Andere über dieses Projekt informieren

Fertig

Andere über dieses Projekt informieren

Fertig
An open source 4 by 8 foot CNC cutting machine for under $500. A router designed to let you cut big, useful things out of wood and more
An open source 4 by 8 foot CNC cutting machine for under $500. A router designed to let you cut big, useful things out of wood and more
Erstellt von
1.279 Unterstützer trugen 314.547 $ bei, um dieses Projekt zu verwirklichen.

Über uns

Maslow CNC - a $500 open source 4 by 8 foot CNC Machine Project-Video-Thumbnail
Wiedergabe Ton AN
Mit Ton
wiedergeben

Maslow CNC - a $500 open source 4 by 8 foot CNC Machine

314.547 $

1.279

Was ist ein Prototyp?

Ein Prototyp ist sozusagen ein vorläufiges Modell dessen, was bei einem Projekt entstehen soll, wenn es sich dabei um ein Produkt handelt. In diesem Fall müssen den Unterstützern Unterlagen zu einem funktionierenden Prototypen präsentiert werden. In dieser Galerie kann der Projektgründer Fotos oder Videos hochladen, damit sich die Unterstützer eine Vorstellung davon machen können, in welchem Stadium sich das Projekt befindet; was bereits erreicht wurde und was noch aussteht. Der Entwicklungsprozess ist zwar bei jedem Projekt unterschiedlich, aber für gewöhnlich gibt es dabei die folgenden Phasen:

Konzept-Nachweis

Untersuchungen, die Ideen und Funktionalität unterlegen.

Funktionsprototyp

Weist Funktionalität des Endprodukts auf, sieht aber etwas anders aus.

Geometrischer Prototyp

Sieht aus wie das Endprodukt, hat aber keine funktionalen Eigenschaften.

Designprototyp

Sieht aus wie das Endprodukt und hat dieselben funktionalen Eigenschaften, wurde aber aus anderen Materialien oder in einer anderen Art und Weise hergestellt.

Technischer Prototyp

Gleicht dem Endprodukt in Aussehen, Funktion und Herstellungsweise.

3b5908d664854c2ee603627af3f4dd1a original.jpg?ixlib=rb 2.1

Prototypen-Galerie

Diese Fotos und Videos verschaffen einen detaillierten Überblick zur Entwicklung des Projekts.

                                ******* UPDATE *******

Hi Everyone! We want to say a HUGE thank you to everyone who has supported us and our project, and another HUGE thank you to those of you who are just now arriving and want to support our project.

As of now we are sold out! It’s exciting and sad at the same time! We’re not taking any more orders right now, but we are making sure you can still get involved.

Anyone who backs us for any amount (even $1) will have a place saved in line for our next batch. By pledging for any amount, you get a backer number which will hold your place in line. You will also get all of our updates to stay informed, and we’d love to have you be a part of our community. We’re not planning on changing the price or anything crafty like that, we just want to make sure we have the resources to get everything done, get it done right, and get it done on time.

What is Maslow?

Maslow is a large 4 by 8 foot CNC cutting machine designed to let you cut big, useful things out of wood and other flat materials. Cut out a tiny house, a kayak, a tree house, some furniture, or anything else you can imagine. Maslow is designed to be affordable to buy, cheap to ship, easy to use, and powerful. Because designs can be shared digitally, you can build on the work of others or create your own from scratch.

You are going to build amazing things.

 Specs: 

  • Work Space: 4' X 8' * 
  • Encoder Resolution: 8148 steps/rev 
  • Real World Precision: +- 1/64th inch (.4 mm) or better 
  • Max feed rate 48 inches/minute 
  • AC Voltage: 110-250 volts 
  • DC Voltage: 12 volts 
  • Connection: USB 
  • OS for Software: Mac, Windows, Linux 
  • Size: H: 6' 8" W: 10' D: 1' 7"  

*The work space is defined by the length of the two #25 roller chains so it can be easily enlarged or made smaller by adding or removing links from the chains.

Backer Rewards: 

  •  $1+ Pay What You Want
  • $25 Support a School
  • $350 Maslow CNC Machine Kit (Batch #2)
  • $550 Maslow CNC Machine Beta Tester Kit

What will YOU build?

Here are some CNC-produced projects to help get you thinking: a kayak, a house, home improvement, furniture, a green house, or art. We can't wait to see what you come up with! You can find more project inspiration on our website.

Who's talking about us?

Maslow CNC Press Kit Get it here!

Can't believe it works?

Maslow is something new in the world of CNC cutting machines, but it's based on a design which has been around for years: the hanging plotter

There are some amazing 4'x8' CNC machines out there, but they are all too expensive and too large. The design DNA of most CNC routers comes from the upright mill found in a machine shop, but their jobs are entirely different. An upright mill is designed to carve a relatively small cube of metal in 3D with extreme precision. A CNC router is mostly used to cut sheet materials. We decided it was time for a completely new design. Check out the video to see a walk-through of the design.

How easy is it to use?

CNC can be intimidating so we've designed Maslow to be easy to use. We know there are a lot of you out there who have a tiny house / wooden boat / home improvement project in mind but the idea of using a CNC machine to make it real seems like a big step.  

Maslow is meant to be a machine for everyone. Like any new tool, there are a couple things you will need to learn, but we'll be there for you in the community forums we've set up. You are going to build amazing things.  

Check out the videos for a quick overview of what it's like to cut something out.

This is a KIT!

One thing we want to be 100% clear about is that this CNC machine comes in "kit" form - you have to assemble it. We will provide detailed, step-by-step video assembly instructions. Here's a sample instructional video from our last CNC project.

What is not included in the box?  

You will need to buy two standard clay bricks, two sheets of plywood and three 10 foot 2x4s. Shipping a machine the size of Maslow would be tremendously expensive, so we had to think outside the box ;-). You will also need a standard wood router if you don't have one. We recommend the Ridgid R2200.

Beta Disclaimer:

Maslow is an open source project which means it’s built by and for the community. The purpose of the beta tester backer group is to get hardware into the hands of the community as quickly as possible. That means as a beta tester you will get access to the machine before the software is fully polished. You will likely find bugs and hopefully you will let us know when you do so we can fix them. At whatever level you pledge, please keep in mind that this is something entirely new. No one has ever created a 4’x8’ CNC router at even close to this price, so we will be learning with you. 

Transparency is our highest priority with this Kickstarter project. 

Delivery Timeline: 

 Support a School!

Are you involved with or do you know of an educational institutional who would love to have a Maslow CNC? For every 20 machines sold, we are donating 1 to an educational institution of your choice! This includes but is not limited to high schools, universities, boy scout troops, maker spaces, etc, both national and international. You can help support a school by backing at the $25 level, which will help us to pay the cost of shipping to the selected schools. Please visit this link if you have a school in mind that would love to use Maslow, or share the contest with others who may want to nominate. 

Meet the team:

  • Bar Smith - Founder, Engineer 
  • Hannah Teagle - Co-founder, Communications & Outreach 
  • Tom Beckett - Co-founder, Crowdfunding Strategy 

In 2014 we successfully funded and delivered a Kickstarter project for the Makesmith CNC, The Most Affordable Desktop CNC Router. Learn more about us and our last successful project here

Need some time to decide? 

Back us for a "buck" so that you receive project updates that announce new developments!

Acknowledgements:

  • Galen Forrest, Videographer
  • Dillon Carson, Graphic Designer

Risiken und Herausforderungen

This project is an evolution of the Makesmith CNC Kickstarter project we successfully funded and delivered in 2014. We know what it takes to tackle an ultra low-cost CNC project. Like last time, we intend to get it done on time and on budget.

Risks and challenges include the typical issues that arise from managing a supply chain. We’ve done two things that should make this project go smoothly. First, we’ve used standard components wherever possible, such as using a Mega R3 as the brain instead of a custom board. By using standard components, we are getting parts which have been built, tested, and improved over the course of many years. Second, every piece of Maslow has already been prototyped by not one, but two suppliers. That means that no single supplier is critical to our supply chain.

Most obstacles can only be addressed once they’ve been encountered. One that we have identified is the possibility of things moving a bit slower than we would like during the upcoming holiday season. Our campaign will end just before Thanksgiving, and our purchasing activities will take place in the weeks following. With the upcoming December holidays, things may slow down a bit externally. For that reason, we’ve conservatively budgeted significant buffers into our delivery schedule.

As many returning successful project creators like to say, this is not our first rodeo. At the end of the day, we have a complete machine cutting out parts in our garage as we speak, and we’re excited to get you set up in the same capacity! We have an unstoppable will to get this machine into your hands so we can see what kind of amazing things you will build.

Thanks for checking out our project!

Sincerely,
Bar, Hannah, & Tom

Näheres zur Rechenschaftspflicht auf Kickstarter
Noch Fragen zu diesem Projekt? Viele Antworten findest du in den FAQ

Support

  1. Diese Belohnung wählen

    Mindestbeitrag: 1 $ Ungefähr 1 $

    Pay What You Want

    This is an Open Source project so all of the software and design files are free, but if you want to buy us a beer, we'll gladly drink it in your honor!

    Weniger anzeigen
    Voraussichtliche Lieferung:
    422 Unterstützer
    $

    Durch Leisten eines Finanzierungsbeitrags stimmst du Kickstarters Nutzungsbedingungen, Datenschutzrichtlinien und Cookie-Richtlinien zu.

    Kickstarter ist kein Geschäft.

    Es ist eine Plattform, um kreative Projekte ins Leben zu rufen.

    Weitere Informationen zur Rechenschaftspflicht.
  2. Diese Belohnung wählen

    Mindestbeitrag: 25 $ Ungefähr 25 $

    Support a School

    For every 20 machines sold, we are donating 1 to a school! Support our project by helping us to cover the cost of shipping to these schools.

    Weniger anzeigen
    Voraussichtliche Lieferung:
    59 Unterstützer
    $

    Durch Leisten eines Finanzierungsbeitrags stimmst du Kickstarters Nutzungsbedingungen, Datenschutzrichtlinien und Cookie-Richtlinien zu.

    Kickstarter ist kein Geschäft.

    Es ist eine Plattform, um kreative Projekte ins Leben zu rufen.

    Weitere Informationen zur Rechenschaftspflicht.
  3. Belohnung nicht mehr verfügbar

    Mindestbeitrag: 350 $ Ungefähr 350 $

    Maslow CNC Machine Kit

    All the hardware you need to build your own Maslow CNC cutting machine from the arduino and motor controllers, to the right length wood screws.

    NOT INCLUDED: two standard clay bricks, two sheets of plywood and three 10 foot 2x4s. Please purchase those at your local hardware store. They wouldn't fit in the box ;-) You will also need a standard wood router if you don't have one. We recommend the Ridgid R2200.

    Weniger anzeigen
    Voraussichtliche Lieferung:
    Versand: Weltweit
    Belohnung nicht mehr verfügbar 400 Unterstützer
    $

    Durch Leisten eines Finanzierungsbeitrags stimmst du Kickstarters Nutzungsbedingungen, Datenschutzrichtlinien und Cookie-Richtlinien zu.

    Kickstarter ist kein Geschäft.

    Es ist eine Plattform, um kreative Projekte ins Leben zu rufen.

    Weitere Informationen zur Rechenschaftspflicht.
  4. Belohnung nicht mehr verfügbar

    Mindestbeitrag: 350 $ Ungefähr 350 $

    Maslow CNC Machine Kit (Batch #2)

    All the hardware you need to build your own Maslow CNC cutting machine from the arduino and motor controllers, to the right length wood screws.

    NOT INCLUDED: two standard clay bricks, two sheets of plywood and three 10 foot 2x4s. Please purchase those at your local hardware store. They wouldn't fit in the box ;-) You will also need a standard wood router if you don't have one. We recommend the Ridgid R2200.

    Weniger anzeigen
    Voraussichtliche Lieferung:
    Versand: Weltweit
    Belohnung nicht mehr verfügbar 250 Unterstützer
    $

    Durch Leisten eines Finanzierungsbeitrags stimmst du Kickstarters Nutzungsbedingungen, Datenschutzrichtlinien und Cookie-Richtlinien zu.

    Kickstarter ist kein Geschäft.

    Es ist eine Plattform, um kreative Projekte ins Leben zu rufen.

    Weitere Informationen zur Rechenschaftspflicht.
  5. Belohnung nicht mehr verfügbar

    Mindestbeitrag: 550 $ Ungefähr 550 $

    Maslow CNC Machine Beta Tester Kit

    You get everything in the regular “Maslow CNC Machine Kit”, and you get it FIRST!

    This is an open source project and we want to get you involved as a BETA tester! If you are ready to help improve the design or just want to start cutting as soon as possible, this is the reward tier to choose. If any of the hardware design is improved by the time the standard kits are shipped out, we will ship you a second package with the additional parts. If there are only software improvements, we will reimburse you for the additional shipping payment you provided.

    Please review what is included in the standard “Maslow CNC Machine Kit” pledge level.

    Weniger anzeigen
    Voraussichtliche Lieferung:
    Versand: Weltweit
    Belohnung nicht mehr verfügbar 106 Unterstützer
    $

    Durch Leisten eines Finanzierungsbeitrags stimmst du Kickstarters Nutzungsbedingungen, Datenschutzrichtlinien und Cookie-Richtlinien zu.

    Kickstarter ist kein Geschäft.

    Es ist eine Plattform, um kreative Projekte ins Leben zu rufen.

    Weitere Informationen zur Rechenschaftspflicht.

Finanzierungszeitraum

- (28 Tage)