€740
pledged of €2,350pledged of €2,350 goal
12
backers
0seconds to go
Funding Unsuccessful
The project's funding goal was not reached on Thu, November 15 2018 5:05 PM UTC +00:00
TommyBy Tommy
First created
TommyBy Tommy
First created
€740
pledged of €2,350pledged of €2,350 goal
12
backers
0seconds to go
Funding Unsuccessful
The project's funding goal was not reached on Thu, November 15 2018 5:05 PM UTC +00:00

About

           WELCOME TO MY PROJECT :-)    

Goal of the Kickstarter - Project 

The time and cost of this project has already been covered by my own. The funds collected in this Kickstarter, along with our own resources, will allow i to add even more Bundeswehr models and of course other models to my portfolio.

Not that i only make Army vehicles, i make individual toys for children from biodegradable materials. My little one has really cool ideas :-),  to make these models and Future models as perfect as possible and to make the models as easy to print as possible. This challenge is very time consuming and costly , a new website, new 3D printer etc. - that's why i need your help!                        Thank you very much :-

3D GERMAN ARMY TANKS & VEHICLE
3D GERMAN ARMY TANKS & VEHICLE

With this project I will bring you a first collection of German Federal Armed Forces Vehicles, which also exist in the German Bundeswehr. All models are as faithfully printed as possible and come with a nice finish. The Bundeswehr models are printed with 0.1 shells and without support. The small fillegralen parts were edited a bit and then painted afterwards. My first Kickstarter project includes ten German Bundeswehr vehicles ranging from the Boxer to the Unimog. All STL & OBJ files i checked for errors and corrected again so that each vehicle can be printed to 100%.                  My models are 1:87, feel free to scale yourself.

 when the goal is reached,come these four vehicles !So it would now be 16 vehicles :-) hopefully we will achieve the goal.
 
 
 
Note, of course every 3D printer works different, it may be that you should make some fine-tuning on it. Check this Simplify3D User Guidelines to avoid any 3D printing problems with this software.
The Puma is a modern German infantry fighting vehicle
The Puma is a modern German infantry fighting vehicle
 
Unimog is a range of multi-purpose all-wheel drive medium trucks
Unimog is a range of multi-purpose all-wheel drive medium trucks
The Boxer is one of the most protected armored personnel carrier in the world.
The Boxer is one of the most protected armored personnel carrier in the world.

The tanks & vehicles is only for personal use!!! If you are interested in a commercial license, feel free to contact me at: best@bmbestsolution.com                              

The Leopard 2 A6 is a main battle tank  for the  German Army.
The Leopard 2 A6 is a main battle tank for the German Army.
The Wiesel Armoured Weapons Carrier (AWC) is a German light air-transportable armoured fighting vehicle, more specifically a lightly armoured weapons carrier
The Wiesel Armoured Weapons Carrier (AWC) is a German light air-transportable armoured fighting vehicle, more specifically a lightly armoured weapons carrier
The heavy-duty transporter (SLT) Franziska is a special military development of the German Bundeswehr
The heavy-duty transporter (SLT) Franziska is a special military development of the German Bundeswehr
The Puma is one of the world's best-protected IFVs, while still having a high power-to-weight ratio.
The Puma is one of the world's best-protected IFVs, while still having a high power-to-weight ratio.
Ozelot is based on the weapon carrier Wiesel 2 developed light armored short-range anti-aircraft missile system of the Bundeswehr.
Ozelot is based on the weapon carrier Wiesel 2 developed light armored short-range anti-aircraft missile system of the Bundeswehr.
The Marder is a German infantry fighting vehicle operated by the German Army as the main weapon of the Panzergrenadiere.
The Marder is a German infantry fighting vehicle operated by the German Army as the main weapon of the Panzergrenadiere.
The Fennek is a Light Armoured Reconnaissance Vehicle of the German Bundeswehr
The Fennek is a Light Armoured Reconnaissance Vehicle of the German Bundeswehr

I wish you a lot of fun with 3d printing and painting:-)

 project video thumbnail
Replay with sound
Play with
sound
  • Off
    • English

IS IN THE PROCESS - COMING SOON 

Amphibie M3 & MAN Lars 2
Amphibie M3 & MAN Lars 2
Fuchs & VW Kübelwagen
Fuchs & VW Kübelwagen

 The Second Project 

You do not have any 3D printers, I like to send you your model. So at home you can build it together and paint it to your own liking, Of course I'm not the best painter ;-) The material is 100% biodegradable, the earth has enough plastic waste. But first i have to find a good way for international shipping. 

Note, in the small filigree parts should be a little rework!

Keiler &  STW Gasoline Truck
Keiler & STW Gasoline Truck
Luchs & MAN FlagRak Roland System
Luchs & MAN FlagRak Roland System
MAN with boat and Trailer & German Munga
MAN with boat and Trailer & German Munga

Risks and challenges

I have all the files.
All STL & OBJ files I checked for errors and corrected them again so that each vehicle can be printed to 100%.
Once properly completed with Kickstarter, the files are sent 100 %!
Depending on your desire to buy, the sending of files can shift backwards. The Files will be sent from December 2018.
So this Project is mostly risk free!
The tanks & vehicles is only for personal use!!!
If you are interested in a commercial license,
feel free to contact me at: best@bmbestsolution.com

Because of the reward

I am working on some new vehicles, but I do everything by myself and can not say how long it will take.
I give my best! :-)
I can only offer what I really have.
I think, it better the sparrow in the hand than the dove on the roof!

the second project - not everyone has a 3d printer

From the second project.
I would like to ship models.
Before that I have to organize the distribution.
So I send you your model, and at home you can build it together and paint it to your own liking. :-)
The Bundeswehr is happy with my 3d models! :-)

I hope you like my project, have a lot of fun with 3d printing and painting :-)

Thank you for your support

best@bmbestsolution.com

Learn about accountability on Kickstarter

Questions about this project? Check out the FAQ

Support

  1. Select this reward

    Pledge €1 or more About $1.14

    enjoy & go with to the future

    if you want to accompany my projects ! I thank you very much

    Less
    Estimated delivery
    3 backers
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge €15 or more About $17

    Lieutenant

    pay one, take three
    You can select one vehicle plus two out of the twelve vehicles - the STL or OBJ files will be sent to you.

    Less
    Estimated delivery
    Limited 1 backer
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Select this reward

    Pledge €30 or more About $34

    First Lieutenant

    Two STL or OBJ Files You can choose two Vehicle from the ten Vehicles + one File of your choice from the ten vehicles - the STL or OBJ files will be sent to you.

    Less
    Estimated delivery
    Limited 1 backer
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  4. Select this reward

    Pledge €60 or more About $69

    Captain

    pay four, take six!
    You can select four vehicles plus two out of the twelve vehicles the STL or OBJ files will be sent to you.

    Less
    Estimated delivery
    Limited 0 backers
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  5. Select this reward

    Pledge €90 or more About $103

    Lieutenant Colonel

    Six STL or OBJ Files - You can choose six Vehicle from the ten Vehicles + one File of your choice from the ten vehicles - the STL or OBJ files will be sent to you.

    Less
    Estimated delivery
    Limited 1 backer
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  6. Select this reward

    Pledge €120 or more About $137

    Colonel

    pay eight, take ten!
    You can select eight vehicles plus two out of the twelve vehicles - the STL or OBJ files will be sent to you.

    Less
    Estimated delivery
    Limited 0 backers
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  7. Select this reward

    Pledge €150 or more About $171

    Brigadier General

    All STL or OBJ Files -
    you get all the files + a surprise from the next vehicles ! look at the photos - the STL or OBJ files will be sent to you.

    Less
    Estimated delivery
    Limited 4 backers
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.

Funding period

- (30 days)