About this project
Upgraded and enhanced from its predecessor, The Apex 2.0 features an innovative two-piece design. Precision machined from a solid block of anodized aircraft-grade aluminum, it now offers dual-side quick-draw thumb-slots, a high-end stainless steel clip for card retention, and is Guaranteed to last a Lifetime!
For Your Pledge:
You will receive your choice of APEX Wallet 2.0 for 35%–50% less than MSRP.
The Apex 2.0:
• Offers 100% RFID Protection (Identity theft proof)
• Features dual thumb-slots
(Easily access cards from both sides)
• Uses NO rubber bands/o-rings/straps, NO elastic
(Which fail, tear, and need to be replaced)
• Uses NO ugly, bulky screws/mounting hardware
• Will last a lifetime - Guaranteed! (See below for details)
We’ve engineered this wallet to minimalist perfection! Every line and every bevel serves a purpose while keeping an aesthetically balanced design — classy and clean.
The APEX 2.0 incorporates TWO easy-slide ergonomic thumb slots, allowing for easy access from either side of your wallet.
We've increased the capacity of this iteration one card from it's predecessor. The new Apex 2.0 is capable of holding 1-8 cards (depending on the type of cards). Because cards differ in thickness, and some have raised numbers, each carry will differ slightly.
THIN & LIGHTWEIGHT
The Apex 2.0 is only 3/8 of an inch thick (.95cm) and weighs just 2oz. – making your wallet comfortable, and barely noticeable in any pocket.
Thanks to the high-quality materials used and method of its construction, you never have to worry about the elements effecting your wallet's looks or performance.
We've created a very unique wallet – The first two-piece metal wallet that uses NO bulky mounting hardware. NO ugly screws, NO nuts or bolts that need to be tightened. NO rubber o-rings or rubber straps that will need to be replaced. NO elastic that can tear, fray, lose it's elasticity and must be replaced.
The Apex 2.0 is 100% RFID-Proof. This means your identity and credit card information can not be skimmed or scanned through your pocket! Because our wallet is 100% metal construction, it encases your cards with stainless steel and aluminum from all angles, so your ID and critical card info is safe and secure from wireless theft.
That's right, each Apex 2.0 comes with a lifetime "Repair or Replace" warranty covering it's functionality.
If at any point your wallet stops functioning under normal wear and tear conditions (spring failure), we will fix or replace your wallet free-of-charge for as long as you own it!
You're going to own this wallet for the rest of your life! A lot happens over a lifetime. All metals can dent and scratch, and all finishes can wear, and our wallets are no exception to those circumstances. That being said, we think it adds character, and since there is no way to avoid the inevitable, this guarantee does not cover; dents, dings, scratches, wear of finish, damage caused by accidents, or extreme circumstances (such as purposely trying to break, bend, or disassemble the wallet).
Case Material: Aircraft-grade billet aluminum
Clip Material: Stainless Steel
Finish: Case – Anodized (for durability)
Clip – Media tumbled (for smooth edges)
Outside Dimensions: .375" (.95cm) x 3.63" (9.2cm) x 2.46" (6.2cm)
Capacity Depth: .3" (.76cm)
Weight: 2 oz.
Kickstarter Campaign: February 13th – March 21st
Production: March 21st – May 20th (60 Days)
Buffer for Unexpected Delays: May 20th – June 3rd (*14 Days)
Fulfill/Ship Rewards: June 5th – June 9th (**4 Days)
*While these 14 days are a precaution and calculated into our timeline, they are only a possibility. If we encounter no delays, shipping may begin as soon as May 22nd.
**Four days is the time needed to prepare and ship all rewards. Actual shipping may possibly occur sooner than outlined in our timeline.
We've upped the ante on innovation, and this beautiful streamlined wallet speaks volumes to design, form, and function. We've spent over a year on R&D, prototyping and testing – now we need to turn to you, our fellow Kickstarters, for your help to successfully fund the minimum order requirements to begin production!
We’re humbled that you’ve taken the time to learn about our newest project and we sincerely can’t thank you enough for the support. None of this would be possible without you! Thank you!
Risks and challenges
Every new project faces unforeseen challenges... But rest assured that you have nothing to worry about when pledging for your Apex 2.0! This is why:
Luckily for you, and us, this is our 4th Kickstarter Campaign so we are very familiar with all the little hiccups that can, and almost always occur! Learning from our very successful past, (over 8,000 happy backers served so far) we've done everything possible to streamline all of our processes behind the scenes and we are working with the same trusted manufacturer on this project that we've been working with for the past three years.
We've worked out all the fine details far ahead of time as well as built in a 2-week (14 day) buffer in our delivery timeline just in case something unexpectedly occurs.
Our biggest challenge is not raising our minimum funding goal, but you won't let that happen, because you're awesome!
Support this project
- (36 days)