Funding Unsuccessful This project’s funding goal was not reached on .
Photo-main
Play
00:00
00:00

I designed the SAIR & DAIR robot parts so home hobbyists can download parts to 3D plastic print and build their own robots ... FREE!

The purpose of this project is make sure I'm posting good robot part and kit files available FREE for downloading to help move the "Robot Revolution" forward a little bit faster ... and hopefully, more artfully too.

     I've held off posting the part files for the SAIR and DAIR robots because I need to confirm that all the parts do fit correctly so I can post the files with full confidence the FREE downloaded part files build a working robot kit. 

     The SAIR & DAIR robots design is based on typical packing, sorting and shifting ... industrial robots but these are about 60cm tall (2' tall) and are home hobbyist versions.  

     Both the SAIR & DAIR robots are designed to use standard hobby servo motors.  It is the builders choice to select the servos to be used in their robot.  I set the weakest point on the upper arm so that if the robot attempts to lift something beyond the normal strength of the other parts the easiest part to replace is what breaks ... that small plastic tube arm piece. 

As I am a big fan of the PP3DP UP! printer I have been designing parts for that printer but these part files can also be printed on almost any 3D Plastic Printer (e.g., MakerBot, Thing-o-Matic, Mandel etc...)   Having my own 3D Plastic Printer allows me to better learn to design for the 3D Plastic Printers and to make more 3D Plastic part files available on my website.  

http://www.opecofthewest.com/DAIR-10.html

Find FREE robot part and kit files here:
http://www.opecofthewest.com/RoboPartsList.html

What can you do with a DAIR?

Did I mention I write my own music too?

BTW, I do hope projects where people download and use my part designs become OpenSource and are freely shared among'st home hobbyists.  

FAQ

Have a question? If the info above doesn't help, you can ask the project creator directly.

Ask a question
4
Backers
$2,265
pledged of $4,500 goal
0
seconds to go
Billybotavatar400.medium

See full bio

  • Pledge $1 or more
    You selected

    1 backer

    You will have the pride in knowing that you took part in helping Home Hobbyist get FREE part files for building robots and to accelerate Consumer Robot revolution. Download your FREE robot part files from; http://www.OPECoftheWest.com/

    Estimated delivery:
  • Pledge $25 or more
    You selected

    0 backers Limited (10 left of 10)

    You are helping to make a difference and so your name will be on the donation list posted online. I will also send anybody who requests a 2-piece pyramid pocket puzzle. Download your FREE robot part files from: http://www.OPECoftheWest.com/

    Estimated delivery:
  • Pledge $50 or more
    You selected

    0 backers Limited (100 left of 100)

    I will immortalize your name on a RoboToons robot cartoon and also send those that provide a mailing address and request one, a 2-piece pyramid pocket puzzle. Download your FREE robot part files from: http://www.OPECoftheWest.com/

    Estimated delivery:
  • Pledge $100 or more
    You selected

    0 backers Limited (100 left of 100)

    For those on this list will receive an email notification as the parts are ready for download! Please remember to send me your info to receive this added benefit! I will also send anybody who provide an email address will be immortalized in a special RoboToons robot cartoon using their face and/or name ... or for those that request a 2-piece pyramid pocket puzzle. http://www.brainless.org/RoboToons/ Download your FREE robot part files from: http://www.OPECoftheWest.com/

    Estimated delivery:
  • Pledge $500 or more
    You selected

    0 backers Limited (10 left of 10)

    You get all the above but will also be listed as a significant supporter on the OPEC of the West SAIR/DAIR web-page. I will also send you a RoboToons cartoon T-Shirt ... the design of your choice. All persons that donate $1,000 will get the printed robot parts to build their own DAIR robot and exclusive BallBot1 Prototype body and wheel parts needed to build their own working BallBot1 Model P.

    Estimated delivery:
  • Pledge $1,000 or more
    You selected

    0 backers Limited (5 left of 5)

    You get all the above but will also be listed as a significant supporter on the OPEC of the West SAIR/DAIR web-page, have your name engraved on a plaque on or near my desk and I will also send you a custom RoboToons cartoon T-Shirt with your name ... or the basic design of your choice. All persons that donate $1,000 will get the printed robot parts to build their own DAIR robot and exclusive BallBot1 Prototype body and wheel parts, µController and other parts needed to build their own working BallBot1 Model P.

    Estimated delivery:
Funding period

- (30 days)