Share this project

Done

Share this project

Done
An open-source, wireless, Internet of Things Greenhouse monitoring and automation system for your farm or garden.
An open-source, wireless, Internet of Things Greenhouse monitoring and automation system for your farm or garden.
449 backers pledged $47,053 to help bring this project to life.

July 21st Update

1 like

We have some pictures of the redesigned units for you.  We're just waiting on the displays to reach us to make some final measurements for the CNCing of the cases.  It has taken a little longer than expected due to delays in the sourcing of a few components.  

https://drive.google.com/file/d/0B2y-iQ-py1MJQUd0MC0xb2Y1VTREcTBYSlVfNmd1ZW5CQy1v/edit?usp=sharing https://drive.google.com/file/d/0B2y-iQ-py1MJVDI1cFdxVHVGUDMtbFBBMnJwUjNfcGdNQjFz/edit?usp=sharing https://drive.google.com/file/d/0B2y-iQ-py1MJWWVGVFJiR0lhR3MweVpScW8xRFJwVXFmMVlF/edit?usp=sharing https://drive.google.com/file/d/0B2y-iQ-py1MJY3lpT1Y4UExaWTlnc1BNTldyZFFwNzl6YVJn/edit?usp=sharing

clauskj3r likes this update.

Comments

    1. Creator Evolved Agriculture on July 22, 2014

      Hi Mike,

      You bring up a good question and something I was going to address in an upcoming update. We've actually upgraded all the "kit" backers to fully assembled units w/ cases. We did this primarily to streamline the sourcing and assembly process.

      So kit backers will get an upgrade to fully assembled units at the cost of being able to put the kit together themselves. We will still provide everything necessary to have boards made and build one on their own.

    2. Creator Mike McCarthy on July 21, 2014

      Do the backers that picked the starter kits need to wait for the cases to be CNCed? These boards look great. However, they look quite complete. What are you doing for the Starter Kit backers? Will there still be some assembly required?