Share this project

Done

Share this project

Done
Blazing Fast 802.11ac WiFi - 1.17Gb/s. Compatible with 100's of Z-Wave & ZigBee smart sensors. All in one exquisitely designed device.
Long-Range WiFi. Blazing Fast 11ac Speeds. Simple 3 minute setup. Built-in Smarthome hub. Exquisitely designed.
Long-Range WiFi. Blazing Fast 11ac Speeds. Simple 3 minute setup. Built-in Smarthome hub. Exquisitely designed.
Created by
7,606 backers pledged $855,625 to help bring this project to life.

Use this space to cheer the creator along, and talk to your fellow backers.

Have a question?

Only backers can post comments. Log In
    1. Missing avatar

      Frank Ayre
      Superbacker
      on

      I don't get responses to PM so I will try here...

      I have a problem.

      I paid for the Soap touch followed by the Indiegogo upgrade to 8.4... Imagine my disappointment when I received the touch, not with a 7" or even a 8.4" screen but the original tiny screen. What's up, and when will i get the upgraded Soap that I paid for?

    2. Missing avatar

      Thomas A. Geng, Jr. on

      Received my almond+ a few months ago, but didn't have time to set it up at that time. Now, I have set it up and found it to be easy to use. I am disappointed that there is no automation aspect to the software in the iOS app. I wasn't aware that this would be the case. I like that there is ease in use to turn on and off devices, but i would really like to put it on a timer instead of having to remember to shut it off.

      I was able to connect the GE Link bulbs to the hub, but then I found out I could only turn on/off and dim with the app. I went out and bought the Wink hub ($20 at Home Depot when I bought two GE Link bulbs), which has very intuitive and easy to use automation features. I would like to connect everything to my almond+ since it seems that it will connect to more devices, but can't at this time due to no automation. Please get the automation software up and running as soon as you can.

      Are there any plans to join IFTTT? This would also allow some low level of automation.

    3. Santos Lozano on

      Apple app update Please

    4. SECURIFI Creator on

      @Pamir - You won't be able to use the Z-Wave with US Z-Wave devices and technically it's against the law to use the EU Z-Wave frequency in the US.

    5. pamir kiraner on

      i have the Almond+ EU Sn CN14706029 - Can i use it also in USA ? Thanks .

    6. SECURIFI Creator on

      @Grazziani - Please see your PM inbox.

    7. Grazziani Colombo on

      Hello,

      I didn't receive my product or my money back yet.

      I need feedback about my situation in Brazil.

      Thanks.

    8. SECURIFI Creator on

      @Nick - Please see http://wiki.securifi.com/index.php…

      The WeMo switches uses Wi-Fi and wouldn't be connected using the Add Sensor option in the LCD UI. They would connect over Wi-Fi and requires the use of the WeMo app.

    9. Missing avatar

      Nick Brown on

      is there a list of supported sensors? I'd like to use the wemo switches but they don't seem to work with the Almond+ network, and I can't add them from the router.

    10. SECURIFI Creator on

      @Shane - Sorry to hear that, please see your PM inbox.

    11. Missing avatar

      Shane on

      I'm definitely not happy with this unit. I'd get a refund if possible. Not worth the wait and falls short of their previous efforts. My 3 year old router is still doing main duty.

    12. SECURIFI Creator on

      @Hashish - Please see your PM inbox

    13. Missing avatar

      hashish on

      Dude where is the new firmware?

    14. SECURIFI Creator on

      @Amit - We're working with our sensor partner to try to figure this issue. They've found a component issue in one PIR sensor, but beyond that we don't really know what's going on yet, but we're working with them to try to solve this.

    15. Amit Mishra on

      Door sensors, I'm sure others will chime in if they own other sensors where they see this problem.

    16. SECURIFI Creator on

      @Amit - Hopefully within the next month on Android, possibly a little bit longer for iOS. It's nearly done and it's in fact already working in the Android app, but we need to tweak things on the cloud end before we release it.

      As for the battery indication, what sensor(s) is this happening on?

    17. Santos Lozano on

      Please urgent notifications for door sensors

    18. Amit Mishra on

      Thanks, I guess I was asking about the timeline for when you expect that feature to roll out in the app. Also the low battery indication is intermittent, it goes and comes back. Right now,i don't see the warning but I'm sure it will be back in a day or two. It's flaky.

    19. SECURIFI Creator on

      Sorry for the late reply. Notifications is in firmware R069 which we released last week. However, we still have a little bit of work to do on the cloud side before we can release the new apps that support notifications.

      As for the low battery issue, we're still waiting for a reply from our sensor partner on this and we'll chase them again to see if they have any clarity in this issue. Do note that when you just add a sensor, it can report low battery for a little while, but it normally recovers within 30 minutes tops.

    20. Missing avatar

      Jeff on

      I saw the low battery message as well and changed them out and it still says the battery is low.

    21. Dash on

      @Amit Mishra
      Mine as well, just installed all 5 sensors that I bought together with the Almond+. And one of it is notifies me that the battery is running low. So I guess its battery.

    22. Amit Mishra on

      Oh another question, since I have put the batteries in the sensors, they have shown me the low battery message. Is that a software glitch you are aware of or were the batteries indeed bad from the get go?

    23. Amit Mishra on

      Any update on when Alert notifications will be rolled out for the sensors? Thanks

    24. SECURIFI Creator on

      @Farrhad - It's not something we've worked on, nor was it something that was explicitly promised at any point of the Kickstarter campaign, but we're aware that there's interest from our backers. Right now the priority is on improving the Almond+ performance and already included features before we'd start to work on something like this.

    25. Farrhad A on

      Hey, any progress with integrating Time Capsule and Almond+?

    26. SECURIFI Creator on

      @James - We released a new firmware yesterday, it doesn't fix all the issues and we'll have a beta version later this week with new a Wi-Fi driver and some other fixes, we suggest you try that version once it's available. Apologies for delivering a product that's disappointing, it was not our goal.

    27. James Gillean on

      I dislike my 3 year old DLink router but it works better and has more features than the Almond+. My Almond+ just sits in a box collecting dust. It's too horrible to give away even. If it doesn't get usable firmware in the next 6 months then it's going in the trash.

    28. SECURIFI Creator on

      @David - Please contact our support team - support@securifi.com

    29. Missing avatar

      David Meier on

      I have to say, waht a disappointing product. Is there a way to get a refund? Compared to my Ubiquiti wireless AP and my Vera Lite for Z-Wave - the Securifi Almond+ is barely half baked and completely useless.

    30. Missing avatar

      Nirav Patel on

      Hi All,

      I finally got TNT drop the additional delivery charge and only paid the custom/excise duty that was due.

      I had to send them multiple emails and then a written letter and pay the custom duty directly into their bank account.

      TNT were very slow to respond to any communication, and I tried phone, email, twitter, and letter.

    31. SECURIFI Creator on

      @Parisri - As per the PM we sent you, please contact the support team.

      @Leandro - Please contact our support team - support@securifi.com. It'll be hard to exchange the unit for you though.

      @Jeremy - Have you reset them? Press and hold the button for 10-12 seconds to reset them, then try to add them again.

    32. Daniel on

      @Jeremy, @Lenadro, @Parisri. You guys will get a faster response taking your messages to their forum. They are winding down on here.

      http://forum.securifi.com/

    33. Jeremy on

      Hello there. Thoroughly enjoying my Almond+. Its working flawlessly. However 2 of the door sensors that I received are faulty and are not connecting to the Almond+. Am I able to get replacement units?

    34. Leandro Serrão Franco on

      Good afternoon. I live in Brazil and received my almond + 3 days ago. I updated it to the latest firmware (R066) and was using normally until this morning. No more sign of the router on my smartphone. I went to see what had happened and saw that the screen was even stuck with the words securifi with a white background. I tried a hard reset with the stylus, pressing for 5 seconds as explained in the faq site, but still stuck on the same screen. After about five minutes the router restarts and begins the process again and again. The only way to reset is to disconnect from the outlet. As he does not leave the home screen I do not have access to the web version through the ip 10.10.10.254. I do not know what else I can do. I request a response from suport the earliest ... Thanks

    35. Parisri on

      The touchscreen does not work, what should I do ?

    36. SECURIFI Creator on

      @Dash - Potentially, there just isn't a product available today that we could sell globally, so this is something we're trying to solve.

    37. Dash on

      @securifi
      Are you guys going to offer Zigbee Siren and Strobe Alarm? It's hard to find Zigbee and Z-Wave products in my country... Plus online sellers that provides the same frequency that I have are only selling it locally..

    38. SECURIFI Creator on

      @Florian - You might be confusing things here. The TNT charge was never €45, it was €25 at the most, the rest would be government VAT/duties. We did indeed contact TNT, but sadly there's little we can do as they claim this is the norm in certain European countries. The only advice is to contact your local TNT office to contest the charge in addition to VAT/duties which you're legally required to pay. Just so you're aware, the Dutch post office charged exactly the same amount, so regardless how we would've sent your Almond+, you'd have to pay the same amount. In Germany many units got held up by customs once we started shipping EMS as the backers had to go and collect their packages from customs and they didn't believe the cost was only US$95. Some even got returned to us due to this. We're in a situation that makes us look bad regardless and apologizing isn't going to help the situation either. That said, unlike some other Kickstarter campaigns, none of our packages to Europe were destroyed.

    39. Florian Harr on

      About 1.5 Months ago you said you were sorry about the 45€ surcharge made by TNT to almost all of the EU backers and you were searching for a solution with them and you keep us up to date. As of today, no one of us has ever heard anything again and I wouldn't wonder if you didn't even bother with TNT ... Best Kickstarter ever. Great guys, just a year delay and lots of great contact with you.

    40. Missing avatar

      Mark Amaro on

      Anyone wall mount the almond? How did you run power for it?

    41. Rocco Leach on

      I had some issues with my VoIP NETTALK and my sprint AIRAVE micro tower., after an email I got a prompt call back. We scheduled for the next day and I was dimly pessimistic, as most tech support either reads a script or has a few days training, and I feel I know more already then they can tell me. Not the case. It seemed like I talked to an actual engineer who seemed genuinely interested in finding a way to efficiently resolve my problem. Amazing and keep up the good work. I won't let anyone I know waste money on any other router.

    42. SECURIFI Creator on

      @Martin - Apologies for scaring you, but we only made a single design for the packaging to keep things simple.

    43. Martin Nygaard on

      Received mine today. Hate the danish customs, saying no documentation, even when the value is on the package. Oh well setting the beast up now.
      Awesome packaging and everything, was a bit whoa I order the white, not the black until I saw the white dot on the side �

    44. SECURIFI Creator on

      @Rene - The Wi-Fi password can be found it you tap on Wireless Settings in the LCD UI of the Almond+.

    45. Rene Burema on

      I've got mine!
      I'm connected bbbbbut can't connect to WIFI by Iphone
      WIficode is enabled. What to do?

    46. Farrhad A on

      @Securifi Got it, thanks for the quick response!

    47. Farrhad A on

      Hi, Mumbai customs *urgently* requires an invoice / proof of value. Have mailed you regarding the same. Their communication took a while to get to me... have only 3 days to claim my Almond :( Please help!

    48. Missing avatar

      Gary Williams on

      Royal Mail/Parcel Force, will for the majority of imported items hold it until customs have confirmed any custom tax that need to be paid, they will then pay the tax on your behalf and will then ask you pay this plus the handling fee, before the item is delivered
      Royal mail have a handling fee of £8 plus sometimes a local holding fee, Parcel force have a fee of £13.

      TNT should have followed the same process, however they often don’t and deliver items, then they receive the customs instructions for tax due and then forward them to you. They will also include a handling fee of £15.
      If TNT have delivered the item, then you could contact them and say that you are prepared to pay the tax, but not the handling fee. It is vital you pay the tax, TNT would not have paid it on your behalf and it will not be long before you are chased by HMRC (would could result in extra charges from them). As TNT have delivered the item already, they are not in a position to get the handling fee from you and will often settle for you paying the tax only.

    49. SECURIFI Creator on

      @Nirav - Had we know, we would've, but we weren't told by TNT, so it's hard to inform about something we're not aware of in the first place. We're really sorry about all of this, but Parcelforce is charging similar money, so regardless of which way we'd shipped to the UK, there would've been a fee that we weren't aware of outside of the VAT. Please keep in mind that we're a small company and we're not a logistics company.

    50. Missing avatar

      Nirav Patel on

      Hi I just called TNT, after a long wait in the phone they said that the additional charge was standard for all their customers where they have had to handle custom charges for.

      I asked them why I wasn't told about the charge when the item was delivered and they said the drivers wouldn't know there was a charge until after customs notified TNT. I asked them why this charge wasn't made clear prior to delivery and they said the vendor (Securifi) should have explained the additional charge not TNT.

      They gave me the email address(customsinvoiceinquiriesuk@tnt.co.uk) to write to, so I can dispute the charge which I will be. I also said I would be happy to pay the £11.14 that was due to HMRC but they said I'd have to email them first to register a dispute or they would take the full amount.

      This is not a good situation and in future Securifi should notify us of the administration fee charged by their shipping company for international deliveries.

Show older comments