Share this project

Done

Share this project

Done
A 28mm Wargaming Mill, The start of an industrial scenery table. A miniature structure for skirmish gaming or as a display piece.
16 backers pledged AU$ 2,344 to help bring this project to life.

About

AU$ 2,344

16

Welcome to my new Kickstarter to supply the first of my 28/30mm wargame buildings. In this campaign I am offering a 28/30mm Water Mill with Main House, the Mill has 4 levels, each with a single room and staircase between levels. An additional 2 story building with external stairs is attached via a covered walkway.

The Kits includes deep and wide etched stonework and floorboards ready to easily paint, 4 pieces to simply glue into recessed window openings to make up each leaded window, hinged doors, and roof tiles allowing you to build a working model, display or centre piece.

The kit is made from lasercut MDF, greyboard, Resin card and acetate.

 If this campaign is successful it will allow me to continue with a range of 28/30mm multi story Industrial structures, 3D bases, walkways and bridges for a new 4x4 Industrial themed gaming table. A table suitable for Fantasy, Scifi and WW1 or WW2 Europe. The sort of skirmish table suitable for Ogres, Goblins, Dwarfs, Zombies, anything fantasy, I can imagine it becoming a table for Space Marines or Star Wars Legion to fight over or a Nazi secret weapons base for Germans to defend to the last man. Like our games, our imagination will rule the table.

My previous Kickstarter can be seen at http://kck.st/2uKtnhD

To keep it simple, I am offering 4 pledge levels:

Pledge Level 1

 The standard Water Mill kit with a cut-off water wheel suitable to sit on any flat gaming table. All levels clip together easily to hold a solid structure but come apart easily for internal play. This Level not suitable to motorise.

Dimensions 330mm wide x 235mm deep x 290mm high

Pledge Level 2

 This level includes the Water Mill kit with 300x300mm Base kit + 300x50mm Water channel kit.(not shown) All levels clip together easily to hold a solid structure but come apart easily for internal play. The base will be the first step in my 3D Industrial table. Suitable to be motorised.

Pledge Level 3

 project video thumbnail
Replay with sound
Play with
sound

This level includes the Water Mill kit with 300x300mm Base kit + 300x50mm Water channel kit + Motorising kit including motor, gearing, switch and battery holder that fit in bottom room of main building.

Pledge Level 4

 28mm Figures in photo only shown for scale, not supplied with kit.

This level is the top level and includes the Water Mill with base and motorising kit professionally assembled (not installed in photos), painted and detailed by me. At this stage I will be offering 2 base colour schemes, A cool grey (above) and a warmer brown grey version as shown below.

Level 4 pledge in Brown/Grey
Level 4 pledge in Brown/Grey

Postage

As anyone who has purchased from Overseas lately will know, postal rates are getting expensive.This kit weights almost 3kg (6.6lbs)

Australia - Free (Courier)

New Zealand - $30-$40 (Zone 1) by Standard air.

United States & Canada - $50-$60 (Zone 4) by Standard air.

United Kingdom - $50-$60 and Europe - $60-$70 (Zone 7) by Standard air.

For other countries, please let me know and I can determine which postal rate to use.

Due to Courier restrictions I cannot ship to PO Boxes in Australia. For Australia and ROW you are also responsible for providing correct address information and ensuring this address is deliverable by normal post delivery.

Address confirmation emails will be sent out when orders are packed. Due to the cost of shipping, orders will not be sent unless your address is confirmed at this time. Basically I want the items to get to you.

Recipients outside Australia are responsible for any import duties/fees of their respective countries.

Some of my previous kits.
Some of my previous kits.

Risks and challenges

The risks are low. I am a professional Props/Model maker for the entertainment industry and have the equipment in house and experience to deliver on this project.

I have also completed a previous Wargame table Kickstarter on time and on budget and supplied around the world. http://kck.st/2uKtnhD

The pledge items have already been designed, cut and assembled, and play tested to make them even better. If the project goes above my solo capacity, I have a group of experienced modellers to support me in getting this project out on time.

Over the last 5 years I have also created a range of 1/48 scale Architectural models that I have supplied around the world so I do have experience in supplying kits and posting around the world.

Learn about accountability on Kickstarter

Questions about this project? Check out the FAQ

Support

  1. Select this reward

    Pledge AU$ 110 or more About $79

    Mill kit, No Base

    Standard Kit to sit on flat table, Water wheel cut to sit flat. Not suitable for motorising.

    Less
    Estimated delivery
    Ships to Only certain countries
    1 backer
    AU$
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge AU$ 125 or more About $90

    Mill Kit with 300x300mm 3D base

    Mill kit on 3d base to fit future Industrial table.

    Less
    Estimated delivery
    Ships to Only certain countries
    5 backers
    AU$
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Select this reward

    Pledge AU$ 155 or more About $112

    Mill kit with 3d base and motorising kit

    Mill kit on 3d base to fit future Industrial table. Comes with motorising kit.

    Less
    Estimated delivery
    Ships to Only certain countries
    6 backers
    AU$
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  4. Select this reward

    Pledge AU$ 310 or more About $224

    Assembled and painted Mill with motor.

    Mill fully assembled,painted and decorated as per photos. Comes complete with motor installed ready to put on table or display. These will be signed and dated by me, and numbered in order of pledge. A Kickstarter Exclusive.

    Less
    Estimated delivery
    Ships to Only certain countries
    1 backer
    AU$
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.

Funding period

- (28 days)