Project image
)}
€1,951
pledged of €900pledged of €900 goal
33
backers
49hours to go

All or nothing. This project will only be funded if it reaches its goal by Fri, November 22 2019 8:42 AM UTC +00:00.

Cold War German Bundeswehr

Cold War German Bundeswehr Stl printing files

Cold War German Bundeswehr

Cold War German Bundeswehr Stl printing files

€1,951
pledged of €900pledged of €900 goal
33
backers
49hours to go

All or nothing. This project will only be funded if it reaches its goal by Fri, November 22 2019 8:42 AM UTC +00:00.

About

Cold War – German Bundeswehr

Printable vehicle and figure for wargamer and modeller

For many Years I have produced figure`s and vehicle`s , cast in resin. At several modelling shows I was asked why I did not offer the printing files of our ranges which are sculpted in 3D technology.

My first Kickstarter will go into the Cold War , the German Bundeswehr in the time 1970 – 75 . This is the time where material changed from the US produced M48 , M113 etc. to the next generation of German produced vehicle like Leopard and Marder etc.

This was the time where the Cold War had often been a tip away from becoming a Hot War. On both sides of the Iron Curtain thousands of tanks are waiting for their use. The Bundeswehr was part of NATO, the opponent was the Warsaw Pact. This will be part of another Kickstarter.

The vehicle`s and the figure`s could be best printed on a DLP printer for resin. The weapon of figure are to hard to print on a FDM printer. The proportion of the figure are as natural as possible. Heads and hands a little bigger for better printing but all in all more like the composition from Leonardo Da Vinci than the big headed Wargame figure. Try this out , I hope you like this when you see this in your hands.

The figure`s are scaled for 1/72 that means figure is 24,5mm hight, but without problem you could print the collection in other scale.

32mm = 146%

28mm = 127%

20mm = 83%

15mm =  73%

Modelling photo which are printed on the Anycubic Photon + Shapeways  


 Here some more printed vehicle of our Kickstarter

HS 30 with 120mm Mortar Soltam M120

We made some stretchgoals but you can comunicate with me, if the Kickstarter runs well , feel free to suggest what you think is missing.

Here all vehicle and figure of the Kickstarter:

M 48 A2 GA2              Leopard I.                          Hotchkiss Infantry fighting vehicle short

HS 30 Infantry fighting vehicle                          Marder I. Infantry fighting vehicle

Hunting tank gun                                                  Jaguar II. Hunting tank rocket

HS 30 with 120mm mortar                                  M 42 Duster Anti Aircrafttank

6 different figur German tank crew

12 different figure advancing German soldier

12 different figure marching German soldier

M 48 A2 GA2
Leopard I.
Hotchkiss short
HS 30 Infantry fighting vehicle
Marder 1A1
Kanonenjagdpanzer
Jaguar I. Raketenjagdpanzer
HS 30 with 120mm mortar
M 42 Duster
German tank crew with M 48 A2 GA2
German Soldier Bundeswehr - advancing
German Bundeswehr soldier marching

 The first goal of my Kickstarters has been achieved, it is definitely taking place now. On this occasion I would like to thank all supporters. The handguns of the Bundeswehr are added to the starter pack of Stl files. Accessories that everyone can use.

DKW Munga - both version with canvas / without
VW 181 - both version included - with and with out canvas
HS 30 with 106mm Recoiless gun

 We want to thank all backers who support our project, so we add here another vehicle

M 113 APC - version early Bundeswehr
Unimog 404 with platform
Unimog 404 with radio cabin


 and here we add another APC for our faithfull backers

M 113 G1 - APC German Version
M113 with 120mm Soltam Mortar
M113 with 120mm Mortar
Battailion HQ - 10 figure, desk, chairs, radio etc.
lame duck

Ford G 398 with platform - nickname "Natoziege"
we change the driver cabin with some more detail
Ford G 398 with radio cabin - nickname "Natoziege"
the radio cabin
6 Soldier running out of backdoor of APC - possible M113 G1 / Marder I.
Bundeswehr soldiers for artillery and different vehicle
Hotchkiss short - Ambulance
Hotchkiss ambulance tank printed in 1/87 and primed with RAL 6014
Hotchkiss ambulance tank printed in 1/87 and primed with RAL 6014
Hotchkiss ambulance tank printed in 1/87 and primed with RAL 6014

Risks and challenges

There are no risks for you. At the end of this campaign you will get the Stl files by E-Mail via Wetransfer.
No extra costs for you.
Look to my webshop : www.germania-figuren.eu

Learn about accountability on Kickstarter
Questions about this project? Check out the FAQ

Support

  1. Make a pledge without a reward

    About $12

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge €10 or more About $12

    1. Sergeant

    you choose 1 of the vehicle from this Kickstarter

    Less
    Estimated delivery
    Ships to Anywhere in the world
    1 backer
    About $12

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Select this reward

    Pledge €20 or more About $23

    Lieutenant

    3 vehicle stl at your own choice + the German Bundeswehr tank crew

    Less
    Estimated delivery
    Ships to Anywhere in the world
    2 backers
    About $23

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  4. Select this reward

    Pledge €40 or more About $45

    Captain

    5 vehicle Stl at your own choice + 12 advancing soldiers

    Less
    Estimated delivery
    Ships to Anywhere in the world
    2 backers
    About $45

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  5. Select this reward

    Pledge €65 or more About $72

    General

    all vehicle and figure from this starter set

    Less
    Estimated delivery
    Ships to Anywhere in the world
    27 backers
    About $72

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.