About this project
NOTE: Shipping world wide is available, please see the rewards that say "shipped international".
Well, you have a Raspberry Pi and you want a production quality case for it. I believe this case will meet the needs of most Raspberry Pi owners. The prototype has been made and it works great! Production manufacturers have been contacted and they are ready to build the mold and start producing these units when we are ready. The funding goal is based on a minimum order of 1,000 units of the different parts needed to complete the case.
You will receive the case of your choosing (ABS Plastic or Metal) with the following components:
1 - Panel mount HDMI extension cable
1 - PCB ethernet cable
1 - PCB USB cable
1 - PSU/RJ45/dual-USB circuit board
1 - Power switch
1 - I/O header to screw terminals (If you chose a case with it)
The assembly process is simple:
Insert the USB into the Raspberry Pi and connect the power cable.
Insert the I/O header to screw terminal.
Then, mount the PSU/RJ45/dual-USB circuit board to the bottom of the case. Mount the screw terminal to the back of the case.
Connect the second internal USB if you choose. This can be left disconnected to leave room for internal USB devices to be plugged in.
Connect the Ethernet cable, power switch, and HDMI cable and you are all set.
Have a question? If the info above doesn't help, you can ask the project creator directly.
- (30 days)