Lab-Box - Production Update March
here we are with our usual monthly update.
We can finally say that we are approaching the final steps of this project. We have almost finished production... Read more
Lab-Box - Production Update February
Factories in China are now open and back at working at full capacity. As you can see in the video, we are proceeding with mass production and assembling... Read more
Lab-Box Production Update - January
First of all, we apologise for not posting the awaited update over the holidays. Over the past few weeks, certain technical matters needed to be thoroughly attended to... Read more
Lab-Box Production Update - December
throughout the past few weeks, our team has overseen works at the factory to organise production. After checking on every single piece and writing an important document on... Read more
Lab-Box Production Update - November #1
we are happy to introduce you to the packaging design and the final draft of the instructions manual for Lab-Box.
As the mass production of Lab-Box moves along,... Read more
Lab-Box Production Update - October
we are confirming that the work on the moulds has been completed and we are now starting production of all pieces. Next week, we will be back in... Read more
Lab-Box Production Update - September/2 + Photokina
In the past few weeks, we worked at the factory to check and test all the moulds. We made some minor adjustments to thickness and tolerance of some... Read more
Lab-Box Production Update - September
we apologise for the slight delay in posting this update; our staff has been travelling to the factories where the Lab-Box parts are being produced.
As anticipated, the... Read more
Lab-Box - July Production Update
We can finally share with you the first pictures of the final packaging design: we are currently producing the first prototypes and setting up the production.
At the... Read more
Lab-Box - June Production Update
The mould production continues and we are following every step of the process to make sure it goes smoothly. This is a slightly long but very important phase,... Read more
Lab-Box - May Production Update
at this moment and along the next few weeks, we will be following the mould-making process. The finalisation phase of the various pieces has been long, as we... Read more
Lab-Box - April Production Update
We are gradually entering the production phase and we have widened our staff, both on the communications and on the technical side, so to maximise efficiency during this... Read more
Lab-Box - March Production Update
Here we are with a new update.
Last time, we mentioned a few issues responsible for slowing down the project and the timeline.
Throughout these weeks we worked... Read more
Lab-Box - February Production Update
we’re getting closer and closer to the realisation of Lab-Box’s components.
We have also finished testing the latest changes - there have been several things we had... Read more
Lab-Box Update - Final details and production timeline
we keep on working and we are getting closer and closer to starting the production of Lab-Box. First, we want to show you some pictures in order... Read more
Lab-Box Update - News, product improvement and new webshop
as announced, we here share with you some of the things we have been working on over the last few weeks in order to optimize and improve... Read more
Lab-Box Update - September - New Timeline
as we mentioned in our latest updates on the Kickstarter page, the timeline of the project has changed.
The incredible success of the project had dramatically increased the... Read more
Lab-Box Update - August
we are almost finished with the final designs of all Lab-Box components! In September, we'll start producing the molds that will be used to print all the... Read more
Lab-Box Production Update
although Lab-Box looks like a simple box, it is actually a rather complex object, made up of many pieces. The design phase of the moulds is very... Read more
Lab-Box Update and Survey Reminder
the engines are running and we are now focusing on the production of Lab-Box’s different elements, updating and fine-tuning all the moulds and prototypes. Every single detail matters! ... Read more
Lab-Box - Work in progress
the project is set in motion! We are working hard on the moves necessary to prepare the production and fabrication of Lab-Box.
At the moment, we... Read more
Kickstarter Campaign News!
in these past weeks following the end of the campaign, we have started working on the organization of the production of Lab-Box.
As you can imagine, this amazing... Read more
We've made it! LAB-BOX will become a reality!
Thanks for this amazing campaign which exceeded our best expectations!
Each one of the 4791 amazing individuals who believed in us and supported this project has helped in... Read more
Last 3hrs on Kickstarter
there are only three hours lefton our campaign and we still cannot believe that this product is about to become a reality thanks to every single one... Read more
We have cleared our FIFTH stretch goal: the thermometer is in!
We only have 24 hrs left on the campaign and, thanks to all of you who have chosen to back our project, we just reached and surpassed 620k! So now... Read more
slowly but surely the campaign keeps growing and we just hit 600k!!!
That is UNBELIEVABLE and we cannot believe how many people are giving even beyond their pledge just... Read more
New stretch goal: built-in thermometer!
You asked for it...you got it!
We thought there was little room of improvement for our amazing LAB-BOX: wink: but look what we have in store for you!
The LAB-BOX... Read more
Fourth stretch goal cleared!
And...would you believe it?!....another stretch goal cleared!
550,000€ and a new perk for all you amazing backers!
So now get ready for another major announcement and let's make it happen!... Read more
we've made it to HALF A MILLION €!
That calls for a full million THANK YOUS from the LAB-BOX team to all our backers: everyone of you is helping... Read more
New subtitles available!
Hello everyone! Our introductory video is now available with subtitles in English, Italian, Spanish, French and German...so get on sharing for everyone to discover LAB-BOX today!
We also would... Read more
Here we are with our fourth stretch goal!
The project keeps growing, thanks to your support!
So today we are proud to present our fourth stretch goal: the new Washing Funnel, that will allow you to rinse... Read more
New Twin Pack Pledge!
Dear analog photographers,
Thank you for your help and support in improving this project even further. Your feedbacks allowed us to add two new pledges:
Now you will also be... Read more
Third stretch goal cleared!
The LAB-BOX backers community keeps growing, and we have now reached our third stretch goal, so all our backers will also receive an extra reel with each tank!
Thank you... Read more
We got more features and freebies coming to you!
Dear analog photographers,
First two Stretch Goals cleared!
Thanks to your support, we have cleared the color choice stretch goal and the additional crank for agitation!
We have been incredibly busy over the last few hours trying to... Read more
Thanks to all our backers !
Thanks to all our backers and all those that believed in this amazing project!
We are busy replying to all the messages you are sending! We will keep posting... Read more