Share this project

Done
Embed

Share this project

Done
Email

HUDIFY | A Transparent GPS That Keeps Your Eyes On The Road

An automotive accessory that transforms the smartphone you already own into a portable head-up-display
An automotive accessory that transforms the smartphone you already own into a portable head-up-display
PRE-ORDER NOW
1,894 backers pledged CA$ 154,374 to help bring this project to life.
Rewards Campaign FAQ Updates 35 Comments 960 Community
Share this project

SHIPPING AND LOGISTICS

Backers,

Thanks again for your patience (to those of you who've been patient).  As we stated in the last update, the change in logistics providers came with some prerequisites (TSA... Read more

50 Comments 38 likes

Shipping Status - UPDATED

Backers, 

There are two things happening right now, both of which we have no direct control over, and we wanted to put out a quick update.  Read below for details.... Read more

28 Comments 18 likes

REPOST: UPDATED shipping status.

 Backers,  

This is a re-post of the prior update (since the video for some reason wasn't working).

Sorry for the delay in getting this video up - it's been... Read more

13 Comments 19 likes

UPDATED shipping status.

Backers,

Sorry for the delay in getting this video up - it's been a hectic month over here.  Video below.  P.S. Sorry for the out-of-focus first segment of the video,... Read more

12 Comments 7 likes

Shipping Status.

Backers,

Thanks as always for your patience.  It's been a very busy month over here on our end, but we've negotiated and made arrangements for our logistics carrier to begin... Read more

9 Comments 39 likes

Locking Up Addresses In 24 Hours

Backers,

This is a quick reminder that we will be locking up your addresses in 24 hours. 

If you haven't updated your address yet, please refer to the previous update... Read more

17 Comments 21 likes

Finalizing Shipping Address On BackerKit

Backers,

As promised on the previous update, we are going to provide a step-by-step guide to updating your address on BackerKit. 

If you do not need to update your shipping... Read more

3 Comments 7 likes

SHIPPING UPDATE

Backers,

Again, thanks for your patience, as this update is a but further protracted than we intended.

After delays at customs (and multiple thousands of dollars in unexpected fees/costs absorbed),... Read more

9 Comments 29 likes

ASSEMBLY, QC, AND SHIPPING UPDATE

Backers,

Thanks again for your patience, see the below video for details on the status of assembly and shipping:

A few photos:

9 Comments 17 likes

PRODUCTION MANUFACTURING WRAPPING UP NOW

Backers,

First, thank you very much for your patience.  To those of you who posted such kind thoughts and expressed your concern for my Wife during her last Cancer Surgery,... Read more

7 Comments 31 likes

Production Update

Backers and valued customers,

Explanation for the unexpected "radio silence":

First let me say I'm sorry for the delay in communication.  As I said in a previous brief update, my... Read more

17 Comments 45 likes

GETTING ON TRACK

A video explainer on the 'state of affairs' (text below):

 

First, a few important side-notes:

There have been a few questions (and implications) regarding sales of Hudify to non-kickstarter... Read more

23 Comments 31 likes

SAMPLES ARE IN - AND THEY LOOK GREAT!

Backers,  

It's taken us a couple more weeks than we thought (three weeks since our last update), mostly because China has been a bit slowed-down due to the Autumn... Read more

8 Comments 26 likes

ALL HURDLES CLEARED! (Public/Repost)

Backers, it's a good day over here at Connectable Design & Dev, and I'm sure the Hudify, Inc. team feels the same! Please take the time to read this update... Read more

3 Comments 11 likes

ALL HURDLES CLEARED!

2 Comments 19 likes
For backers only

The Last Hurdles

Hello Backers!

Bradley here from Connectable Design and Development!  You may recognize my name from the prior video updates.  As you may know, we are the firm assisting the Hudify... Read more

4 Comments 9 likes

Dashboard Mount Tests + Reflector + Shipping Timeline Update

Hey backers - it's been a month since our last update but we are back with tons of information. Please take the time to read through this updateso you... Read more

7 Comments 28 likes

Manufacturing Update #5 + Shipping Timeline Update

Hey Backers,

Here's Bradley again from Connectable Designs building on our previous manufacturing update. Check out the video below!

We are still working on the issues mentioned in Manufacturing Update... Read more

1 Comment 5 likes

Manufacturing Update #4 + BackerKit Announcement

Hey backers,

The first set of master units has arrived! We are very impressed with the quality of the samples given that these are the first ones off the assembly... Read more

3 Comments 8 likes

Manufacturing Update #3 + BackerKit Announcement

Hey backers - tooling has now been completed and the first injection molded parts have been made! This marks a very big milestone for our project!

"Heads-up" (get it? haha):

You... Read more

6 likes

Manufacturing Update #2

Hey backers!

It's April! As expected on our manufacturing timeline, we are almost finished with the production of tooling which consists of injection molds, stamps, jigs, dies, and everything else... Read more

7 likes

How To Mount Your Phone On Magnetic Cradle

Hey backers - we hope you had a great weekend!

We received a couple of inquiries in the past few weeks regarding how your phone would attach to Hudify's magnetic... Read more

1 Comment 9 likes

Manufacturing Update #1

Hey backers - this update's going to be short and sweet!

As promised in the previous update, Bradley from Connectable Designs (our manufacturing and development partner) is going to discuss... Read more

3 Comments 10 likes

BackerKit Reminder and Packaging Update

80% of the surveys have already been filled out!

We're completely shocked and thankful that 1,497 of you have already filled out the surveys in just 5 days! From our... Read more

9 Comments 5 likes

Help us create Hudify's packaging design

We are so thankful that we have a little more than 2,000 individual backers to help us co-create every aspect of Hudify! We absolutely love the support you have given... Read more

21 Comments 6 likes

BackerKit surveys are coming!

Hey everyone - we will be sending an email with a special link to BackerKit surveys in the next few days!

Since it will be sent via the email associated... Read more

6 likes

Top 5 Head-Up Display Apps for Android

While we specifically designed Hudify to be used with Navmii, there are many other HUD apps on the Google Play Store to choose from. We thought it would be useful... Read more

2 Comments 12 likes

Manufacturing and Navmii World update!

8 likes
For backers only

It's a wrap! We did it! Over 128% funded

CONGRATULATIONS!

We did it! 1,894 backers around the world are making this happen. We can't thank you enough for that. Feel free to laugh, dance, smile, pump a fist in the... Read more

3 Comments 14 likes
Successfully raised CA$ 154,374 with 1,894 backers

Let's talk stretch goals, design improvements, and new features!

Let's brainstorm!!

We got funded 4 days ago and our backers are growing pretty fast! We hope you're excited as we are!

Now we need your help thinking of possible... Read more

16 Comments 6 likes

We are now fully funded!!

THANK YOU!!

Hudify backers... do us a big favor and pat yourselves on the back because we're one step closer to making Hudify a reality!!! Thank you from the bottom... Read more

1 Comment 2 likes

100k and counting! Check out these design improvements!

Congratulations! We just hit 100k with 12 days left!

Can you believe that? We started with nothing 38 days ago and now there are more than 1,200 backers who have... Read more

5 likes

Tooling will be starting soon!!!

Tooling was originally going to start in the second week of January but we're moving it earlier. It takes about 30-45 days to finish. By doing this, we're hoping to... Read more

5 likes

Hudify Nighttime Driving Video

First of all, we want to thank each and every one of you for your support so far! We've raised $82,000+ CAD of our $120,000 with 19 days left. We... Read more

7 likes

The First 48 Hours On Kickstarter

With your help, we were able to raise 9% of Hudify's campaign goal in just 48 hours! We have 48 days more to go but we just want to quickly... Read more

3 likes
Project launched