Holy World themed resin 28mm scale cast terrain (Canceled)
Holy World themed resin 28mm scale cast terrain (Canceled)
Finely detailed resin cast 28mm scale terrain pieces themed after an Imperial holy shrine world to be used in your tabletop wargames.
Finely detailed resin cast 28mm scale terrain pieces themed after an Imperial holy shrine world to be used in your tabletop wargames. Read more
Imagine a planet at war. The conflict has dragged through the years and has been as bloody as it was cruel. The soldiers deployed on the battlefield are lucky though. They are assigned to defend hollowed grounds consisting of a Chapel and a glorious Arch of Triumph! Though the once mighty buildings lay in ruins, faith in their protective powers is unyielding. The commanders have been very clear:
The sanctuary cannot fall.
The warriors fielded on the sanctified grounds can count on sturdy barricades and barriers to protect them, dragon teeth tank traps and gun emplacements to slow down their enemies. They also have the mighty Ironstorm Sentry Gun as well as the Steel Rain Missile Battery to add to their fire power. Finally, the brave soldiers will be able to use the Imperial communications Relay to direct their assaults and to call much needed reinforcements.
What is the project about?
The 28mm scale pieces offered in this first Kickstarter represent the last line of defense to protect the Ruined Chapel and the glorious Arch of Triumph.
This project is also a way to introduce my new range of products. All the products made available in this project will be offered at retail price on my website (which is currently still Under construction) after the Kickstarter. Provided that this project is a success, there will be other lines of products launched, to be introduced via Kickstarter first – in the works are plans for Pathway buildings as well as Hive City modular parts.
The main reason is this: immediate funding. If this project is successful, I will be able to buy molding and casting material needed for the larger pieces. Indeed, what is the most expensive is the molding material and I will need a whole lot of it! So, your pledges, which will go towards making the larger pieces, will get you a rebate on the planned retail price.
You can add other packages to your pledge easily.
Click on ‘Manage your pledge’. If you have not pledged yet, click ‘Support this Project’
Start with the priciest package you want. Add the shipping fee. Then add the cost of the other packages you wanted to pledge on plus half of their shipping fee. I will contact you when the project is funded to determine what rewards you want.
For example : you are in the United States and wish to pledge on the Absolved Sergent but you also want to have the Craters package. The total cost would be calculated like this :
$175.00 +$10.00 for the Absolved Sergent and shipping
$45.00 + $2,50 for the Crater Package
You can also add individual pieces :
1. Same as above but select what you want to get as a reward on top of your original pledge.
2. The shipping fee is included in the price of the individual pieces.
3. I will contact you when the project is funded to determine what rewards you want.
Here is the list of the products available as add-ons :
Barricades and Debris
Dragon's Teeth X6 $8,00
Jersey Barrier $3,00
Aquila Jersey Barriers (Plain and Aquila) $3,00
Skull Barrier Base $3,00
Skull Barrier Complete $5,00
Each individual Barricade $5,00
Broken Statue $3,00
Broken Bell $11,00
Debris Crater $4,00
Triple Crater $8,00
Small Crater $3,00
Crater Dragon Teeth 1 $10,00
Crater Dragon Teeth 2 $8,00
Imperial Communications Relay $45,00
Absolution Missile Battery $10,00
Gothic Base $32,00
Iron Storm Sentry Gun $15,00
Chapel Entrance 1 $10,00
Chapel Entrance 2 $5,00
Arched Window Wall (2 Parts) $15,00
Ruined Window with Crater $7,00
Ruined Window 1 $5,00
Ruined Window 2 $ 8,50
Ruined Choir $23,00
Twisted Column 1 $4,00
Twisted Column 2 $4,00
Broken Column $4,00
Bench Column 1 $6,00
Bench Column 2 $6,00
Bench Column 3 $6,00
Choir Altar $15,00
Small Altar $5,00
Fallen Aquila $5,00
The project so far
All the pieces, except for Arch of Triumph and the Communication Relay, are ready to be molded and then cast in resin. At the time of this writing, the Arch is missing sculptures and bas-reliefs. As the campaign progresses, I will be including sketches and project updates. I plan on making sure it is glorious! The Communication Relay needs a slight bit of work, but is almost finished (only has a few details to go!).
The rest of the pieces are finished and ready.
Close-up of the all pieces with their dimensions are at the bottom of this section.
Please note that all the pieces will be delivered unpainted.
The Packages you have access to
Here are the different packages available. I tried to make them as varied and interesting as possible. Please note that the pieces are subject to change, depending on details to be added or corrected to ensure the best cast quality once molded.
The Pathway Photon Shield
Another product is available!
The Pathway Bunker
A brand new product made available now.
The Repentent Soldier
The Absolved Sergent
The Virtuous Commander
The Glorified General
The Dagger of the Saint
The Sword of the Saint
Cloak of the Saint
Shield of the Saint
The Proud Ruin
The Sanctified Chapel
The Exalted Sanctuary
The Arch of Triumph
Until the end of the Kickstarter Campaign: I will be working on the Arch and the Communications Relay, making them more detailed and ready to be cast. If details need to be added or perfected on the existing pieces, it will be done during this time.
Near the end or right after the campaign: Provided all goes well and the project is funded or very near the goal of 7500 CA$, the molding and casting materials are purchased and the molding starts.
Within 2-3 weeks following the campaign: The molds are all done and production will begin.
Once production has started: I will keep everyone posted on shipping times, any delays or problems which might occur, though I will ensure they are as limited as possible. When a pledge is ready, it is shipped immediately and you will be notified by email.
My past experience shipping terrain pieces via Canada Post has been great, and so I will be using them. I want your shipping fees to be as low as possible, and thus will be offering Surface shipping. Again, my past experience with it has been quite positive. Delivery should take between 4-12 weeks depending on the country, but would not include Tracking.
If you wish to get your pledge reward faster, or would like to have your parcel tracked, please go ahead and email me so we can arrange it. There are faster shipping options available as well, but as their rate is higher, these are to be arranged via e-mail, so that the extra expense is properly communicated.
The straight barricade pieces are on average 4 1/8'' long X 1 5/8'' large X 1 1/4'' high approximately.
The corner barricades are 4 5/8'' long X 2 1/2'' large X1 3/8'' high approximately.
Cover and Obstacles
Weapon systems and Equipement
The Imperial Communications Relay
Chapel Columns and Furnitures
Thank you for your interest, it is appreciated!
Risks and challenges
Since I have been designing the models for quite some time and am now working on them full time, the chance of me not shipping when the project is funded is zero.
I have been molding pieces with silicone for quite some time now and have gained experience doing so. Producing those molds is not a problem at all.
The casts I produced in the past have very few bubbles and gaps. I plan on sending only the best cast items. I am confident you will love the products as much as I loved designing them.
My workshop is equipped with all the right tools. Since I was a machinist in the past, I am organized and can produce pieces quickly and efficiently.
Shipping is already figured out. I picked the boxes that you will receive, everything will be wrapped tightly so the damage to the products, while unfortunately not impossible during transport, will be minimized.
As far as logistics go, when a set is ready, it will be shipped by Canada Post.
Should the amount of pledges go out of hand, no problem. I will hire a contract worker to help me out with the molding and casting to make sure you get your products in a timely fashion. I already know people that can help me out should this awesome problem arise.
It is my first time on Kickstarter but I am backed and helped by people that have been navigating in the KS world for quite some time now. I feel confident that with their help, I will be able to deliver.
If you have further questions, please do not hesitate to ask me.Learn about accountability on Kickstarter
- (30 days)