 inches (100 mm) tall. 

Outside Corner Section is 3.25 inches (80mm) long, 3.25 inches (80 mm) wide, and 4 inches (100 mm) tall. 

Risks and challenges

Right now I only have one mold for each part. So it takes a while to make a whole set. If all the goals are met I will have the funding to make more molds and get the items out faster.

Learn about accountability on Kickstarter

Questions about this project? Check out the FAQ

Support

  1. Make a pledge without a reward

    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge $4 or more About $4

    Basic Walk Way

    This is a single unpainted resin. This item is approximately 4 inches (100mm) long, 0.75 inches (20mm) wide, and 0.25 inches (6.5 mm) tall.

    Less
    Estimated delivery
    Ships to Only United States
    0 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Select this reward

    Pledge $5 or more About $5

    4 inches Wall

    This is a 1 unpainted resin wall section. Just the wall, and that is it. This is approximately 4 inches (100mm) long, 0.25 inches (5mm) wide, and 4 inches (100 mm) tall.

    Less
    Estimated delivery
    Ships to Only United States
    0 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  4. Select this reward

    Pledge $8 or more About $8

    Basic Corner Section

    This is a single unpainted resin and requires assembly Corner wall section. With the left and right wall, walkway and two uprights. When assembled the Corner Section is 2 inches (50mm) long, 2 inches (50 mm) wide, and 4 inches (100 mm) tall.

    Less
    Estimated delivery
    Ships to Only United States
    0 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  5. Select this reward

    Pledge $10 or more About $10

    Basic Wall Section

    This is a single unpainted resin wall section. With the wall, walkway and two uprights. When assembled this is approximately 4 inches (100mm) long, 1.25 inches (30mm) wide, and 4 inches (100 mm) tall.

    Less
    Estimated delivery
    Ships to Only United States
    0 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  6. Select this reward

    Pledge $15 or more About $15

    Outside Corner Section

    This is a single unpainted resin and requires assembly Corner wall section. With the left and right wall, walkway and three uprights. When assembled the Outside Corner Section is 3.25 inches (80mm) long, 3.25 inches (80 mm) wide, and 4 inches (100 mm) tall.

    Less
    Estimated delivery
    Ships to Only United States
    0 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  7. Select this reward

    Pledge $20 or more About $20

    24 inches of Wall

    This is a 6 unpainted resin wall section. Just the wall, and that is it. This is approximately 24 inches (610mm) long, 0.25 inches (5mm) wide, and 4 inches (100 mm) tall.

    Less
    Estimated delivery
    Ships to Only United States
    0 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  8. Select this reward

    Pledge $25 or more About $25

    Main Gate Section

    This is a single unpainted resin gate section. With the wall, walkway and two uprights. When assembled this is approximately the Main Gate Section is 5 inches (125mm) long, 2.25 inches (60mm) wide, and 6 inches (150 mm) tall.

    Less
    Estimated delivery
    Ships to Only United States
    Limited (49 left of 50) 1 backer
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  9. Select this reward

    Pledge $30 or more About $30

    Quater-a-Fort

    Includes 3 wall sections and One Sally port door Wall section. When Fully assembled Quarter-a-Fort is approximately 16 inches (405mm) long, 1.25 inches (30mm) wide, and 4 inches (100 mm) tall.

    Less
    Estimated delivery
    Ships to Only United States
    1 backer
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  10. Select this reward

    Pledge $50 or more About $50

    48 inches of Basic Wall

    This is a 12 unpainted resin wall section. Just the wall, and that is it. This is approximately 48 inches (1220mm) long, 0.25 inches (5mm) wide, and 4 inches (100 mm) tall.

    Less
    Estimated delivery
    Ships to Only United States
    0 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  11. Select this reward

    Pledge $60 or more About $60

    Half-a-Fort

    Includes 8 wall sections and One Sally port door Wall section. Plus, two Corners with walkways. When Fully assembled Half-a-Fort is approximately 21 inches (535 mm) long, 10 inches (250mm) wide, and 4 inches (100 mm) tall.

    Less
    Estimated delivery
    Ships to Only United States
    0 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  12. Select this reward

    Pledge $125 or more About $125

    Full Fort

    Includes 16 wall sections, One Long wall section, and One Main Gate. Plus, four Corners with walkways. When Fully assembled Full Fort is approximately 25 inches (545 mm) long, 25 inches (545 mm) wide, and 4 inches (100 mm) to 6 (150 mm) tall.

    Less
    Estimated delivery
    Ships to Only United States
    Limited (24 left of 25) 1 backer
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  13. Select this reward

    Pledge $150 or more About $150

    Delux Full Fort

    Includes 17 wall sections, One Long wall section, and One Main Gate. Plus, four Corners with walkways.

    One Sally Port Wall section. Two Outside Corners with walkways. May different ways to set up this set.

    Basic Wall Section assembled this is approximately 4 inches (100mm) long, 1.25 inches (30mm) wide, and 4 inches (100 mm) tall.

    Sally Port Door Wall Section is 4 inches (100mm) long, 1.25 inches (30mm) wide, and 4 inches (100 mm) tall.

    Long Wall Section is 5 inches (125mm) long, 1.25 inches (30mm) wide, and 4 inches (100 mm) tall.

    When assembled this is approximately the Main Gate Section is 5 inches (125mm) long, 2.25 inches (60mm) wide, and 6 inches (150 mm) tall.

    Corner Section is 2 inches (50mm) long, 2 inches (50 mm) wide, and 4 inches (100 mm) tall.

    Outside Corner Section is 3.25 inches (80mm) long, 3.25 inches (80 mm) wide, and 4 inches (100 mm) tall.

    Less
    Estimated delivery
    Ships to Only United States
    Limited (15 left of 15) 0 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  14. Select this reward

    Pledge $200 or more About $200

    Painted Half-a-Fort

    Includes 8 wall sections and One Sally port door Wall section. Plus, two Corners with walkways.

    All Sections are painted and based.

    When Fully assembled Half-a-Fort is approximately 21 inches (535 mm) long, 10 inches (250mm) wide, and 4 inches (100 mm) tall.

    Less
    Estimated delivery
    Ships to Only United States
    Limited (4 left of 4) 0 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  15. Select this reward

    Pledge $400 or more About $400

    Painted Full Fort

    Includes 16 wall sections, One Long wall section, and One Main Gate. Plus, four Corners with walkways.

    All Sections are painted and based.

    When Fully assembled Full Fort is approximately 25 inches (545 mm) long, 25 inches (545 mm) wide, and 4 inches (100 mm) to 6 (150 mm) tall.

    Less
    Estimated delivery
    Ships to Only United States
    Limited (2 left of 2) 0 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  16. Select this reward

    Pledge $500 or more About $500

    Painted Delux Full Fort

    Includes 17 wall sections, One Long wall section, and One Main Gate. Plus, four Corners with walkways.

    One Sally Port Wall section. Two Outside Corners with walkways.

    All Sections are painted and based.

    May different ways to set up this set.

    Basic Wall Section assembled this is approximately 4 inches (100mm) long, 1.25 inches (30mm) wide, and 4 inches (100 mm) tall.

    Sally Port Door Wall Section is 4 inches (100mm) long, 1.25 inches (30mm) wide, and 4 inches (100 mm) tall.

    Long Wall Section is 5 inches (125mm) long, 1.25 inches (30mm) wide, and 4 inches (100 mm) tall.

    When assembled this is approximately the Main Gate Section is 5 inches (125mm) long, 2.25 inches (60mm) wide, and 6 inches (150 mm) tall.

    Corner Section is 2 inches (50mm) long, 2 inches (50 mm) wide, and 4 inches (100 mm) tall.

    Outside Corner Section is 3.25 inches (80mm) long, 3.25 inches (80 mm) wide, and 4 inches (100 mm) tall.

    Less
    Estimated delivery
    Ships to Only United States
    Limited (1 left of 1) 0 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.