The mPrinter is a small thermal printer that prints dynamic snippets of information we call mPrints.
Update August 30th: If we hit $75,000 in pledges, we'll replace the regular LED with a controllable RGB LED. In addition to normal status like network connected, print waiting, et cetera, mPrints will be able to set the RGB color.
What is it?
We have an iOS application for iPhone, iPods, and iPads that allows you to utilize the quick print functionality, mange your mPrints, and has a fun "doodle" feature.
Update: We've had a lot of inquires about an Android version. Based on popular demand, we now plan to have an Android version available at launch.
We plan to have browser plugins for site scraping, dashboard widgets, and more.
We are going to make the schematics, board layouts, and firmware open source.
How does it work?
USB-only mPrinters connect to your computer (Mac and Windows at launch) via USB. WiFi mPrinters contain a small built-in web server and connect to your network (or adhoc device) via WiFi. You can configure your WiFi mPrinter via its web interface, or USB.
All mPrinter models have built-in charging circuitry and a battery compartment for an optional LiPo battery, which will be available for purchase separately after we have evaluated suppliers.
Currently, we are utilizing 2" wide print heads. If we hit $20,000 or more in funding, we will automatically upgrade all orders and models to an extra-wide 3" print head.
For dynamic mPrints, we utilize a sandboxed Node.js environment. If you enable outside interaction, each mPrint is assigned a URL that may be used by outside services to interface with the mPrint. You can make mPrints private, or share them with the community. You can hide the source code, or make it available to others.
We have developed prototypes based on Arduino, bare Atmel AVRs, and Microchip PIC32 and PIC24F microcontrollers. The WiFi module is made by Microchip. We are going to evaluate community feedback prior to making the final platform choice.
We have tested off-the-shelf serial print heads, as well as sourced samples from possible large-quantity suppliers in China.
How and where will it be made?
The thermal print head, parts of the control board, and the circuit board will be provided by the same suppliers in China that we have gotten prototype parts from. Currently, we plan to use a local Dallas-based USA supplier for the injection molded cases. All electronics components will be sourced from a US-based distributor, with parts made in a variety of countries including the US and China.
We are making the mPrinter as small as possible, while still holding a reasonable amount of paper. Our print heads were specifically selected for their voltage and current specifications in order to allow for battery power. As noted above, all mPrinters will include charging circuitry and a battery compartment for an optional LiPo battery.
Combined with an adhoc network, battery power would allow you to use your mPrinter with a device such as an iPhone nearly anywhere.
A thermal printer? Don't those print receipts?
Indeed they do. However, the underlying hardware is much more capable than just printing out a few numbers. The printhead we are using in the mPrinter has over 200 dpi, a resolution that gives crisp, clear text and the possibility of halftone black-and-white graphics.
Who's making it?
My name is Andy Muldowney. I'm a technology veteran with a wide range of experience - including hardware design, web programming, and iOS development. I enjoy projects that encompass a wide range of my skills, and this certainly fits the bill.
I currently serve as the CTO of a large VoIP company where I have led development of applications for mobile, web, and desktop platforms in use by over 4,000,000 people across the globe.
How far along are you?
Several prototypes have been made and are functioning. The website is largely complete. The bulk of our timeline involves sourcing components, manufacturing the circuit boards, and getting the custom cases made.
Will the mPrinter work with...?
In theory, the mPrinter can be made to work with nearly anything. We are actively seeking specific launch partners and are open to any suggestions. If you think your product or service could benefit from the mPrinter, please contact us for deep integration possibilities.
Yes - the thermal paper it uses is stocked at almost any office store, and big box chains like Walmart. If we reach the $20,000 goal and move to the 3" head, we may have custom rolls made that aren't quite as thick in order to keep the physical size of the printer down. However, even if we do that - you can still use standard 3" paper without purchasing anything special from us, and just remove some to make it fit properly into the case.
Yes, the printer will support all languages. At it's most basic level, it's printing out HTML - so anything that can be shown on a webpage can be printed.
Absolutely! We plan to, at a minimum, make AC adapter options available for Europe, the UK, and possibly Australia. Even if we don't have a special AC adapter for you, the cord will be swappable and is a standard part.
Yes, the WiFi version has both USB and WiFi connectivity.
Unfortunately, no. USB does not provide enough current for the print head. We are going to do our best to make USB charge the optional battery (coming at a later date).
seconds to go
- First created · 0 backed
- Has not connected Facebook
Pledge $10 or moreYou selected
Every few dollars helps! Once available, get a full PDF schematic and specifications for the mPrinter via email.Estimated delivery:
Pledge $25 or moreYou selected
Get an mPrinter sticker, and a 140-character or less message printed by one of our mPrinters mailed to you. We'll also snap a photo of your printout along with your username on our "wall of gratitude" on our website.Estimated delivery:
Pledge $80 or moreYou selected
Standard - Get one USB-only mPrinter. NOTE: This option DOES NOT include WiFi. Includes a roll of paper to get you started, and access to our website to generate and host mPrints. Add $20 for international shipping.Estimated delivery:
Pledge $100 or moreYou selected
100 backers All gone!
Early Bird - Get one WiFi mPrinter. Includes a roll of paper to get you started, and access to our website to generate and host mPrints. Save $20 by being an early supporter. Add $20 for international shipping.Estimated delivery:
Pledge $125 or moreYou selected
Standard - Get one WiFi mPrinter. Includes a roll of paper to get you started, and access to our website to generate and host mPrints. Add $20 for international shipping.Estimated delivery:
Pledge $250 or moreYou selected
Standard x2 - Get two WiFi mPrinters. Each one includes a roll of paper to get you started, and access to our website to generate and host mPrints. Add $40 for international shipping.Estimated delivery:
Pledge $400 or moreYou selected
5 backers Limited (95 left of 100)
Developer Bundle. Get one WiFi mPrinter, three rolls of paper, and access to our website before anyone else. Help by making recommendations and providing us feedback, and in return, you get to help mold the available modules and features. We'll have a private forum for feedback and suggestions throughout the testing process. Add $20 for international shipping.Estimated delivery:
Pledge $1,000 or moreYou selected
Bleeding Edge. Get one prototype WiFi mPrinter and all of the above in the developer bundle - but get it all sooner. As soon as we have our 3D-printed case prototypes, you'll get your mPrinter. You'll have a direct line to give us your feedback throughout the process.Estimated delivery:
Pledge $2,500 or moreYou selected
Major Donor. In addition to everything in the "Bleeding Edge" reward, get listed in the test mPrint hardcoded in the mPrint firmware.Estimated delivery:
- (30 days)