Funded! This project was successfully funded on March 6, 2013.

    1. Hunt.small

      Creator Iain on March 24

      Never received anything. Boo.

    2. Missing_small

      Creator Alex Robin on January 28

      Updates would be pretty good.

    3. Hunt.small

      Creator Iain on January 9

      Would love an update! Thanks.

    4. Missing_small

      Creator Alan Zieba on January 8

      Nothing yet, $300 pledge. I understand the Time it takes to make and ship these. Hopefully ill see it soon

    5. Fb_profile_picture.small

      Creator TeslaTronix on November 17

      Hi there. We are preparing more shipments of completes and pre wounds. Unfortunately our international shipment costs over 4 pounds have more than doubled since the start of the project, and this is contributing to the delay. Slowly but surely our backers will receive their pledged items.

    6. Ahaxzresized.small

      Creator Ahaxz on November 17

      Have not recieved annything so far, 200$ international pledge
      De Gendt Olivier

    7. Rwt6.small

      Creator Roger W Turner on October 24

      "A fully tested and complete Tesla Tronix 2500 turn Tesla coil, tuning wand and a DC power supply." (Also, 2 off 7.4v LiPo batteries and the DVD.)

      Delivered to me (UK) 10 minutes ago.

      THAT LOOKS DAMN IMPRESSIVE MAN. Safely packed, beautifully made.

      Did I say it looks impressive? And beautifully made?

    8. Fb_profile_picture.small

      Creator TeslaTronix on October 11, 2013

      Time for an update, I want to get a new video update out hopefully soon, and eventually back to posting regular video updates again.

      Truth be told I was without a residence for several weeks while we were searching, and many houses/apartments had fallen through. All my personal items/furniture and most Tesla inventory were intermingled in storage for this time. We finally managed to settle into a much larger space than what we were living in, within the same price range we were previously living in.
      Believe me I want to get these rewards out ASAP, I had never dreamed It would be October and I would still be shipping Kickstarter items.

    9. Rwt6.small

      Creator Roger W Turner on October 10, 2013

      Any news on the remaining few rewards?

    10. Fb_profile_picture.small

      Creator TeslaTronix on August 27, 2013

      There are still some rewards at have not shipped yet. My lease has expired for my current residence and things have been hectic hes past several weeks. Rewards are still slowly shipping.

    11. Missing_small

      Creator Kim Magloire on August 27, 2013

      Hi, I have not received my reward and I ordered the fully assembled Tesla Tronix 1500 turn tesla coil.

    12. Rwt6.small

      Creator Roger W Turner on August 26, 2013

      Has my reward been despatched yet?

    13. Fb_profile_picture.small

      Creator TeslaTronix on August 10, 2013

      We're down to the last 25 rewards or so. Almost there!

    14. Fb_profile_picture.small

      Creator Ethan Harris on August 10, 2013

      Hmm. Updates? I tried waiting a few weeks before asking again.

    15. Fb_profile_picture.small

      Creator TeslaTronix on July 25, 2013

      At this point there are only some pre wound kits left. All completes that have not shipped yet will ship with a T-shirt, and all pre wound kits will be shipping with spheres.

    16. Fb_profile_picture.small

      Creator Ethan Harris on July 25, 2013

      Any idea when you will send my kit? It seems like I gave you a lot of money and I haven't heard anything.

    17. Fb_profile_picture.small

      Creator TeslaTronix on June 30, 2013

      Chris, your order shipped on the 16th. You should receive it some time this week. It has not bounced back to the PO box.

      We are still shipping completes, and the final mixed assortment of lower tier kits will ship Monday 1st.

    18. Missing_small

      Creator Chris Lin on June 30, 2013

      hey TT,

      i've read somewhere a while that there are afew sets yet to be shipped, but i have yet to receive mine~ not to be too rushing but just curios if you indeed have sent all the shipment and could mine have been lost or something

      i've pladge $75 for the international kit~

      pls advice, thanks!

    19. Fb_profile_picture.small

      Creator TeslaTronix on June 25, 2013

      Do not let the wire overlap, period. This is key. A multi layer coil will not function.

    20. Fb_profile_picture.small

      Creator Ryan O'Don on June 25, 2013

      So I'm new at the whole tesla coil scene and I don't know much about them at the moment. I ordered a kit just because I love the idea of wireless power and thought this would be a good way for me to experiment and learn what goes into making a tesla coil and how they work. Can someone explain whether or not for the L2 you can have a multi layer coil and why or why not?

    21. Fb_profile_picture.small

      Creator Jacobi on June 11, 2013

      I NEED LIGHT!!! anxious in NC. Yes patiently waiting on the Second round of UPGRADED domestic kit. : )

    22. Shirt_918thefan_forsciencetwo_lrg.small

      Creator Anomaly on June 7, 2013

      I would be willing to pre-order a 6" sphere.

    23. Fb_profile_picture.small

      Creator TeslaTronix on June 7, 2013

      I would like to say within a week or so, we have a new shipment of spheres on the way in, and we have to tack the nuts down. If you wish I can start pre-orders on them.

    24. Shirt_918thefan_forsciencetwo_lrg.small

      Creator Anomaly on June 7, 2013

      Sounds good. Any idea when the spheres will become available?

    25. Fb_profile_picture.small

      Creator TeslaTronix on June 7, 2013

      Though I might have to take a peek at mcmasters copper floats....

    26. Fb_profile_picture.small

      Creator TeslaTronix on June 7, 2013

      Those are decent subsitutes, but mcmaster prices are way too high, and if you look those steel spheres on king are 5 pounds. Our prices for our spheres will fall somewhere between those two, and they are hollow stainless steel, with an 1/4 20 threaded nut welded.

    27. Shirt_918thefan_forsciencetwo_lrg.small

      Creator Anomaly on June 7, 2013

      Well, I'm not sure how spherical and smooth they would end up being, but I was looking at metal floats as a (somewhat) cheap way of getting hollow metal spheres. http://www.mcmaster.com/#float-valve-spheres/=n32v3l has a pretty diverse listing. This site: http://www.kingmetals.com/Catalog/CatalogListing.aspx… has specifically hollow metal spheres for sale, but the shipping for me would cost more than the product, so I'm not sure it's worth it.

    28. Fb_profile_picture.small

      Creator TeslaTronix on June 7, 2013

      4 and 6 inch spheres will soon be available on the site. A copper sphere would probably work well too. Anything metallic can serve as a top load within reason. Copper is heavy, and will oxidize like the statue of liberty however. Do you happen to have a source for copper spheres? If so I would like to take a peek...

    29. Shirt_918thefan_forsciencetwo_lrg.small

      Creator Anomaly on June 7, 2013

      Or should a 4" sphere be plenty? If so, is there any way I could just purchase one through the Tesla Tronix site?

    30. Shirt_918thefan_forsciencetwo_lrg.small

      Creator Anomaly on June 7, 2013

      I was wondering if there was much difference in material used for the top load sphere. I am trying to choose between a 5" or 6", steel or copper sphere to use. Which do you think would work the best with this setup?

    31. Fb_profile_picture.small

      Creator TeslaTronix on June 4, 2013

      There are a few lower tier kits left, and the completes will round out the end of this month. We are also compiling a list of people who had incorrect addresses, return postages/ect, and we will contact those individuals.

    32. Fb_profile_picture.small

      Creator David Rice on June 4, 2013

      Same here. Nothing here in Cali.

    33. Missing_small

      Creator Suzy Sturm on June 4, 2013

      I still do not have my device. I understand it was due to be shipped sometime in May. I wrote a week ago and no response to my email. Could you please let me know when the device will be shipped?

    34. Fb%20profile.small

      Creator Jan Babiuch-Hall on May 31, 2013

      As luck would have it, I got my Upgraded Domestic Kit less than 14 hours after posting that comment asking about it.
      Looks good!

    35. Missing_small

      Creator Ahmed Elibiary on May 31, 2013

      Im in the UK and I brought the International Kit but haven't received it so just wondering how long will it take?

    36. Missing_small

      Creator Paul Ellis on May 31, 2013

      I got the PDF link, What is the user name?

    37. Fb%20profile.small

      Creator Jan Babiuch-Hall on May 31, 2013

      Has anyone received their Upgraded Domestic Kit yet? May is almost over and mine hasn't come in.

    38. Fb_profile_picture.small

      Creator TeslaTronix on May 25, 2013

      Craig, as stated in the paper work, these kits are designed around inch and a quarter diameter PVC for the secondary. You have enough magnet wire for 9+ inches of windings. the domestic kits shipped with either 9 or 10 inch pieces of PVC, and the remaining wire is to be used for the top load (toroid).

      The other option- extra wire can be salvaged (from other old coils, transformers, thin spare junk wire) for the top load, and the entire spool of 32 AWG can be used to wind a larger primary.

      There are other options for top loads instead of using part of the 32 AWG, if you so choose to make a large secondary.

    39. Missing_small

      Creator Craig Moehl on May 25, 2013

      Finally received my kit in London. I knew the PVC pipe was not included to reduce shipping but where is the information to replace this component myself? I think you guys have a good thing going but will be hampered by a lack of empathy for your clients. I see this all the time - great tech, poor people skills. Please reply as there will be loads (?) of others wondering the same thing! Light the world.

    40. Missing_small

      Creator Denita Carman on May 8, 2013

      Hi, just wondering how the 100.00 kit is coming along...we anxiously await...thanks!!

    41. Fb_profile_picture.small

      Creator TeslaTronix on May 2, 2013

      Items have been shipping these past couple weeks. We should be fully caught up by the end of this month.

    42. Fb_profile_picture.small

      Creator David Rice on May 2, 2013

      Wondering on delivery as well. Cheers!

    43. Sergeantjoe01.small

      Creator JadeL on April 19, 2013

      I'm thinking about asking my local community college if they would be interested in acquiring a Tesla sphere, once I've tinkered with it, as a donation... They just finished building two very nice (and expensive!) science buildings/infrastructure, so hopefully the teachings of Tesla might be something they could incorporate into one of their curricula...

    44. Missing_small

      Creator Michael MacDonald on April 11, 2013

      What is the status on fulfilment's?
      I provided my delivery info weeks ago, just wondering an eta.
      thanks

    45. Missing_small

      Creator Torre Del Mar on April 10, 2013

      You sent me this email:
      Please respond now!
      TeslaTronix- Tesla Power For The Masses needs some info from you to deliver the reward you selected on Kickstarter.
      Click here to respond
      Clicking here to respond takes me to your website home page. Now what? How do I communicate with you guys? How do I get my delivery info to you if that is what you need?

    46. Joshpic2.small

      Creator Josh McCormick on March 25, 2013

      I was going to go for the $325 tier, but I wasn't entirely sure that they were capable of delivering. That said, if this project proves to do well, I'd certainly be interested in getting a high-end tesla unit for myself.

    47. Fb_profile_picture.small

      Creator Travis Overton on March 24, 2013

      When can I expect the plans to build my own? I'm very excited!

    48. Missing_small

      Creator Jason Liles on March 8, 2013

      Can't wait, but think i deleted the email for info.. was cleaning spam and it went poof as i noticed to late it was from kickstarter...

    49. Aug-003_small.small

      Creator August Sturm on March 6, 2013

      Congratulations!

    50. Jewelsaloha_outlinelogowebsite_pic.small

      Creator eBoat Hawaii on March 6, 2013

      Aloha,

      I am so glad your project was successful and I am so excited to be receiving our own kit. We look forward to hearing all of the new and inventive ways these technologies will be used. We will certainly be posting updates and information on how we at Jewels of Aloha will be using this awesome product. You can visit us at www.JewelsOfAloha.com for updates on our up coming Hybrid Fishing Boat Kickstarter project.

      Mahalo and keep up the great work.

Show older comments
463
Backers
$38,946
pledged of $2,500 goal
0
seconds to go
  • Pledge $1 or more
    You selected

    55 backers

    Every dollar helps!

    Estimated delivery:
  • Pledge $15 or more
    You selected

    30 backers All gone!

    Plans, circuit diagram, parts list on paper, mailed to your address.

    Estimated delivery:
    Add $15 USD to ship outside the US
  • Pledge $25 or more
    You selected

    30 backers All gone!

    All of the above + a DVD copy with PDF files of all of the above, and instructional videos on how to assemble every individual component.

    Estimated delivery:
    Add $15 USD to ship outside the US
  • Pledge $25 or more
    You selected

    23 backers Limited (177 left of 200)

    Additional DVDs. Units will be shipped out as soon as possible after successful funding!

    Estimated delivery:
    Ships within the US only
  • Pledge $50 or more
    You selected

    50 backers All gone!

    Round 2 of domestic kits, due to an overwhelming response!

    Estimated delivery:
    Ships within the US only
  • Pledge $50 or more
    You selected

    50 backers All gone!

    All of the above + a kit of the essentials to assemble your very own Tesla Tronix Slayer Exciter Tesla Coil. One 2*3 circuit board, one transistor, 2 diodes, a resistor, heat sink, PVC for L2, 3 9V batteries and ample wire for both L1, L2 and C1(Toroid). Also 5 LEDs and an additional resistor for the construction of a tuning wand.

    Estimated delivery:
    Ships within the US only
  • Pledge $75 or more
    You selected

    50 backers All gone!

    UPGRADED domestic kits. A stainless steel sphere will be included instead of materials to wind a toroid. Components for the base will also be included with this kit.

    Estimated delivery:
    Ships within the US only
  • Pledge $75 or more
    You selected

    35 backers All gone!

    INTERNATIONAL KIT. Same as the $50 Kit, however without the PVC for L2.

    Estimated delivery:
  • Pledge $75 or more
    You selected

    42 backers Limited (108 left of 150)

    Second round of UPGRADED domestic kits. A stainless steel sphere will be included instead of materials to wind a toroid. Components for the base will also be included with this kit.

    Estimated delivery:
    Ships within the US only
  • Pledge $100 or more
    You selected

    25 backers All gone!

    All of the above(kit+plans) + a 30W soldering iron, rosin core solder, and an extra board, transistor and set of diodes and LEDs.

    Estimated delivery:
    Add $45 USD to ship outside the US
  • Pledge $150 or more
    You selected

    8 backers Limited (12 left of 20)

    Instructional DVD with literature, a fully wound 1000 turn L2, 3 9V batteries, a tuning wand, and parts to complete the rest of the Tesla coil.

    Estimated delivery:
    Add $45 USD to ship outside the US
  • Pledge $175 or more
    You selected

    5 backers Limited (5 left of 10)

    Instructional DVD with literature, a fully wound 1500 turn L2, 3 9V batteries, a tuning wand and parts to complete the rest of the Tesla coil.

    Estimated delivery:
    Add $45 USD to ship outside the US
  • Pledge $200 or more
    You selected

    10 backers All gone!

    Instructional DVD with literature, a fully wound 2500 turn L2, 3 9V batteries, a tuning wand and parts to complete the rest of the Tesla coil.

    Estimated delivery:
    Add $50 USD to ship outside the US
  • Pledge $275 or more
    You selected

    7 backers Limited (3 left of 10)

    A fully tested and complete Tesla Tronix 1500 turn Tesla coil, tuning wand and a DC power supply.

    Estimated delivery:
    Add $50 USD to ship outside the US
  • Pledge $325 or more
    You selected

    24 backers Limited (1 left of 25)

    Second round of complete 2500 turn Tesla Tronix Tesla coils.

    Estimated delivery:
    Add $50 USD to ship outside the US
  • Pledge $325 or more
    You selected

    10 backers All gone!

    A fully tested and complete Tesla Tronix 2500 turn Tesla coil, tuning wand and a DC power supply.

    Estimated delivery:
    Add $50 USD to ship outside the US
  • Pledge $400 or more
    You selected

    4 backers Limited (21 left of 25)

    10 essential kits w/LEDs!- Great for the classroom, or as gifts! (with PVC)

    Estimated delivery:
    Add $80 USD to ship outside the US
Funding period

- (30 days)