Imagine a world where you can charge your phone without a wire. ROBOQI is what you need! ROBOQI is the coolest and safest wireless charger ever.
ROBOQI is designed with a state-of-the-art automation system. All you need to do is place your phone on the ROBOQI, the phone will press against the quick contact sensor on the surface of ROBOQI, this will trigger the built-in electric motor that controls the robotic arms which will close automatically.
Users will especially chuckle at the small but noticeable robotic sound that indicates the arms opening and closing.
ROBOQI can charge your phone anywhere anytime. Now ROBOQI can hold your phone firmly, and free your hand when typing, FaceTiming, playing games, watching movies, etc.
ROBOQI is featured on
Amazing ROBOQI Review
The robotic arms are well padded with soft silicone to securely grip your phones without any damage.
Advanced Robotic System
1. Robotic Arms
The Robotic arms are well padded with soft silicone to securely grip your treasured phone without any damage, making the auto-inductive charging system conveniently secure. Release in just one second.
2. Flawless Detection Sensor
ROBOQI is built with a contact sensor. When the sensor is pressed, the motion control is triggered and the robotic arms are closed, providing a tight grip on your phone. The wireless charge is activated and the phone is charged.
When the sensor is released, the electric motor will open the robotic arms. This advanced and flawless detection technique will ensure you with the best charging experience.
3. USB-C input guarantees fast charging speed
The ROBOQI's advanced robotic system automatically sets off a green LED light to indicate charging.
Quick Response Sensor and Robotic System
ROBOQI can be installed on car air vent, dashboard and windshield.
Charging while watching movie
Charging while driving
No need to worry about the grasp of the robotic arm, we tested it thousands of times to ensure its grip strength is enough to hold your phone even on bumpy road.
How to install ROBOQI
Fast Wireless Charging Technology
ROBOQI supports the latest Qi wireless charging version 1.2.4, including 7.5W high speed wireless charging for the iPhones as well as 10W high speed wireless charging for the Android devices. The conversion efficiency of ROBOQI has been increased to 80%, which is faster than most wireless chargers whose conversion rate is only up to 60%.
Meanwhile, it’s perfectly compatible with 99% of all kinds of wireless charging mobile phones. (Please Note: 10W/7.5W fast-charging can ONLY be supported with a QC 3.0 adapter and a 2A USB Cable)
Even if your phone doesn’t support wireless charging technology, you can still upgrade it with additional receiver. Select the special rewards and you will get Qi wireless charging receiver Rx with ROBOQI.
How it will be used:
- 1: Insert the Qi wireless receiver patch's connector into phone’s charging port;
- 2: Attach the Qi wireless receiver patch onto the iPhone's back cover;
- 3: Optional - install your iPhone with non-metal phone case;
- 4: Place the phone onto the ROBOQI and enjoy great charging experience.
Traditional Qi wireless charger is inefficient and generates a lot of heat which may interrupt or halt charging. ROBOQI is designed with power efficient components so its heating amount is 20%~30% lower than other similar products. ROBOQI also has an intelligent foreign objective detection (FOD) system. Any metal or other none Qi compatible objects that may cause overheating your phone will be detected.The Qi certificated wireless charging technology will charge your phone fast and safe. The built-in smart chip protects your Qi compatible smartphones against over-voltage and over-current.
The comparison of all wireless charger in the market.
It took approximately one year from the initial idea to the final prototype. We were initially inspired by the movie Ironman and decided to combine the amazing Robotic style into our wireless charger. However, a perfect product takes thousands of abortive attempts. We tried to use an infrared sensor but then realized that it leads to excessive detection errors. This problem was finally solved by replacing the infrared sensor with a contact sensor on the surface. We believe our accurate detection technique will assure our customers with the best experience.
Have a profile review
We are an energetic team who loves creating innovative products to solve daily problems. Tony, the founder of this project, received his Mechanical Doctor’s degree in HKUST. He has more than 10 years of experience in electronic products. ROBOQI represents our passion for creating a product to be a part of your life. With your support, we can start mass production on ROBOQI and deliver them worldwide.
For any questions please contact this email: firstname.lastname@example.org
For more news, updates and more please follow us on:
Risks and challenges
The product in the video is only a prototype for testing and filming. We keep close contact with our manufacturers because we want to be prepared for any possible production obstacle. We have completed all testing and development. Our selected producers are ready to collaborate with us under our conditions and schedule. Your donations will cover the product expenses, packaging, assembly and shipping. We are committed to delivering the product on time with the highest quality. They are scheduled to deliver at the end of August.
We wanted to have everything prepared before the start of our campaign and we will update backers with any progress about production.
- (31 days)