Finclip supports Sharknet
Dear backers, we'd like to present you a revolutionary idea by another Italian startup with whom we are friends with:
SHARKNET IS THE FIRST WEARABLE FOR DIVERS, FREEDIVERS AND ALL... Read more
Consigli per chi ha una misura di piede XXL
nel ringraziarvi sempre per il vostro sostegno, riscrivo l'ultimo update in italiano lasciando al traduttore di Kickstarter (o a Google Translator) il compito di renderlo comprensibile nella vostra... Read more
Tip for big boots owners
we would like to offer a tip to those of you that use big boots:
the nipper can be fixed to the fin 3 or 4 cm further... Read more
Tips on assembling Kit III
first of all, thank you for all your feedbacks. You opinions are precious to us, as they help us to improve Finclip in every aspect.
We would like... Read more
Help the guys from Thalatoo to reach their campaign goal!
we are at the BOOT exhibition in Düsseldorf right now and we met these guys from Thalatoo, who are doing an Indiegogocrowdfunding campaign with a very... Read more
Remember this important step!
we just want to remind you of the right way to proceed when opening the cursor to place the bungee.
If you do not proceed in this way,... Read more
Shipments, e-shop availability and assembly problem
Hi to all of our backers! First of all, we would like to thank you for your patience and sympathy for the delay in sending the rewards to you, but... Read more
Blistering almost completed. Shipping begins tomorrow!
Once again please accept our apologies for the single English version of this update. Waiting for translations in other languages would have resulted in a delay in publication. ... Read more
Production completed! Packiging in blister in progress
Hello to all backers and sorry for writing in English language only!
We are so busy with the packiging of Finclip. Th whole team and our suppliers are working so... Read more
Here we go!
We’ve made it!
Today we have begun series production of the first 2 components that form Finclip: the side connectors and the hook for the elastic.
Production of the... Read more
Results of the dynamic and stress tests (part 2)
we’ve completed the testing of the solution proposed in our last update. Although it works very well we fear that over time, and with intense use,... Read more
Results of the dynamic and stress tests
Dear backers, As you know from previous updates, we have already defined solutions to resolve the minor adjustments to Finclip that have resulted from the vigorous testing that... Read more
Finclip pre-series testing
As we wrote in our last update, we have received delivery of the pre-series finished product and we have begun lab and open water testing.
As far... Read more
We are almost ready!
We are almost ready!!! This week the moulds for the production of FINCLIP will be completed.
As you can see below, the moulds are very... Read more
Good morning, dear backers.
As announced, we are back to update you about the manufacturing of the Finclip molds.
In the photos below you can see the mold that will... Read more
Good morning backers.
As you know, our team made some implementations to the product. These final adjustments were not planned in our original timeline and have, unfortunately, caused a slight... Read more
As we promised, we are back with the renderings of Finclip to show you the new implementations. The adjustments concern both the exterior and the functionality of Finclip.... Read more
Good morning backers!
We are pleased to announce you that last week we signed the contract with the company that will handle the realization of the moulds to produce... Read more
Here we are
So far 10% of you have NOTfilled out your Survey, please do that as soon as possible. To the 90% of you who did fill out the... Read more
our Finclip Kickstarter campaign has just ended and far exceeded our greatest expectations. Thank you so much for the marvelous turnout and for your continued support.... Read more
Scubajet, a Project we Love
we’d like to introduce you to Scubajet, an amazing project that we think it might interest you and that matches Finclip.
SCUBAJET is the most flexible water jet... Read more
Finclip Reached 100% Funding!
We are very grateful to all our backers for your continued support: we have reached our goal all because of you! You are amazing and we couldn't have done it... Read more
We’ve Officially Reached 80% of our Goal
We are very happy to announce that as of this moment we are at 80% of our goal! Thank you so much guys for your support, you... Read more
Here we are on Twitter!
As you can see, there is a new button at the end of the campaign page: it’s our new page on Twitter. If you want to get in touch with... Read more
New Testing and Simulations at the Y-40 Pool
Hello to all fellow divers.
As promised, we went back to the Y-40 pool in Montegrotto to test the new adjustable clamp of Finclip. This new clamp makes it possible... Read more
You are wonderful!
After just 2 weeks since the launch of the Finclip project , we have already reached 51% of our goal!
Thank you! Vielen Dank ! Merci beaucoup! Hartelijk bedankt! Grazie... Read more
Finclip is Ready for the Next Great Step
With great satisfaction, the Finclip Team is pleased to announce that we have found a way to make Finclip suitable for fins that have a thicker rear edge: such as ... Read more
Only a week has gone by since we launched our project and we have already reached 40% of our goal!
Thank you all for your support and confidence... Read more
Press Kit Download Available
Hi everyone! You will notice that a new button has appeared at the end of the campaign page. It says "Media kit download" and if you click it you will... Read more
This Was a Great Start
We would really like to thank you for this great start! Now, we would kindly ask you to spread the word: share this project by clicking on the facebook share... Read more