Share this project

Done

Share this project

Done
eLab Peers eBOT ARM project video thumbnail
Replay with sound
Play with
sound
$4,964 pledged of $5,000 goal
backers

All or nothing. This project will only be funded if it reaches its goal by .

By eLab Peers
$4,964 pledged of $5,000 goal
backers

All or nothing. This project will only be funded if it reaches its goal by .

About this project

We want to create a robot arm which is low-cost, easy to assemble and suitable for both newbies and veteran. It is also a great tool for learning robotics, electronics and programming in interesting way. After years of design, testing and improvement, we created eBOT ARM and start fund-raising in Kickstarter NOW.  

Specification

eBOT ARM 

 

  • 4 degree-of-freedom robotic arm
  • 3mm acrylic body part
  • 4 servos 
  • 1 claw 
  • 1 set of screws and nuts
  • Width when claw opens: 110mm 
  • 6.7” x 4” x 7.5”
  •  4 degree-of-freedom robotic arm 

Bluetooth Module

 

  • Mainstream CSR chip 
  • Bluetooth v2.0 Protocol 
  • Wave band : 2.4GHz-2.8GHz, ISM Band 
  • 6dBm Power Class 
  • -85dBm Reception Sensitivity 
  • Operating Voltage : 3.3 
  • Operating Current: Paring 35mA, Connected 8mA 
  • Arduino/Einsboard Compatible 
  • 1.1" x 0.5" x 0.3" 

8-Servo Controller 

 

  • 32-bit CPU 
  • Operating Voltage: 7.8V 
  • Simultaneously control 8-Channel 
  • USB, Serial (TTL, USART, bluetooth) compatible 
  • Arduino/Einsboard compatible 
  • Warning buzzer 
  • Output: PWM 1us Accuracy 
  • Accuracy: 0.45° 
  • Baud rate: 9600 
  • Memory: 512KB Flash 
  • Power switch with JST connector 
  • 2.6” x ” x 1.7” x 1.5"

Knob Controller

 

  • 6 knobs for servo control 
  • Operating voltage: 5V 
  • Circle pulses: 20 
  • Arduino/Einsboard Compatible 
  • Dupont wires included 
  • 2.8” x ” x 1.75” x 1.5”

eLab Peers Einsboard

 

  • ATmega328 microcontroller with Optiboot Bootloader
  • USB Programming Facilitated by FTDI FT231X
  • Input voltage 18 - 7V 
  • Reverse polarity protection
  • More reliable reset 
  • LEDs on the side for better visibility with Shield 
  • Supports up to 14 digital input/output pins 
  • Supports up to 6 PWM outputs 
  • Supports up to 6 analog inputs 
  • 16 MHz ceramic resonator 
  • 32KB Flash Memory 
  • 2KB SRAM 
  • 1KB EEPROM 
  • Powered by USB option 
  • Power jack 
  • ISP header 
  • Reset button
  • Supports USB, UART TTL, I2C, and SPI 
  • UNO R3 Shield compatible 
  • USB cable included 
  • 3" x 2.2" x 0.5"

*the battery is excluded from our package 

Rewards

 Timeline

 

Risks and challenges

Over the last few years, we did testing many times to ensure that it is in good quality. We also worked with our partners. All key components like body parts, cables and boards were tailor-made to make sure they meet our standard.

There are always things that can go wrong, especially when you are running a large production. We may face several risks including production delays, shipping delays, lack of funding for mass production, missing parts, etc. To minimize these risks, we liaise with our design team, marketing team, manufacturer and logistic team and do our best to bring all backs a nice experience.

We will give regular update on Kickstarter and let all backers know our progress.

Learn about accountability on Kickstarter

Questions about this project? Check out the FAQ

Support this project

  1. Make a pledge without a reward

    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge $35 or more About $35

    Early Bird of Basic Package

    Includes:
    • eLab Peers eBOT ARM
    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited (98 left of 100) 2 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Select this reward

    Pledge $40 or more About $40

    Early Bird of Deluxe Package

    Includes:
    • eLab Peers eBOT ARM
    • Bluetooth Module
    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited (98 left of 100) 2 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  4. Select this reward

    Pledge $45 or more About $45

    Basic Package

    Includes:
    • eLab Peers eBOT ARM
    Less
    Estimated delivery
    Ships to Anywhere in the world
    0 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  5. Select this reward

    Pledge $50 or more About $50

    Early Bird of Premium Package

    Includes:
    • eLab Peers eBOT ARM
    • Bluetooth Module
    • 8-servo controller
    • Knob controller
    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited (97 left of 100) 3 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  6. Select this reward

    Pledge $50 or more About $50

    Deluxe Package

    Includes:
    • eLab Peers eBOT ARM
    • Bluetooth Module
    Less
    Estimated delivery
    Ships to Anywhere in the world
    0 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  7. Select this reward

    Pledge $55 or more About $55

    Early Bird of Elite Package

    Includes:
    • eLab Peers eBOT ARM
    • Bluetooth Module
    • 8-servo controller
    • Knob controller
    • eLab Peers Einsboard
    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited (51 left of 100) 49 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  8. Select this reward

    Pledge $60 or more About $60

    Premium Package

    Includes:
    • eLab Peers eBOT ARM
    • Bluetooth Module
    • 8-servo controller
    • Knob controller
    Less
    Estimated delivery
    Ships to Anywhere in the world
    1 backer
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  9. Select this reward

    Pledge $65 or more About $65

    Elite Package

    Includes:
    • eLab Peers eBOT ARM
    • Bluetooth Module
    • 8-servo controller
    • Knob controller
    • eLab Peers Einsboard
    Less
    Estimated delivery
    Ships to Anywhere in the world
    10 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  10. Select this reward

    Pledge $270 or more About $270

    Store Package

    Includes:
    • eLab Peers eBOT ARM
    • Bluetooth Module
    • 8-servo controller
    • Knob controller
    • eLab Peers Einsboard
    Less
    Estimated delivery
    Ships to Anywhere in the world
    0 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  11. Select this reward

    Pledge $520 or more About $520

    Distribution Package

    Includes:
    • 10× eLab Peers eBOT ARM
    • 10× Bluetooth Module
    • 10× 8-servo controller
    • 10× Knob controller
    • 10× eLab Peers Einsboard
    Less
    Estimated delivery
    Ships to Anywhere in the world
    0 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.