The "Worlds Over Run" table top model set is a collection of files for 3D printing at home. In this collection, you find all sorts of interesting things to populate your world and give your game that added a sense of a world dominated by an opposing force. With sci-fi structures, alien eggs and pools of goo, you'll find out just how scary an alien world will be. Designed for 28mm table top gaming, and 6x6 inch printer beds minimum. They can also be scaled up to your liking. So please take a look and support the "Worlds Over Run".
All Worlds Over Run files have been test printed in multiple studios, printers, and resolutions. All parts will fit on 6X6 inch or larger printer bed for your desk top printers.
Greg Genung Just released a review of "World Over Run" and I couldn't be happier! I hope our backers and others watching the KS will continue to support our efforts to bring you new and fun content. please take a look at the review and share as much as you're able so we can grow our story. :D
The Thorn, Bio mass and Bio Pools are signs of what over ran this world. The Thorn covered with rich textures tell a gruesome story. The Thorn comes in two parts with pegs provided. The Thorn is just shy of 150mm tall aproxamatly 6 inches tall, and surprisingly well balnced.
The Thorn add-ons add more variations and story telling. The large bio-pool has an impressive footprint 168.6 x 145.5 just around 6 inches square.
Eggs, these biomass creations are one more mark of the invading forces of this world and a nice addition to the Thorn reward. The shorter egg is just about 170mm square.
The floor and wall tiles allow for many variations with a simple layout. The Floor tiles are 50mm square fully modular and print ready. Now with OpenLOCK! All wall and tile systems will support OpenLOCK.
L-Walls are a floor section with walls attached to them. The walls are approximately 70mm tall.
The Corners also have walls added to the existing 50mm floor tiles. Printable as one piece and modular ready.
The " Tower" was a design to get your models off the playing surface and give a 3d aspect to your game. These were designed with simplicity in printing without sacrifices details. With hexagonal floor tiles are 50mm on a side. The tower hight will top out at 230mm or Roughly 9 inches.
The Crate, Bridge, and Ramp were the first to be designed and printed. The focus on these parts is modularity. The Crates, for instance, are stackable and an optional top grate is ideal for teams and squads. 108mm length of the crate.
The Crate is set up to print simply without sacrificing details.
The Bridge is fully modular with great big armor plates and floor tiles you can swap to your liking. With alternate armor offered as a stretch goal. that will take any of the 50mm tiles.
All parts key together and provide wonderful stability for your squads and armies.
The ramp is the last component to this reward, it was also built to hold floor tiles and allow for customization.
I'll be uploading more photos and content through out the campaign, plus you can find the facebook page "Worlds Over Run". Here is a collection of photos from our test printing.
and one more.
STRETCH GOAL! Still building assets!
Some of the assets we're still testing so we're adding them to the complete set of Worlds Over Run assets. These assets will only be available for backers buying the full set ($48).
First up is the Radar Dish. If we make it to 550 + 10 total 560 I'm putting up the radar dish for all full and licensed backers!
With a dish size just under 6 inches, it will project all those distress signals deep into space.
the Vault is just over 4 inches tall with a surrounding platform over 7 inches across. Once we hit 600 the Vault stretch goal will be unlocked!
More to come! Please help us out by reposting and sharing this project!
Tower toppers Stretch goal! Reach 1800 and unlock the Turret and two more tower toppers!
Some Additional stretch goal in development!
Damaged tiles and bulk head doors.
These assets will give the tile and wall components an added level of distressing and damage.
Sharks head Missile Silo
Roughly 120x160x160mm with a huge sharks head built into the missile comes with two types of war heads
The Thorn Hive will rival the tower. with an ant-hill like design, it's the perfect place to spawn your brood. approximately 300X300X150MM
One third of the Thorn Hive for scale as requested by one of our backers. Please feel free to share with other comunitys and thank Mr. Greg Genung for test printing the next asset.
Thorn Bridge is a going to to a raised causeway with Bio-mass construction to add to your Thorn Hive!
Thorn Hive Mega Maw;
This nightmare has been jestating and has erupted into existance. Corrupting the land the Thorn Hive Mega Maw is a unholy presance on the battle feild. combine with a Thron Hive and six Thorns, this addision to your terrain kit it simply terifing.
Risks and challenges
This project was started a while back and got shelved, but recently new life was given to the world and the content we wanted to create and put out there. The technical issues have been addressed through test printing every asset has been printed and most have been printed on different machines in different studios. We've revised all the parts and made edits to give you the world you're going to enjoy playing with and showing off to your friends.
All Worlds Over Run files have been test printed in multiple studios, printers, and resolutions. All parts will fit on 6X6 inch or larger printer bed for your desk top printers.Learn about accountability on Kickstarter
- (15 days)