£19,710
pledged of 500 £pledged of 500 £ goal
190
backers
67hours to go

All or nothing. This project will only be funded if it reaches its goal by Sun, December 16 2018 10:00 PM UTC +00:00.

£19,710
pledged of 500 £pledged of 500 £ goal
190
backers
67hours to go

All or nothing. This project will only be funded if it reaches its goal by Sun, December 16 2018 10:00 PM UTC +00:00.

About

Changelog:
-------
Stretch Goals Unlocked:
Porta Power, Energy Barrel, Power Stack, Portable Generator, Space Barrel, Space Crate, TAG Crate, Tag Container, Cube Crate, Refrigerated Crate, Smooth Crate, Secure Crate, Standard Crate, Crate Barricades
-------
Scheduled Releases:
Locust, Eagle
-------Notes:
Owners of the Efreet model from previous KS may chose the Locust or Eagle instead of the Efreet in the Dropship Bundle.
---------


Hello and welcome to our 3D Print Kickstarter.

As some of you will know we at Antenociti's Workshop are going to be substantially reducing our ranges of resin-cast vehicles over the next few months and eventually phase resin casting out altogether. 

With that long-term plan in mind, we have decided to release some of our catalogue of Sci-fi vehicles for 3D printing. 

This Kickstarter will, therefore, include a number of 3D-printable vehicles from our own GOT designs through to the USIMF designs originally done by Stephane Chasseloupe and others.

The models were designed to work for both 28mm and 15mm 'scales' with the level of detail set at a high standard without being too cluttered or overly complex.

Some designs have been converted from low-poly computer game-models, removing the textures, re-meshing and adding the detail needed for 3D printing.

So, whilst you can find some of these designs elsewhere on the Internet, the level of 3D detail on them is far lower than that on our Kickstarter models (and all of our files have been verified as "Print-ready").

The following image shows an example where the original track is a bare band and our re-work is a fully linked 3D track.

Top: "Game Ready" Mesh, Bottom: Detailed 3D Print File
Top: "Game Ready" Mesh, Bottom: Detailed 3D Print File


Our models are broken up into separate parts for ease of printing and, originally, for us to use for resin casting. This creates multi-part models, usually with a side of each part conveniently bare for attaching printing supports or similar (such as the underside of a tank hull) 

The models supplied to you will include all parts required for each vehicle/model wherein each file has been checked using Nettfabb to verify their integrity and validity for 3D printing. (You will obviously still need to set them up on your printer with appropriate settings for your scale, material and so forth)

Verified Integrity using Nettfabb
Verified Integrity using Nettfabb


We print our own models using the Form 2 and PreForm software:

Form 2 Print using PreForm Software
Form 2 Print using PreForm Software


The Form 2 is capable of high detail prints at 25-micron (but you can print at lower resolutions).

"Fresh off the printer"...
"Fresh off the printer"...

No individual part is larger than the build volume size of the Form2 which is: 145 × 145 × 175 mm or 5.7 × 5.7 × 6.9 in.

Some larger parts may have been hollowed out for you, alternatively, you can use MeshMixer to do this and/or split parts up into smaller pieces for printers like the Anycubic Photon which has a smaller build volume than the Form2 

Kickstarter Pledges:


The various 3D models are broken up into discounted bundles and then those bundles can also be discounted by grabbing the "all-in" pledges.

NOTE: This Kickstarter is solely for .stl 3D Print Files only.
There are no physical products in this Kickstarter.

Bundle Images:

 Stretch Goals:


Scheduled Releases:

                 

Risks and challenges

Risks:

The .stl files for 3D printing are already completed as we have printed the majority of these files for our own uses in the past.

All models have been validated as Print-Ready, using Nettfabb.

Delivery:

Downloadable files completed via BackerKit will be available once the Backer has registered on BackerKit and confirmed their pledges. This will be available from 14 days after the KS ends.

TERMS AND CONDITIONS

By pledging to this project, you acknowledge that the final look, materials and content of the rewards (and the project) are subject to change and may differ from what is presented while the Kickstarter project was active.

Pledging to this Kickstarter will grant you the following privileges once payment is received for models backed:

1) A license to use the Product that is non-exclusive, non-transferable and is granted only to you as a Backer.

2) Product may not be sold, given, or assigned to another person or entity in the form it is downloaded from the Kickstarter.

3) You are not permitted to use the files to 3D Print physical models for sale unless you have also purchased a Commercial License from us - contact us directly, outside of Kickstarter, for any Commercial requests.

4) All the .STL files remain the Copyright of Antenociti’s Workshop Ltd and may not be sold, given or assigned to another person or entity without individual permission from Antenociti’s Workshop Ltd. (Further Copyright Permission may also be required from the Original Artist that created the Concept design where applicable).

5) You may not use any part of the files for any purposes other than 3D printing, including the use of any parts or components from within models to create new products. (Any such use of any part of a model will render any subsequent model a derivative item and the Copyright of Antenociti’s Workshop Ltd.)

6) If you do not log in and confirm your pledge within 6 weeks of our notification via email to confirm your pledge, you agree that we have fulfilled our obligations to you in full for payment or donations received.

7) However, we may, at our discretion, refund or fulfil your pledge if you contact us and confirm your pledge after the 6-week window has elapsed.

If you do not accept these terms, please do not pledge on this project but instead wait for the general release.

Any breach of these T&Cs will render your license invalid in its entirety

Learn about accountability on Kickstarter

Questions about this project? Check out the FAQ

Support

  1. Make a pledge without a reward

    £
    About $13
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge £1 or more About $1.26

    Pick and Mix

    Pledge any amount and pick from the list of Bundles or Unlocked Add-Ons up to your pledge amount

    Less
    Estimated delivery
    88 backers
    £
    About $1.26
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Select this reward

    Pledge £150 or more About US$ 189

    All-In Early Bird

    All Bundles plus all Unlocked Stretch Goals included for Free - Limited to 50 pledges

    Less
    Estimated delivery
    Limited (1 left of 50) 49 backers
    £
    About US$ 189
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  4. Select this reward

    Pledge £200 or more About $252

    All-in

    All Bundles plus all Unlocked Stretch Goals included for Free - Limited to 50 pledges

    Less
    Estimated delivery
    Limited (55 left of 100) 45 backers
    £
    About $252
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.