€1,692
pledged of 30.000 €pledged of 30.000 € goal
18
backers
0seconds to go
Funding Unsuccessful
The project's funding goal was not reached on Thu, June 14 2018 5:00 PM UTC +00:00
SPIN SHIELDBy SPIN SHIELD
First created
SPIN SHIELDBy SPIN SHIELD
First created
€1,692
pledged of 30.000 €pledged of 30.000 € goal
18
backers
0seconds to go
Funding Unsuccessful
The project's funding goal was not reached on Thu, June 14 2018 5:00 PM UTC +00:00

About

English version below

Les champions parlent de SPIN SHIELD

Pourquoi avoir choisi KickStarter

LA galère 

  • Vous avez gâché votre course ou votre sortie bike en pinçant.
  • La rage de perdre l’air en appui et de déjanter.
  • La haine d’avoir abimé votre nouvelle jante flambant neuve.

LA solution : Spin Shield pour pneu tubeless

  • Pourquoi choisir Spin Shield? C’est un composite fibre/polyurétane 3X fois plus efficace, contre les pincements, que toutes les solutions en mousse sur le marché.
  • Avec Spin Shield impossible de déjanter même dégonflé.
  • Avec Spin Shield vous allez pouvoir rouler à très basse pression pour améliorer votre grip et votre confort de pilotage sans pincer.
  • Le système de serrage turn & ride vous permettra de rouler à plat même avec un pneu déchiré. Vous êtes sûrs de franchir la ligne d’arrivée.

AVANTAGES TECHNOLOGIQUES

  • POIDS 20% plus léger que les actuelles générations d’insert
  • LONGÉVITÉ le composite fibre/polyuréthane présente une exceptionnelle resistance à la perforation
  • FIABILITÉ en course et en loisir 

Montez vos pneus sans transpirer - Le gamin l'a fait...

    Spin Shield, le premier système anti-pincement et anti-déjantage breveté. Spin Shield se serre depuis l'extérieur une fois le pneu clipsé. Jamais un tel compromis efficacité / facilité de montage n'avais été atteint.

3X plus de durée de vie (VS mousses)

   Les matériaux de haute technologie, choisis sans compromis de prix, augmentent la durée de vie de Spin Shield par 3X par rapport aux mousses.

    Investissez dans un produit durable.

LE PNEU : PREMIÈRE DES SUSPENSIONS

    Avant de faire préparer vos suspensions, dégonflez vos pneus sans craindre les pincements grâce à Spin Shield.

    Ridez à basse pression avec Spin Shield pour augmenter votre grip, votre vitesse et votre confort de pilotage.

 

Si tu veux sentir le Spin Effect !

    COMMANDE TON SPIN SHIELD :-)

Les contributions (commandes) en tubeless

Les contributions (commandes) en chambre à air

    Modèle uniquement pour chambre à air permettant de rouler à basse pression sans pincer et sans déjantager, mais pas de finir un run à plat.

    Spin Shield le choix des meilleurs pilotes mondiaux déjà sur les podiums

On en parle dans la presse

 SPIN SHIELD en ACTION !

 FOLLOW US

     Merci pour votre participation :-D

 FaceBook - Instagram - YouTube - Spin-Shield.com

 ENGLISH version : More infos for PRO and ADDICTS

    No foam can resist to pinching. So we created a new composite fiber/polyurethane. This material opens a new horizon in tire industry.

    More than 400kg on a confetti surface could destroy your tires. Thanks to synergie of heavy load distribution material and a rigid core Spin Shield has removed the nightmare of snake bite.

    Never such a material so slim and so light has been able to avoid pinchings with this level of efficiency.

  Ride confident with less pressure, Spin shield rigidify the tire side walls and locks the beads. No more air loss and beads unseating.

     Spin Shield go beyond the prototype stage. Race after race, this innovation used on MTB downhill and Enduro WS world cups by Loris VERGIER, Julie DUVERT and Adrien DAILLY has demonstrated its efficiency. It also equips Nicolas Vouilloz's ebike. These champions 100% involved in product development are now Spin addicted. So, if you too, want to test the Spin effects, it’s time to pre-order.

    All together they total 12 world championship titles, more than 30 world cup podiums and 60 victories in competitions all around the planet. Their wish is to develop the best weapons as possible for riding and winning.

Team leader / Founder and creator

     William GENOVESE, 30 years old - Genius of the technique, magician of the cycle, his passion pushes him to highlight Spin Shield.

Support team / Pro riders

    Julie DUVERT, 21 years old - With a lovely smile. Her exceptional talent explodes chronos! A worker without limits, ready for everything to live her passion.

    Nicolas VOUILLOZ, 42 years old - The supercomputer. MTB has nos secrets for him : speed, grip, comfort, lines, ergonomy. With his ten fingers he can turn a moped into a war machine, and moreover he's so humble that he doesn't remenber how many world championship he has won.

    Adrien DAILLY, 22 years old - An extremly good mechanics, multiple enduro MTB champion, racer sets his bike like no one else... nothing is secret for him.

    Loris VERGIER, 22 years old - young prodigy of downhill, his seventh sense gets him fast like a rocket i.e. quickly and surely. Multi-skilled like a Swiss army knife, he is at ease on any terrain : fast, technical, steep, aerial everything works out for him.

   After benchmarking over 30 different materials, spent several months making prototypes to test the most efficient combinations and perform over 600 km on trails as much rough than varied... We are now able to offer you a new efficient product tested and approved by champions.

     With Spin Shield in your tire, no need to get around sharp pebbles! You will ride with lighter tires without fearing pinching and sidewalls flexion. With Spin Shield you will ride faster! The full tire travel is used to erase the uneven ground and its weight of just 215 grams, concentrated around the rim, reduces inertia. (v / s foams that fill the tires).

    Spin Shield, the first patented anti-pinch system that locks the beads on seats and that tighten from the outside once the tire is in place. Spin Shield offers the best compromise between efficiency and ease of assembly.

     Spin Shield fits exactly the width between hooks to lock beads in their seats without precedent. Tested in the most extreme conditions by world chiompions , Spin Shield never showed a single flaw!

REMINDER: On a bike all the elements (wheels, suspensions, peripherals, etc.) have a role in transferring energy between the rider and the track. Improving performance is optimizing these transfers.

    In MTB, lowering tire pressure absorbs the energy returned by pebbles and roots, and increases the ground contact area to get more grip.

    Let go of the pressure! Watch the sharp pebbles, Spin Shield will do the rest! Spin Shield will save you your brake pads and increase your adrenaline dose!

    Don't be scared to invest in a new pair of high-end wheels. Spin Shield will perfectly ensure their protection thanks to its rigid core. Adding 215 grams of Spin Shield to your wheels and transforming your bike with lighter tires and wheels. Reduce the mass in rotation, it is to roll faster without additional effort ... and without the risk of pinching!

    "Do not deflate anymore, ride FULL GAS! "

FaceBook - Instagram - YouTube - Spin-Shield.com

What pressure should I inflate? With Spin Shield ride at your usual pressure, however we advise you to try 0.2 bars less without worry about snake bite to find your compromise between speed / grip / comfort that suits you. You can refer to the inflation chart in the chapter "Are you under pressure" bellow or in the instructions supplied with your product.

If I tear the tire ... what do I do? As usual ! you disassemble, remove the valve and put an inner tube. Spin Shield remains in tires to continue to protect you. What is the life time of the product? Spin Shield won't let you down! We did not notice any wear limiting the life of the product to date.

With which Sealant, Spin Shield is compatible ? We advise you to use Notube. It is the only product to remain liquid in the long term and which stays 100% efficient against classic punctures. Combining Spin Shield and NoTube is more insurance to get back home!

Should I change my valve? Yes, Spin Shield comes with a pre-mounted valve on the system. You only need to remove your existing valve to install your new Spin Shield.

Risks and challenges

Our main focus is on producing a high quality product that reaches our fans as soon as possible.

QUALITY MANAGEMENT

We have worked hard to design a great innovative product, tested and used by champions, and want to make sure that all of our production parts are of the highest quality.

SCHEDULE

We have an experienced knowledge of manufacturing process, so we know what steps are involved and how long they typically take. Our experiences have also taught us how best to manage suppliers to minimize delays.

MANUFACTURABILITY

All Spin Shield products – are not just prototypes. Our products are designed for manufacturing . Ready to be turned into mass production parts.

Learn about accountability on Kickstarter

Questions about this project? Check out the FAQ

Support

  1. Reward no longer available

    Pledge €10 or more About $11

    Supporters PASS and friends

    Be informed in live of the advance of the project.

    Less
    Estimated delivery
    Reward no longer available 1 backer
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Reward no longer available

    Pledge €79 or more About $89

    First delivery in June

    Community PACK

    Pre-order tube-type SPIN SHIELD

    Spin Shield tube-type cannot be used in tubeless. Tube-type model is not sealent proof!

    We'll contact you after the campaign to provide you the right dimension.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Reward no longer available 1 backer
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Reward no longer available

    Pledge €79 or more About $89

    Seconde delivery in July

    Solo PACK

    Pre-order ONE tube-type SPIN SHIELD

    Spin Shield tube-type cannot be used in tubeless. Tube-type model is not sealent proof!

    We'll contact you after the campaign to provide you the right dimension.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Reward no longer available 1 backer
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  4. Select this reward

    Pledge €79 or more About $89

    1 SPIN SHIELD (Chambre à air)

    Livré avec Chambre à air ULTRA Résistante - ULTRA Light en polyuréthane

    Tube-Type model (Inner tube INCLUDED)

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited 0 backers
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  5. Reward no longer available

    Pledge €129 or more About $146

    First delivery in June

    Community PACK

    Pre-order one AUTHENTIC tubeless SPIN SHIELD
    With TURN & RIDE system

    We'll contact you after the campaign to provide you the right dimension.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Reward no longer available 2 backers
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  6. Select this reward

    Pledge €129 or more About $146

    1 TUBELESS Spin Shield

    With TURN & RIDE system

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited 2 backers
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  7. Select this reward

    Pledge €149 or more About $169

    2 SPIN SHIELD (Chambre à air)

    Livré avec Chambre à air ULTRA résistante - ULTRA Light en polyuréthane

    Tube-Type model (Inner tube INCLUDED)

    Économisez 9€ en achetant une paire

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited 1 backer
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  8. Select this reward

    Pledge €239 or more About $271

    2 TUBELESS Spin Shield

    With TURN & RIDE system

    Économisez 19€ en achetant une paire

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited 1 backer
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  9. Reward no longer available

    Pledge €259 or more About $293

    2 TUBELESS Spin Shield

    With TURN & RIDE system

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Reward no longer available 1 backer
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.

Funding period

- (41 days)