Cuando un proyecto tiene un producto final tangible, es necesario mostrar a los patrocinadores la documentación propia de un prototipo, que es un modelo preliminar del producto final. En esta galería el creador muestra fotos y videos proporcionando al patrocinador una idea del estado del proyecto, qué se ha conseguido y qué falta por conseguir. Aunque el proceso es diferente para cada proyecto, en general se ven las siguientes fases:
Prueba de concepto
Exploraciones que comprueban la idea y su funcionalidad.
Demuestra la funcionalidad del producto final, pero su apariencia es distinta.
Prototipo de apariencia
La apariencia del prototipo es igual a la del producto final, pero no tiene funcionalidad.
Prototipo de diseño
Es igual al producto final en apariencia y función, sin embargo, está manufacturado de manera diferente.
Prototipo de producción
Apariencia, funcionalidad y método de manufactura son iguales en prototipo y producto final.
What or who is Gerbil?
This Kickstarter project upgrades the popular K40 laser cutter/engraver. If you don't already own a K40, go buy one on eBay of similar - they're now really affordable, starting at around $250 USD.
Extremely easy, just import a picture in Inkscape and engrave or cut (no manipulation effort)
16 bits PWM, 380DPI resolution engraving (enabling max. resolution of stock laser), not a stock Arduino but bespoke design
Keeps the CO2 Tube energized during engraving, so better quality engraving and longer life span of the laser tube
Just plug and play, all the hard work has been done by us
and ... it is Open source!
Gerbil is a small device to make your K40 laser cutter/etcher more user-friendly and improve the output quality. It can be installed into your K40 with a minimum of fuss, and at last, you can realise your K40's potential to easily produce quality laser cuts and beautiful engravings. Instead of clunky proprietary software, you can now use any software produces G-code output. We've enhanced the popular (and free !) Inkscape so you'll be getting the most out of your laser cutter/engraver in no time without the trial and error approach.
By supporting this project, you'll not only be getting great hardware at a great price, you'll be releasing a robust G-code software solution into the open source community, so we can all benefit from further improvements. We will monitor the community feature requests, and will jump in and help out when we can. For example: include a g-code sender within the plugins.
Setting up your Gerbil's new home
Simply turn off your K40 at the powerpoint, disconnect your existing controller, and plug in your Gerbil. Grab a screwdriver to re-position the end-stop. That's the hardware done. On your PC/Mac, install Inkscape and the plugin/extension, and you're ready to go.
How does Gerbil communicate?
Gerbil connects to your PC or MAC via a USB connection.
What's so special about Gerbil?
Any laser cutter/engraver requires you to experiment with hundreds of permutations of settings and image manipulation to achieve an acceptable result with a lot of wasted material in the process. But with Gerbil, the plugins and firmware will help you create a great result first time.
For you tinkerers out there, don't worry - you can still optimize, configure and experiment with picture settings (in the movie above, F-Feedrate, S-Laser strength, Receive-Data buffering settings in the g-code sender). Gerbil engraves with 256 Grey levels in a very laser small range (2mA of 20mA range) and beyond if you want to carve the wood or work piece even deeper to make your images really pop out. Additionally, Gerbil excels at cutting with different power settings and any repeat cycles.
Is Gerbil safe?
Gerbil includes sensible features to increase the safety of your Laser Cutter. The laser is automatically turned off when the K40's carriage or motors stop moving. If you choose to install the optional pause, resume and abort buttons, you will be able to safely adjust or inspect the work piece during the cutting or engraving process.
Can it drive other Lasers?
Well depends on the hardware and how tech savvy you are. I bought this 18 year old Trotec laser (75 watt Synrad excited RF laser) for $250 on eBay (postage another 250) and removed its dead controller (size of a old pc motherboard).
Replaced the dc motors/encoders with just simple of the shelf NEMA17 stepper motors that I had laying around. The existing mechanical end stops could be re-purposed. All with all took me under 2 hours. And now I have a big massive working laser, hurrah!
What else is included?
All rewards include:
- End stop flag and 90 degree conversion bracket
- Access to the enhanced Inkscape/Gerbil software plugins
What additional accessories can I get for Gerbil?
For the best possible results, consider the 'pro-pack' reward, which includes:
- a small drag chain to feed the K40's air assist or electric fan cable
- a high quality laser lens to concentrate the laser into a smaller area, resulting in sharper engravings and improved grayscale spectrum
Where was Gerbil conceived?
began over a year ago when I purchased a Chinese K40 Laser cutter and engraver from eBay. I quickly discovered that
the Chinese proprietary software and dongle were unusable, especially as it came without instructions.
Fortunately I had some knowledge of the open source CNC motion firmware 'Grbl', and it turned out to be very suitable for controlling the K40 with some software modifications.
Well thought through open source tool-chain: Be productive, less waste!
High resolution steppers for precision cuts
16 bit PWM to perform 10 bit engraving (380 DPI picture engraving)
Keeping the laser ionized during engraving (enhances quality and expands life span of the tube)
Easy Plug-and-play solution
Also seen at
The technical development
Starting out with a basic Arduino board (which is an 'Open-source electronic prototyping platform enabling users to create interactive electronic objects') and a simple Arduino motor shield, I found it worked really well for cutting wood and acrylic but the engraving results were unsatisfactory. I realized that more resolution, shades of grey, and depth were needed for high quality engravings. Finding another Atmel processor, one with two additional 16 bit counters, allowed for a proper grey scale range in the very narrow laser power band suitable for engraving, while still allowing full power for cutting.
To be able to use the hardware enhancements, I re-wrote the raster Inkscape plugin to generate a matching high resolution raster in g-code format and configured the right settings in the controller's firmware to generate the laser output pulses. After testing 64 combinations of frequency, speed and power within the controller firmware, the winning combination of contrast, depth, grey shades and resolution for the engraving was found !
The next barrier was the wire connectivity between the machine and the controller. K40 machines use a combination of hard to find connectors. Also, there are slightly different K40 models on the market so I needed to cater for these combinations. Sourcing these rare connectors at a reasonable price was like looking for a needle in a haystack.
The next requirement was to ensure the installation process is easy for non-experts. That means swapping connectors and installing open source software like inkscape on your PC. The controller connects to PC via a regular USB cable.
Finally, I aligned the X-Y coordinate system in the K40 laser with that from Inkscape (bottom, left instead of top, left) so your work layout in Inkscape matches exactly that of the laser. This was achieved by adding an L shaped bracket (90 degree angle) to the existing end stop and a simple flag to trigger it.
What do you need to do once you receive Gerbil?
(note: the following instructions will be made available in detailed written and video form)
Safety first - turn off your K40 !
Unplug and remove your existing K40 controller board
Plug in your new Gerbil controller board
Turn the K40's Y end-stop 90 degrees and position the end stop flag
Install the Open source tool-chain (Inkscape, laser plugins, g-code sender) on your PC or MAC
Now you're ready to test - engrave a small picture and calibrate the firmware/tube power range (one parameter in Gerbil).
And you're done and can start being productive!
Not much to be extended since we have done all the development work, it's just a supply chain from here.
The team behind the Kickstarter campaign
Paul de Groot, tinkerer and crazy inventor, has a B. Sc in electronics engineering. In daily life he works as a Business Architect to solve the challenges within the Australian Health sector.
Dan Collins, mad scientist and creator of the Personal Particle Accelerator STEM kit is a Data Scientist in daily life solving complex Big data and analytical puzzles.
Riesgos y desafíos
Design risks are low since the product has been designed and successfully tested on multiple machines. Paul has had the Gerbil running on his K40 machine for one year.
Discussions with many other K40 owners indicates that all K40's use the same stepper motors and the same laser tube. Variability between K40’s appears restricted to the connectors, and two types of power supplies. The mitigation strategy is to use beta users from the Google+ K40 forum for various models before ordering and starting the production.
Production has already been tested - The supply chain risks are low because the production partner has already successfully produced good quality PCB’s and assembled units.
The production strategy is to place several batch orders, rather than a single large order. This should allow ongoing quality testing to quickly address any quality problems that arise.
Finally, the test plan is to test 100% of boards before sending to backers.
Ability to scale - our production partners are professional commercial operators, and are able to scale to large production volumes. We've established links and budgeted for a large local facility to perform testing and distribution of rewards, so that backers are not dependent on our personal time to execute these aspects.
Shipping rewards - will occur from Australia, with backers responsible for ensuring the product is suitable for their jurisdiction/locality, and if applicable, the payment of any inbound customs duty.
Timeline - we've planned a day by day schedule that integrates all our suppliers, transport, testing etc, and allowed a bunch of time for last minute delays, so we're confident that we can deliver by the time frames stated in the rewards.
Allows use of open software for improved cutting productivity. Please note:
1) this reward hardware doesn't support improved engraving unless you add an enhanced compatible Arduino controller (i.e R4)
2) an Arduino Uno is required but not included in this reward
3) Includes step sticks