Share this project

Done

Share this project

Done
This is the first high resolution custom Tile Set for Terraforming Mars. Printed with DLP 3D printers and shiped all over the world.
681 backers pledged €42,355 to help bring this project to life.
spmarcil, Johannes Grashorn, and 5 more people like this update.

Comments

Only backers can post comments. Log In
    1. Markus Geiger 2-time creator
      Superbacker
      on

      One little opdate about the overlay and the 10x multiplier fields.
      I just take a lookg and see I cannot just cut them inside the actuall design. The hole thing have to be bigger as the printed status board and my design to cover it. That will effect the calculation for weight price and all a bit but because I will go for acryl by laser cut if the orders are big enough I dont take care about that thing now. If the extra orders are done and I maybe already have a laser cutter I weill redesign anyway and then it will be a little thing to give you the option between a normal version and a bit bigger version with the 10x multipliers. I will keep it in mind.

    2. Markus Geiger 2-time creator
      Superbacker
      on

      Hi Jason,
      thank you now I understand. I will take care about that +10 spots and add them at the overlay design. No Problem!

    3. Jason Holmes on

      Sorry Markus, you are correct you don't cover anything up. I just have always played with overlays which has a +10 Multiplier spots off to the side of the -5 through +10 spots. I would have attached a picture if I could but maybe a link to one that I have used before would help. Maybe this will help with some inspiration...
      https://boardgamegeek.com/boardgameaccessory/220036/terraforming-mars-eightbitwood-player-mat-overlay

    4. Markus Geiger 2-time creator
      Superbacker
      on

      I forget to say I take care the card sleeves topic. If you use sleeves the cards going to be bigger. But the card boxes and card stands will work in both cases.

    5. Markus Geiger 2-time creator
      Superbacker
      on

      Hello Jason,
      thank you a lot for your feedback. About your questions:
      1) About that it not cover the money multiplier if surpass 10. I dont understand exactly what do you mean in detail. Can you please explain so I can take care of? I do not cover any printed text on the board, and I thought its possible to do everything needed with it.
      2) I planed to have a overstaying edge at the backside so the printed board cannot move if you lay the overlay above. But yes its possible too realize a slide variation too but I have to print it in two parts and it will be a bit more expense. At the moment I more hope we get enough overlay orders so I can use Acryl Glas and cut it out there. This way it would look even bether. Lets see what way we go if Kickstarter ends on thursday. For sure all of you will be able to get nice overlays.

    6. Jason Holmes on

      Sorry for second post but I forgot about the deck holder, are you considering people who sleeve their cards? You prototype send to have the stock cards which show allot wear after many play through (and anyone who is willing to pay for this kinda of upgrade probably plays it allot)

    7. Jason Holmes on

      Thanks for the update, love the bowl idea. As for the overlay I don't like that it covers the money multiplier for when you surpass 10. Other than that it looks very clean, would suggest adding the option to slide the player board into overlay if possible. Keep up the good work!

    8. Markus Geiger 2-time creator
      Superbacker
      on

      Thank you for your feedback, all of you!
      I love Acryl too and guess with the right engraving etc. it would look amazing. And I guess we get enough orders to upgrade the Overlay made with PLA to a Acryl but this depending to you finally. As soon as I see we have enough budget for this I go to buy an CO2 laser cutter and inform all of you giving you the option to take the Acryl version of it.
      And Im glad you like my update, this time I worked hard again to create a lot of needfull things. Today I will show some amazing new stretch goals you will see.

    9. Monica Elida Forssell
      Superbacker
      on

      I have already gotten some overlays, which rocks my world! But these are looking awesome too. Right up the alley for the theme.

    10. Andreas B. on

      Acryl overlay would rock

    11. Missing avatar

      Richard Hanks on

      Fantastic update! The add-ons look really great. Thanks Markus.