FORT HARDKNOX - A 28mm Post Apocalyptic fortress
A 28mm Post-Apocalyptic and Science Fiction fortress. The ultimate PA gaming piece!
This project will only be funded if it reaches its goal by Mon, June 3 2019 10:59 PM UTC +00:00.
'Carefully' constructed from Ironpith cactus, boilerplate, desert rocks and ad-hoc-crete; FORT HARDKNOX has survived attacks by the Big Booted Bovver Bois, scores of Mutant Rokkers, Bio-Troopers, Ratts, Bratts and Governor Gograx's Guards. FORT HARDKNOX keeps on truckin'!
Lay your hard earned teef/tech/delicious rat meat down on a FORD HARDKNOX today and you can enjoy these benefits among many more...
-Flexible semi-modular design. Plonk it down on the table in seconds but create range of setups
-Minimal construction, simply assemble the three-piece walkways, push together the wall sections and you're done!
-Fort Knox is designed to take HARD KNOX. While you will want to be careful with the thinner sections (what else is new!) the wall sections are very tough, and don't need basing.
-All parts are cast in grey resin. No mold release agent is used, NO NEED TO WASH! Brush off any dust and get crackin'.
-While the set is designed as a PA fortress, the walls are equally useful in hive cities, ash wastes and shanty towns!
FORT HARDKNOX - THE BASE SET
The base set gives you four straight wall sections, three corner wall sections and a gate section. Also included are seven walkways and fourteen walkway supports, a set of ladders and individual plates for covering gaps and customising the fort.
With the base set you can create a terrain centerpiece of 32cm by 32cm or a continuous wall of 1 metre length. Each wall section and walkway is a unique sculpt, and there are sixteen unique walkway support sculpts from which you will receive a selection of fourteen.
Whilst the gate section as provided in the base set is designed to be placed on the corner, an extra corner wall section (see ADD-ONS below) allows the gate to be used in place of a straight section.
UNIVERSITY OF HARD KNOX - THE 'ALL-IN' SET
This set gives you one of everything except the basic gate, allowing you to build a double-wide stonker measuring 44cm by 44cm.
In order to make sure you and your mohawked, iron-pumping compadres get the hideout they deserve, you can add any of the below upgrades to your basic fort by increasing your pledge in the pledge manager. Substitutions are possible, please message us about these.
Stretch goals are available as add-ons once unlocked, see below!
If you want to replace the Small Gate with this upgrade, add an extra £10 to your pledge. If you'd like the Larger Gate in addition to the Small Gate, add £25 to your pledge.
If you'd like to get hold of the original gate separately add £17 to your pledge.
Extra walls upgrade
Add an extra wall section by adding £17 to your pledge. There are two additional unique sculpts available, and you can add as many extra sections as you'd like (i.e. copies of the basic walls). These come with walkways and walkway supports.
Extra corner wall upgrade
Add this corner wall section by adding £18 to your pledge. This comes with walkway and walkway supports. This wall section is modelled so as to be used as either and external corner or an internal corner. It can also be useful if you want to move the gate from the corner of the fort to a straight section.
Destroyed wall upgrade
Add this upgrade by adding £8 to your pledge. This upgrade consists of two parts which can replace any wall section to represent a destroyed wall.
Integral tower wall upgrade
Add this wall section with integral tower by adding £20 to your pledge. This section consists of five parts.
Small watchtower upgrade
Add the small watchtower by adding £18 to your pledge. The small watchtower consists of three parts.
Large watchtower upgrade
Add the large watchtower by adding £25 to your pledge. The large watchtower consists of three parts.
Shack fronts upgrade
Add this upgrade by adding £10 to your pledge. Four straight and three angled frontages are included allowing you to turn the space under the walkways of the basic fort into buildings.
Scatter terrain upgrade
Add this upgrade by adding £10 to your pledge. This upgrade includes six scatter barricades.
Please use the pledge manager to specify which upgrades you'd like to add to the basic fort, and feel free to contact us if you have any questions!
Space Barbarian IN SPACE glyph pack
36x approx 8mm square glyphs to celebrate kultur. Automatically added to 'all-in' pledges. £5 a set as an add-on.
Windows and Doors set
A set of 11 windows and doors to further personalise FORT HARDKNOX and any other shoddy shanty. This will be added to all £140 and above pledges! You can add extras for £5
Nodding Donkey pump-jack-pack
Once unlocked this will be included with all UNIVERSITY OF HARDKNOX pledges, and will be available as an add-on once unlocked for £12. Yes you can add that to the pledge manager now to get us towards the goal!
This set of accoutrements and accessories allows you to do a desert MOT on Trukks, Buggies and all kinds of post apocalyptic whips. This set will be added to all UNIVERSITY OF HARDKNOX level pledges and is available as an add-on for £8.
A set of these will be added to each University of Hardknox pledge, otherwise a set can be added for £10 in the pledge manager.
ADDITIONAL FOGOU MODELS
Check out www.FogouModels.co.uk to see if you'd like any other models from the range. Carry out an order on the webstore as normal, and Choose 'KICKSTARTER' as a shipping option. These extra Fogou products will be packaged with your pledge and postage charged for the total. Include your Kickstarter username in the order notes.
Here's a small selection of what's on offer:
All models are supplied unpainted and all 28mm figures shown (GW, Ramshackle Games) without permission and are included for comparison purposes only.
Fort Hardknox is a big set of rugged raw terrain, and with the flexibility offered by the upgrades offered and wide variety of potential set ups to disperse around the world the decision has been made to calculate shipping on an order-by-order basis.
Shipping will be by courier service and will be charged at cost after the campaign. Please take notice of the applicable customs charges and taxes in your location. We cannot be held responsible for extra costs or delays as a result of these.
We would be more than happy to keep hold of your pledge and post it to a UK address at a time and date that suits you if you plan on visiting and would like to take it back with you, just let us know! You can also pick up from Cornwall if you'd prefer.
If you'd like the cost of your pledge calculated before committing, please send a message and we will crunch the numbers. Here are some quotes for illustrative purposes only at the time of the start of the campaign;
The basic set
- UK - £8
- France - £14
- USA - £26
- Australia -£27
The all-in set
- UK - £8
- France - £16
- USA - £38
- Australia -£43
Risks and challenges
The painted examples seen above are casts from production molds.
Casting is done in-house and we have been producing models with the same process for four years. We can start immediately once the funding goal is reached and we will endeavour to send you your pledges in the order they are placed.Learn about accountability on Kickstarter