Please have a look on demo.ednme.com. We reworked the web interface completely.
We are currently completing translations. Web service for emdo cloud is still in progress.
Manuals and more
Find below the first draft of the manuals with some screen shots. One or the other chapter is not formatted correctly or text not revised. But there is already lot... Read more
There is one last missing feature on the S0 output left that we will implement this week. After final test we will ship the boards hopefully at the end of... Read more
EMDO on rails
First prototypes of the EMDO in DIN-Rail enclosure. The device is only about 20% larger then a credit card.
Instead of the D0 port it has a second RS485 port.... Read more
I learned today, that the boiler temperature in our house decreases by 6°C per shower. This was measured by the EMDO / EGO smart heater over modbus TCP.
The firmware... Read more
MQTT based webservice
We have first prototype of MQTT based webservice running with EMDO. We will provide public server, once the webservice has full functionality.
Sources are available at https://github.com/swissembedded/em
We are still working on the first firmware release. All baker devices as been successfully programmed with beta version of the firmware and fully hardware tested. We will start shipping... Read more
Blog Basic programming part 2
In this blog we explain how simple it is to read the current power consumption or power production from an engergy meter S0 output into the EMDO. An example is... Read more
Blog Basic programming part 1
Short introduction into Basic programming with if..then, for..next, while..loop. No rocket science...
Test procedures for PCB production
The EMDO PCB have been assembled and the test adapters are ready.
We are still working to finalize test procedures. We learned that the USB to RS485 test dongles from... Read more
A short article in German getting started with the EMDO.
We are about to test the new graphs with live view and new editor layout for the EMDO. We added live view that shows current data directly from Basic variables,... Read more
New enclosure front plate
With the radio based expansion boards, we simulated that the metal front plate of the EMDO device has a capacitive coupling to the radio antenna. We well adjusted the antenna... Read more
First prototypes of the Wireless M-Bus expansion board are now assembled. We are going to test the module with our new test installation of the Letrika Sol Micro Inverters in... Read more
Board test adapter for production
Testing hardware after PCB production is an important production step in order to ensure production quality. The test hardware is now finished. From the hardware side we are now ready... Read more
We integrated the UPNP protocol into the EMDO. This simplifies the configuration of the EMDO in the home network, but is also an important step forward the integration of the... Read more
MCU upgrade, WM-Bus expansion board, test adapter, enclosure production
At the end of february we decided to upgrade the EMDO MCU. We had about 45k memory left for programs. This would have been enough for larger BASIC programs, but... Read more
We plan to put an EMDO online for testing at the end of the month. If anybody is interested in beta testing and giving us feedback, pls let us know.
Testing software components
There are still software components under development. But we are about to test one software component after the other. For example we transfered 182Mb of data over the RS485 at... Read more
CE and FCC certification
Today I spend the day in a EMC lab in Zurich. We successfully passed all the required tests for CE and FCC mark for the EMDO.
The short movie shows... Read more
We did it
A big thank you to everybody helping to achieve the funding!
We will keep you updated about the progress we make in the next couple of weeks.
LoRa Wan Demo with LoRa Expansion Board
Two EMDO devices sending ping pong messages over LoRa Wan using Microchip RN2483 chipset. The source code is available at github.
EnOcean Demo with Enocean Expansion Board
Small demonstration of the EMDO switching EnOcean devices over the EnOcean expansion board.Source Code available at github.
A big thank you to everybody supporting the project. Keep on going, still almost three weeks to go...
New EMDO boards with expansion connector assembled
Finally assembled the new EMDO boards with expansion connector.
EMDO expansion boards radio module prototypes
The first prototypes for the new expansion connectors have been assembled. The precertified radio modules with small helical pcb antenna on the PCB.
For the convenience we wrote a little android app which acts as a wrapper for the HTTP server integrated into the EMDO.
Most routers / firewalls support dynamic DNS which... Read more
Building Battery Solution with EMDO
It is quite some work to bring 800kg of lead acid batteries about 50m up the stairs. Maybe some of you are also interested in such a workout, I uploaded... Read more
EMDO expansion connector
There have been several requests about adding LoRaWAN and EnOcean smart home to the EMDO. For this reason we will add an expansion connector to the device which will allow... Read more
The First Week
Since launch we have created more applications on github (please see the link below). Your support has been great and we are excited that we have received the interest we have... Read more