Share this project

Done

Share this project

Done
Professional, Industrial-grade, Out-of-the-Box ready, Highly Reliable, High-Value 3D Printer
73 backers pledged $152,942 to help bring this project to life.

Next Live Broadcast (UStream) - Sunday, November 22nd, 2015 @ 2000hrs (8pm) EST

Posted by Daniel Hutchison (Creator)
1 like

Next Live Broadcast:

Sunday, November 22nd, 2015 @ 8pm EDT (2000hrs):

On UStream: http://www.ustream.tv/channel/hyrel

Agenda:

Hi everyone!  We've been working hard over these past couple of months with a few new head additions to your HYREL machine.  Some of you may already be using our new technologies right now.

Those new head technologies which have been created and released have been, the Volcano, the Krakatoa, the COD (Cross-link On Demand), VCD (Volcano + COD tech), KCD (Krakatoa + COD tech), and the Spindle tool (ST1).

On this broadcast, we've added two more technologies to your arsenal...  one of which we've discussed a little bit about in the past and I'll discuss a little bit about it right now.

Some of you may remember we have been working with lasers.  Well, we hit a couple of challenges along the way to getting the right laser for your HYREL.  First, we wanted to make sure it was going to be safe to use.  I believe we have the safest solution for everyone.  Second, finding the right components was another challenge.  We believe the latest version will provide you with the abilities several of you have asked for - and, you'll need to tune-in tomorrow for us to show you what we've accomplished!

On top of all of this, we will be revamping the entire website, www.hyrel3d.com.  Most of the information will be updated over the next couple of weeks to reflect the new head technologies.

-------------------------------

Broadcasts Info: I highly suggest you install an Adblock add-in for your broadcast browsing experience. For Mozilla Firefox, I suggest Adblock Plus.

In Windows 7, and latest version of Firefox, you can add it in by clicking on the three bars under the Close button, then "add-ons". Search for "Adblock" in the top left-hand corner, and it should be one of the first ones to come up.

If you have questions during the broadcast, the best way to ask them is going through the chat room (unless you're in the room with us!). You will have to sign-up through UStream.tv, but it is free and easy to do so.

Again, thank you to everyone who has joined us on the past broadcasts. We look forward to seeing all of you on this next one!

Best Regards,

Dan

Next Live Broadcast (UStream) - Sunday, July 26th, 2015 @ 2000hrs (8pm) EST

Posted by Daniel Hutchison (Creator)

Next Live Broadcast:

Sunday, July 26th, 2015 @ 8pm EDT (2000hrs):

On UStream: http://www.ustream.tv/channel/hyrel

Agenda:

Hi everyone!  We're going to do a "take two" on how to show you to take multiple .stls, assign your multiple heads to individual pieces, stitching .stls together in Repetrel, etc.

A few new videos are currently posted on hyrel3d.net/instructions and more are incoming.

Also, shout out to one of our kickstarter backers, Rafal for coming by and spending some time with us this weekend!  Thank you for showing us what you've created with your HYREL System.  We're looking forward to seeing what you'll be creating next!

-------------------------------

Broadcasts Info: I highly suggest you install an Adblock add-in for your broadcast browsing experience. For Mozilla Firefox, I suggest Adblock Plus.

In Windows 7, and latest version of Firefox, you can add it in by clicking on the three bars under the Close button, then "add-ons". Search for "Adblock" in the top left-hand corner, and it should be one of the first ones to come up.

If you have questions during the broadcast, the best way to ask them is going through the chat room (unless you're in the room with us!). You will have to sign-up through UStream.tv, but it is free and easy to do so.

Again, thank you to everyone who has joined us on the past broadcasts. We look forward to seeing all of you on this next one!

Best Regards,

Dan

Next Live Broadcast (UStream) - Sunday, July 19th, 2015 @ 2000hrs (8pm) EST

Posted by Daniel Hutchison (Creator)

Next Live Broadcast:

Sunday, July 19th, 2015 @ 8pm EDT (2000hrs):

On UStream: http://www.ustream.tv/channel/hyrel

Agenda:

Hi everyone!  It's been a while since the previous live broadcast and a lot has changed since then.  Tonight, we'll be covering the features of the newest release of software, Repetrel V2.415.  This is a far cry from the early days of Repetrel A.23/33.

For those looking to take multiple .stls, assign your multiple heads to individual pieces, stitching .stls together in Repetrel, etc. -- tonight's the debut night.

In this new release, you will be able to download the following on hyrel3d.net/downloads on Monday, July 20th, 2015.

1.) Repetrel V2.415

2.) Firmware which works exclusively with Repetrel V2.415

3.) Links to the newest version of Slic3r 1.2.9 (stable)

4.) New Slic3r recipes for Slic3r 1.2.9

Further, by mid-week, we will have posted easy "how-to videos" on how to upgrade all of the above.

-------------------------------

Broadcasts Info: I highly suggest you install an Adblock add-in for your broadcast browsing experience. For Mozilla Firefox, I suggest Adblock Plus.

In Windows 7, and latest version of Firefox, you can add it in by clicking on the three bars under the Close button, then "add-ons". Search for "Adblock" in the top left-hand corner, and it should be one of the first ones to come up.

If you have questions during the broadcast, the best way to ask them is going through the chat room (unless you're in the room with us!). You will have to sign-up through UStream.tv, but it is free and easy to do so.

Again, thank you to everyone who has joined us on the past broadcasts. We look forward to seeing all of you on this next one!

Best Regards,

Dan

Next Live Broadcast (UStream) - Sunday, May 7th, 2015 @ 2000hrs (8pm) EST

Posted by Daniel Hutchison (Creator)

Next Live Broadcast:

Sunday, May 7th, 2015 @ 8pm EDT (2000hrs):

On UStream: http://www.ustream.tv/channel/hyrel

Agenda:

Lots of things have been 'cooking' in the lab. Join us this coming Sunday to find out what's the next step forward for 3D printing and your HYREL.

Hint:  Some say it's like you being in a room with your crush...

Broadcasts Info: I highly suggest you install an Adblock add-in for your broadcast browsing experience. For Mozilla Firefox, I suggest Adblock Plus.

In Windows 7, and latest version of Firefox, you can add it in by clicking on the three bars under the Close button, then "add-ons". Search for "Adblock" in the top left-hand corner, and it should be one of the first ones to come up.

If you have questions during the broadcast, the best way to ask them is going through the chat room (unless you're in the room with us!). You will have to sign-up through UStream.tv, but it is free and easy to do so.

Again, thank you to everyone who has joined us on the past broadcasts. We look forward to seeing all of you on this next one!

Best Regards,

Dan

Next Live Broadcast (UStream) - Sunday, April 12th, 2015 @ 2000hrs (8pm) EST

Posted by Daniel Hutchison (Creator)

Next Live Broadcast:

Sunday, April 12th, 2015 @ 8pm EDT (2000hrs):

On UStream: http://www.ustream.tv/channel/hyrel

Agenda:

Thank you to everyone who joined us on the 90th Live Broadcast this past week.  We debuted a lot of information and covered multi-head printing in record time.  Yes, there were far less hiccups with this past broadcast - so if you would like to review it, please head over to the channel link above to view it again.

Since we covered "how-to" on last week's broadcast, we will be using this broadcast to help answer any questions you may have on multi-head printing, along with a few surprises (possibly some hot, laser action - and how you can get your hands on one!)

Broadcasts Info:

I highly suggest you install an Adblock add-in for your broadcast browsing experience. For Mozilla Firefox, I suggest Adblock Plus. In Windows 7, and latest version of Firefox, you can add it in by clicking on the three bars under the Close button, then "add-ons". Search for "Adblock" in the top left-hand corner, and it should be one of the first ones to come up.

If you have questions during the broadcast, the best way to ask them is going through the chat room (unless you're in the room with us!). You will have to sign-up through UStream.tv, but it is free and easy to do so.

Again, thank you to everyone who has joined us on the past broadcasts. We look forward to seeing all of you on this next one!

Best Regards,

Dan