About
WOR: The World of INFERNO
$11,454
80
Welcome to the World of INFERNO
Welcome to the latest project in the WORLDS OVER RUN series. We are proud to present the fourth installment of our digital terrain series… The World of INFERNO
The World of INFERNO features a 3D printable world of lava and ash designed to create massive multi-tier levels for your tabletop gaming world.
Featuring over 20 stretch goals plus and add-ons this Kickstarter is going to be revolutionary, with 200+ STL files and one of the FIRST campaigns to include the option of a 3D printer as part of a 3D terrain Kickstarter.
Notice: This is a digital product that is a set of STL fIles for 3d printing, this is the digital files only there are no physical 3D Prints included.
Feel the HEAT OF INFERNO!
INFERNO is a white hot world where hellfire and burning ash will bring your campaign a new level of intensity! Traverse into the depths of INFERNO with lava tubes, hell-bound creatures, statues, and even death itself! The World of INFERNO will Elevate Your Gaming!
Below you will find some amazing items that will enhance your game play and bring your tabletop experience to new heights... Or depths. What's holding you back? Don't have a 3D printer? We are changing the game by offering the Creality Ender3 + upgrades** at a price that is unbelievable in order to give gamers the power to expand your worlds beyond what was possible!
QUOTES FROM THE COMMUNITY
Quote: "This Kickstarter is Amazing and I can't wait to add these prints to my shop, my customers are going to go nuts!" - Mike Walker (Omen Games & Hobby)
Quote: "This set is amazing, one of the best and original ideas I have seen for a Hell theme." - Anastasia Ward
Quote: "One of the most amazing 3D Printed terrain set in a long time." - DoomVor (Blizzard Software)
Quote: "They say if you are going through hell, keep going. With inferno, stop and enjoy the journey." - Keven Rank (Makerfun3d.com)
=======================================================================
PRESS/NEWS!!!!
There is a write up on the Miniatures Man CLICK HERE!
Legends of Tabletop Interview with Eric Askue Time Stamp 39.45 CLICK HERE!
=======================================================================
FILAMENT COLORS
UPDATED INFO: Images of the terrain from this project that has been already Test Printed and photographed!!!
=======================================================================
The RIFT: Lava Falls
The Rift is a shear cliff anchored in decimated earth and burning ash, pulsing with intense veins of magma within. The Hellish inhabitants of INFERNO have discovered ways by which to mine and divert the magma via channels and lava falls as a means to expand and torture. Beware the power and beauty of the Lava Falls lest it become your tomb!
The Lava Falls measures 300mm x 400mm x 250mm. A massive centerpiece for any game, the Lava Falls can be expanded even larger using the stretch goal item The RIFT WALL which allows you to expand the falls to an even more massive size enhancing you gamers experience and covering more of your game table with amazing terrain.
Stairways of the Damned
They say the road to hell is paved with good intentions... In the World of INFERNO, the Stairs will do you no favors either. We present to you several variants of stairways that will lead your campaign to triumph or disaster! Choose your paths wisely and you may evade Death's icy grip!
The Spiral Staircases may be printed with and without the statue base to give maximum flexibility for your campaign.
The Straight Staircases are available with two levels; one reaching a height of 50mm from the base of the terrain and the other going from 50mm to 100mm in height.
The Statues
The Reaper
The Premiere statue representing the soul of INFERNO is The Reaper and he is death incarnate! The Reaper is honored in the World of INFERNO with statues to his glory. This nearly 7 inch figure towers over the World of INFERNO as a vigilant collector of souls. Player may encounter this dreaded dark demon of death while traversing the various terrains, structures and stairs of INFERNO. This model is cut into 7 pieces and prints without supports.
The Faceless Woman
The Beauty of the Skull
The Variants of the Statues
The Lava Fields
The Lava Fields are the ground tiles for the set, they will come in several sizes and styles.
The tile set will offer ground tiles in 50mm, 75mm, 100mm, 150mm, 200mm and a huge 250mm ground tile as well as many others. These tiles will feature different textures and terrain allowing you to build nearly an unlimited number of ground plains
The Lava Tubes
The Lava Tubes are an addition to the Ground Tiles giving a unique feel to the table, not only do they offer a welcome enhancement to the ground they can also climb into the sky offering an even more immersive gaming experience. Also The Lava Tubes offer the ability to add the buildings on top of them enhancing the Hell Scape you create.
The Buildings and Walls
The Buildings and Walls offer some amazing flexibility to the project, with the wall sections you can build structures all over the table or just build a wall across hell for you units defence. The buildings are built from the wall sections and corner tiles allowing you to use one of the building roofs to complete your table or you can stack several sections on top of one another and create a multi-level building giving you even more possibilities on in your game.
Tile Lifters
The Tile Lifters allow you to build upwards and create different elevations for structures, hills, clifts, and even mountains upto 300mm in height...the system has been tested higher but we recommend the 300mm range.
WOR POPPER (For use with OpenLOCK)
The WOR Popper is a tool for inserting and removing OpenLOCK clips, we created this tool as a result of hearing about new games hurting themselves while inserting OpenLOCK clips into tiles and cutting their thumb to the point of bleeding all over the gaming table...so we created the WOR Popper to save on thumbs :)
STRETCH GOALS
ADD-ONS
- $10 - Demon Dogs
- $10 - Fire Hounds
- $15 - Twisted Tower
- $12 - The Fountain of Blood
- $15 - The Death Pit
- $10 - The Death Mound
- $18 - Chained Angel
- $13 - Demon: Demech The Faceless
- $13 - Demon: Calakidia Visier of lies
- $35 - Demonic Character Set(Demon Dogs, Fire Hounds, Demech The Faceless and Calakidia Visier of lies )
WOR CATALOGS
- $55 - The World of Thorn (Not part of INFERNO Additional add-on, add in the Pledge Manager at the end of the Kickstarter (Just Add amount to your pledge))
- $45 - The World of Scorch (Not part of INFERNO Additional add-on, add in the Pledge Manager at the end of the Kickstarter (Just Add amount to your pledge))
- $60 - The World of Grove (Not part of INFERNO Additional add-on, add in the Pledge Manager at the end of the Kickstarter (Just Add amount to your pledge))
- $60 - The World of Strata (Not part of INFERNO Additional add-on, add in the Pledge Manager at the end of the Kickstarter (Just Add amount to your pledge))
- $45 - Epic Encounters Chapter 1 (Not part of INFERNO Additional add-on, add in the Pledge Manager at the end of the Kickstarter (Just Add amount to your pledge))
3D PRINTERS
As part of this Kickstarter we will be offering 3D Printers as well as STL files. With the reward levels of “All In Digital INFERNO” and “All In Digital INFERNO Plus” you will have the option to include a Ender 3 (Enhanced) 3D Printer. Each printer will include one full roll of Filament to get you started on your printing of the terrain.
This is an add-on to the pledge levels and you will need to add $275.00 to your pledge and at the end of the campaign you will see the options in the Backerkit Pledge Manager if you want more.
So if you select the pledge level of “Digital INFERNO Plus with 3D Printer” you can add an additional 3D Printer to your pledge in the pledge manager for $275.00!
Also if you pledge at either of the "Commercial Licensed Printer w/3D Printer" levels you can purchases up to five printers in the pledge manager for this great price thru the Backerkit pledge manager.
Ender-3 advantages:
Good printing quality, reasonable cost for the beginners and good performance for the enthusiasts.
Simple to assemble but easy to maintain, only 20 screws to finish assembly , 10-40 minutes and start your first print!
Origin of this printer is from the classical Prusa I3, match with V-slot sport model which have POM wheel that make it less noises then other printers on the market.
Big printing volume with a compact size, this printer has a print volume of 220*220*250mm / 8.6 x 8.6 x 9.8 inches.
Hotend Silicone Socks are made of a heat-resistant, non-stick silicone material, it will keep your heater block clean and will help retain the heat.
Aluminum Alloy Extruder greatly reduces clogging risk and the issues of bad extrusion.
Includes two super build plates, the Cmagnet soft Magnetic build plate and the Carbon crystal coated glass bed, these build plates give you much better adhesion for your prints, and easy to remove.
and more ...
------------------------------------------------------------------------------------------------
UPDATED INFORMATION 01/30/2019:
ENDER 3
These are the upgrades we are looking to do during the Kickstarter, some will be part of the base machine and others as stretch goals.
Stock Creality 3D Ender 3
- Upgraded Aluminum Bowden Feeder Assembly
- Upgraded Boden Tube, MUYI PTFE Teflon Tube for use with 1.75mm Filament and Ewigkeit PC4-M6 Straight Pneumatic Fittings Push to Connect + PC4-M10 Quick in Fittings for 3D Printer Bowden Extruder
- Cmagnet soft Magnetic build plate
- Carbon crystal coated glass bed
- Hotend Silicone Sock
- ABL Uxcell LJC24A3-T-Z/AY 15mm Capacitance Proximity Sensor
- Uxcell Bed Springs
Additional recommended optional user upgrades for the Ender 3
Z-Motor Spacer/Support - https://www.thingiverse.com/thing:2925230
Belt Tensioner - https://www.thingiverse.com/thing:2986144
Display Ribbon Cable Clip - https://www.thingiverse.com/thing:2880021
Display LCD PCB Cover - https://www.thingiverse.com/thing:2858209/
Board Fan Guard - https://www.thingiverse.com/thing:2935204
Cable Chain - https://www.thingiverse.com/thing:2920060
Petsfang Duct - https://www.thingiverse.com/thing:2759439
Pressure Fitting Lock - https://www.thingiverse.com/thing:2994683
__________________________________________________________________
Ender 3 (Enhanced) Machine Parameter:
Modeling Technology: FDM
Power Supply: Certified power supply
Printing Size: 220*220*250mm / 8.6 x 8.6 x 9.8 inches
Max Traveling Speed: 180mm/s
Recommended speed:40-80mm/s
Filament: 1.75mm PLA recommended, ABS,HIPS,Wooden available
Layer Thickness: 0.1-0.4mm
Nozzle diameter: 0.4mm
Precision: ±0.1mm
File Format: STL, OBJ, G-Code
Max Nozzle Temperature: 255℃
Max Hot bed Temperature: 110℃
Input: AC 100-265V 50-60Hz
Output: DC 24V 15A 360W
Working Mode: USB cable (included) online compatible or micro-SD (offline)
Machine Size: 440*410*465mm / 17.3x16.1x18.3 inches
Package weight: 8.6kg / 19 lbs
Fulfilment of the Printers will be by Haldane Creations
Haldane Creations is an authorized reseller for Creality 3D in the USA.
FILAMENT
As part of this Kickstarter we will be offering 3D Printer Filament so that you can stock up on filament to print your new terrain. We will be offering filament in Black and White to keep it simple and at a the great price of $10.00 per spool, just add the number of spools you want at the end of the champion in the Backerkit pledge manager.
Creality 3D engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.05mm.
PLA(Polylactic acid) is a environmentally friendly materials that can easy to be degradated and without smell. It is thermoplastic aliphatic polyester made of renewable resources like corn or starch. Its extrusion-temperature is much lower than ABS, and most often doesn't require a heated bed. It is the " default " recommended material for many desktop 3D printers. It has the following characteristics:
• Good toughness high strength, high stiffness
• No block nozzle, good stick hot bed, a smooth PLA used
• Low shrinkage, thermoforming dimensional stability
•Accurate diameter: 1.75mm, variations + /-0.05mm, roundness +/-0.03mm
Unique features:
1) Diameter tolerance is within ±0.02
2) The regular PLA in today's market is very brittle after awhile, Creality 3D's PLA is modified and is more flexible, also it has a shelf life of at least one years.
3) Several times tougher than regular PLA resulting in improved strength and impact resistance.
4) Superb layer bonding.
5) High rigidity. Good glossiness.
Pledge Management will be handled thru BackerKit, this choice was made after talking with many creators on Kickstarter and overwhelmingly the pointed us to BackerKit because they are the best at what they do and we wanted the best for our backers.
Risks and challenges
We have completed four successful kickstarter campaigns. The main files for INFERNO are complete. We have not completed any stretch goals yet but we have completed most of the basic work and blockouts. We expect to deliver the initial product and some of the stretch goals when funding is released. Usually this means 2 weeks after funding ends. Remaining stretch goals and add-ons will be released intermittently for 1-3 months. The timeline will be based on the number of stretch goals that have been unlocked. As for the delivery of the 3D Printers and Filament, they will arrive in 60 to 90 days after the funds are released and will begin shipping 14 to 30 days after that. The only real challenge is the logistics of the printers and filament and we feel very confident that we have this under control. Now as for risk, the only real risk is if we get hit by a bus during this kickstarter but seeing that we all live in different locations the odds are slim not impossible but very slim :)
Learn about accountability on KickstarterQuestions about this project? Check out the FAQ
Support
Funding period
- (28 days)