Share this project

Done

Share this project

Done
Heavy duty 3-axis gimbal with exceptionally strong motors & frame that easily support Red Epic, 5D/60D/70D & D800 w/ larger lenses.
42 backers pledged $142,201 to help bring this project to life.

About

AllSteady-7 DSLR & Red Camera 3-Axis Stabilizer Gimbal project video thumbnail
Replay with sound
Play with
sound

$142,201

42

Our Kickstarter campaign is over, but you can still get an Allsteady 7. Head over to www.turboace.com for more info and to place an order.

Finally, an extraordinary gimbal to unleash the cinematographer in you. Handling cameras from a 5D with cine lenses to a fully geared Red Epic with battery modules, the AllSteady-7 from Turbo Ace is an evolutionary 3-axis gimbal that enlightens and inspires.

The AllSteady-7 gimbal utilizes proprietary and patent-pending design featuring an internal tube clamping system, single-lever tool-less adjustments, compact folding for efficient gear-down and two extra large payload options. To target specific range of cameras, lenses and gear, we now offer four prepackaged AllSteady-7 gimbals with different dimensions and payloads. Thus far, the AllSteady-7 Cinema is the most popular package targeting Canon 5D/6D/7D/60D/70D, C300/500, 1D C/X, Nikon D800, BMCC and Red cameras follow by the AllSteady-7 Ultimate with an expanded frame and huge 18 lbs capacity targeting longer camcorders such as the Sony F55/FS700 and especially heavier fully geared BMCC & Red Epic/Scarlet/Dragon with extra spacing and capacity for additional gear and battery modules. With our vast experience in gimbal technology and development, the All Steady-7 is the ultimate fusion of strength and versatility.

Swapping Cameras & Lenses with Quick-Release Adjustment

With a capacity of 12 lbs (AllSteady-7 Deluxe, Elite & Cinema) to 18 pounds (AllSteady-7 Ultimate), AllSteady’s patent pending heavy duty structure and powerful motors are designed to support easy transitions between various combinations of large cameras and lenses. Whether you are switching between larger lenses on a Nikon DSLR, a Canon EOS, a Sony Super Camcoder or gearing up a Blackmagic Production 2K/4K or Red Epic/Scarlet/Dragon with grips and battery packs, there is an AllSteady-7 package to accommodate all your filming needs.

To facilitate easier transitions between cameras and lenses, AllSteady-7's exclusive tool-less quick-release mounting platforms enable fast and easy tuning. Whereas traditional mounting brackets are adjusted by loosening and tightening 4 screws, AllSteady-7 quick release platforms - one below the pan-axis motor and one in front of the roll-axis motor - enable adjustments to slide and lock into desired lengths on the boom while retaining its original rotation on the boom. Because of these advances, AllSteady-7 takes only a fraction of the time to balance or tune compared to traditional gimbals. 

Ultra Fast Auto-Stabilization with Follow & Motorized Movement

Guided by advanced custom gimbal controller, the AllSteady-7 offers a fast 8-bit processor (DIY Kit & Deluxe Packages) or an ultra fast 32-bit processor with 30A current (Elite, Cinema & Ultimate Packages only) for pan, roll and tilt auto-compensation with a smooth full follow mode. When integrated with the optional Stick Control Module (Elite, Cinema & Ultimate Packages only), operators can also switch between several stabilization modes while using the joystick to create smooth motorized camera movements. For cameraman walking or running on uneven surfaces, start with the "Steady" mode for comprehensive auto-stabilized videos to lock your subject in a leveled horizon. Switching over to "Full Follow" mode enables the cameraman to pan & tilt the camera with auto-stabilization to follow a subject's movement or to change the background. If the cameraman only needs to pan but not tilt the camera, switching over to "Dedicated Follow" will allow the operator to pan with auto-stabilization at a persistently leveled horizon. Another handy Stick Control Module function is motorized panning or tilting via joystick control, a great way to create smooth and consistent camera movement from a stationary or moving vantage point.

The custom PCB for the 32-bit processor with 30A controller:

Strong, Durable Structure

Consisted exclusively of premium aluminum and carbon fiber components, no expense has been spared in forming a heavy duty AllSteady-7 structure. Specialized patent pending elements are designed to reenforce the integrity of a super rigid structure to carry heavy payload in motion. Typically, a gimbal weakest points are the joints that connect and hold each of its carbon booms and aluminum frames in place. As part of our initial market research, we tested numerous gimbals for strength, and found that none survived the payload test beyond 4 to 5 lbs. Pressed for an easy solution, some inexperienced designers even resorted to using flat tubes or double booms that are inherently imprecise and neither can be realigned. Depending on how these tubes are aligned, there is always a weakness in either the horizontal or vertical direction causing videos to shift or bounce. Speaking of strength, overstated gimbal payloads is a common practice with little consideration for performance and durability even on $15,000 gimbals.

To address these vital issues head on, AllSteady-7 designers were determined to go beyond just strengthening the material used. While retaining 25mm carbon handles booms to reduce weight, more critical booms under the pan-axis motor are all upgraded twice from 25mm to 30mm then to 40mm for improved rigidity. For uncompromised structural integrity, Turbo Ace implemented a series of innovative patent pending elements: double sided internal clamps on elbows to prevent boom slippage, dual-axis cross threaded motor shaft for securing motor operations, and revolutionary zero slop bearing supports to completely eliminate slop for exceptionally smooth precision movements.

Powerful Over-Sized Brushless Motors

A motor's capacity to hold and control the payload will determine what camera, lens and accessories can be used. Although all 3 motors are important, the pan-axis motor at the top of the gimbal carries the most weight, so it requires more power than the two lower motors for the roll-axis and the tilt-axis. While sharing a similar support bearing structure as the previous AllSteady-1 model, the AllSteady-7 pan-axis motor size has been upgraded to support up to 12 pounds on AllSteady-7 Kit, Deluxe, Elite & Cinema Packages. If you want to accommodate even heavier payloads such as a fully geared Red Epic you will need to upgrade to the AllSteady-7 Ultimate Package with huge motors to sustain up to 18 pounds. These modifications not only increase payload capacity and durability but also improve versatility and convenient camera and lens change. Unlike pancake motors with overstated payloads that might only last for a couple of productions runs, robust AllSteady-7 motors are protected by support bearings. And for extra reinforcement, the pan-axis motor is also caged (not shown in picture below). The picture below shows the motors for the AllSteady-7 Deluxe, Elite and Cinema Packages. Pictures of larger upgraded motors for the AllSteady-7 Ultimate is not yet available.

User Friendly Ergonomic Features & Accessories

An integrated power on/off switch facilitates easy starts and stops between shots. Battery Status LED (Elite, Cinema & Ultimate Packages only) with auto shut off enables the operator to monitor the power and protect the battery. To relieve strain and maximize comfort on extended operations, the AllSteady-7 is fitted with ergonomic rubberized handles for a slip-free grip that’s 360° adjustable. By aligning and locking both side-handles at 45° increments, you can comfortably operate your camera at chest height, away from the body, above the head or below the knees. All electronics, wiring and switches are integrated into a sleek and functional framework. Optional features include a Monitor Mounting Bracket (Elite, Cinema & Ultimate Packages only), a Follow Focus Setup (available separately), a Second Operator Wireless System (available separately) with joystick control for motorized tilt-axis and pan-axis controls and a Vest Support System (available separately).

Foldable Design for Portability & Efficient Gear-Down

The average gimbal, with its swinging booms, is an awkward device to carry around in between sets. To reduce this bulk for convenient transport and storage, the AllSteady-7 can easily fold flat into a small footprint in seconds without tools.

Now Includes Upgraded Motor Cage and Support Bearing

The importance of support bearing in a caged motor structure is crucial for a jitter free video. Brushless motors are inherently weak on the top side since the internal motor bearings are located only at the base. The AllSteady design implements a 35mm ID / 44mm OD high grade Japanese bearing caged on our patent pending zero slop bearing holder on top of the pan-axis motor. Through years of designing gimbals, we have learned that no brushless motor under load would provide a jello free video without the aid of a support bearing. Due to the importance of this element, we are including this upgrade at no extra charge for all packages.

Foldable Tuning Stand

Designed to complement convenient AllSteady-7 camera and lens changes, this Tuning Stand (Elite, Cinema & Ultimate Packages only) facilitates a stable platform to hang the gimbal for balancing and tuning procedures. By twisting a few thumb screws, operators can now open or fold this device in seconds providing an easy way to transport, set up, gear down and store your balancing station.

An optional industrial grade aluminum carrying case will be available separately in July 2014 with cut-outs for both the gimbal and the stand.

AllSteady-7 Camera Tray Options

Standard Tray Dimensions  for AllSteady-7 Kit, Deluxe & Elite Packages:

  • Tray Width: 177mm Maximum
  • CG to Tray's Bottom: Adjustable to 100mm Maximum
  • CG to Tray's Ceiling: 147mm Maximum
  • CG to Tray's Back: 124mm Maximum
  • Camera Examples: Canon 5D/6D/7D/60D/70D, Nikon D800/E & all DSLR Cameras with equal of smaller dimensions.

Extra Wide Tray Dimensions for AllSteady-7 Cinema Package Only:

  • Tray Width: 230mm Maximum
  • CG to Tray's Bottom: Adjustable to 153mm Maximum
  • CG to Tray's Ceiling: 147mm Maximum
  • CG to Tray's Back: 124mm Maximum
  • Camera Examples: Sony C300+Grip, C500, Red Epic/Scarlet/Dragon, Blackmagic Production 2K/4K, Canon 5D/6D/7D/60D/70D, Nikon D800/E & all DSLR Cameras with equal of smaller dimensions.

Extra Wide Tray Dimensions + Expanded Frame for AllSteady-7 Ultimate Package Only: (If you have already pledged for the AllSteady-7 Cinema Package, you can optionally add a pledge of $2,000 to upgrade to the AllSteady-7 Ultimate Package which includes an expanded frame to facilitates taller and longer cameras and lenses + 3 larger motors upgraded to increase payload from 12 lbs to 18 lbs.)

  • Tray Width: 230mm Maximum
  • CG to Tray's Bottom: Adjustable to 153mm Maximum
  • CG to Tray's Ceiling: 180mm Maximum
  • CG to Tray's Back: 192mm Maximum
  • Camera Examples: Fully Geared Red Epic/Scarlet/Dragon + Quad Battery Module, Sony FS700 & other long dimensioned camcorders, Canon C300+Grip, C500, Blackmagic Production 2K/4K, Canon 5D/6D/7D/60D/70D, Nikon D800/E & all DSLR Cameras with equal of smaller dimensions.

Extraordinary Compatibility & Versatility

If you are using more exotic lenses and gear especially on larger cameras such as the Red and Blackmagic cameras, you will need to consider the total combined Dimension and Payload. For proper balance on the gimbal, the Payload CG (center of gravity) has to be mounted and aligned with the Gimbal CG, the intersection of the projected tilt-axis and roll-axis motor shafts. If you do not have the actual camera, lens and gear on hand to determine the exact Payload CG, you can assume Payload CG is close to the midpoint of all three Payload Dimensions of width, length and depth (Note: If you don't yet have the targeted camera, lens and gear, you can easily look up their corresponding dimensions on-line.). Using the example of a Payload of camera & lens with a total length of 200mm, the Payload CG is located approximately 100mm measured from the back of the camera towards the middle of the Payload of camera & lens. Since the AllSteady-7's standard frame allows up to 124mm from Gimbal CG to Back of Camera Tray (both standard or extra wide camera trays) you will have 24mm (124mm minus 100mm) of spacing to spare behind the back of the camera, providing ample of clearance for the camera to tilt up or down. If your camera & lens is longer than 230mm, you most likely need the AllSteady-7 Expanded Frame (Ultimate Package only) which allows up to 192mm (instead of 124mm on AllSteady-7 standard frame) from the Gimbal CG to Back of Camera Tray. As for accommodating the height and width of Payload of camera, lens & gear, choosing the standard or extra wide AllSteady-7 camera tray options will provide the necessary dimensions to suit your needs. When it comes to calculating a properly sized camera tray, you should always exercise on the side of caution due to accommodations for camera & lens movements (Tray Height & Depth) plus possible connectors and adapters protruding from the camera (Tray Width).

AllSteady-7 MSRP

  • AllSteady-7 Kit: MSRP $3,379.99
  • AllSteady-7 Deluxe: MSRP $4,459.99
  • AllSteady-7 Elite: MSRP $5,229.99
  • AllSteady-7 Cinema: MSRP $5,999.99
  • AllSteady-7 Ultimate: MSRP $9,999.99

Development Process

At the end of the day, our main goal is to offer you a professional gimbal so you can have the freedom to create and frame your shots. Reflecting our core principle in providing the ultimate end user experience, every Turbo Ace product starts with a robust structure utilizing premium parts and components. Then, we load an endless array of versatile functions targeted for different applications. And with meticulous attention to details, we finish each model with ergonomic features that's both practical and visually appealing. From conception to prototype to manufacturing, the Allsteady-7 is an intensive project that has already taken more than 4,000 man hours.

One Year Limited Warranty

AllSteady-7 warranty services and parts support is provided from Turbo Ace's warehouse and showroom located in Orange, California. 

  • 1 Year Limited Warranty on Parts
  • 30 Days Warranty on Parts & Labor
  • 30 Days Warranty on Battery
  • 30 Days Phone Support

Timeline

  • 2008- Turbo Ace founded and manufactures a line of brushless motors.
  • 2011- Began developing aerial platforms with servo-based gimbals
  • 2013- Started transforming the servo-based gimbals to brushless gimbal. Released first hand-held 3-axis brushless gimbal, the AllSteady-1
  • June 2013 - August 2013:  Re-engineered AllSteady-1 gimbal design to support a payload of up to 12 pounds on the AllSteady-7
  • August 2013 - November 2013: Translated concept to form in the 3D Modeling Design Phase
  • November 2013 - December 2013: Selected premium components Completed design and tooling
  • December 2013 - February 2014: Produced AllSteady-7 prototypes and conducted extensive field testing to evaluate and verify strength, functionality, reliability, durability and end user experience.
  • February 25, 2014: Completed video for Kickstarter with the AllSteady-7.
  • March 17, 2014: Implementation of proprietary 35mm/+44mm zero-slop support bearing and motor cage for the pan-axis motor.
  • March 24, 2014: Upgraded both 30mm carbon booms under the AllSteady-7 pan-axis motor for a larger fully integrated battery compartment while strengthening horizontal structures to prevent bounce associated with other leading gimbals.
  • April 2014: Anticipated AllSteady-7 Launch

Optional Features

Focus Controller Package: (Pledge an additional $795)

for single operator Focus Controller for Canon DSLR + Composite 8” Monitor + Cables + Battery + Charger (Compatible with Canon EOS 1D C, 1D X, 1D Mark IV, 5D Mark III, 5D Mark II, 7D, 6D, 70D, 60D, 700D (Rebel T5i), 650D (Rebel T4i), 600D (Rebel T3i), 550D (Rebel T2i), and 500D (Rebel T1i)).

Wireless Joystick Control + Auxiliary Voltage Regulator Package:

(Pledge an additional $799)

  • 10 Channel Devo 10 Transmitter + RX1002 Receiver
  • Wireless Tilt-Axis & Pan-Axis Motorized Controls
  • 3-Way Switch for "Steady", "Full Follow" & "Dedicated Follow Modes
  • Transmitter Battery & Charger
  • Auxiliary 5 Volt 3 Amp Regulator to power additional gear
  • 5 Volt Output Lead for the receiver
  • 5 Volt Output Lead on the camera tray

Wireless Joystick Control + Auxiliary Voltage Regulator

+ Live Stream Video Package: (Pledge an additional $1,495)

  • 10 Channel Devo 10 Transmitter + RX1002 Receiver
  • Wireless Tilt-Axis & Pan-Axis Motorized Controls
  • 3-Way Switch for "Steady", "Full Follow" & "Dedicated Follow Modes
  • Battery & Charger for Transmitter
  • Auxiliary 5 Volt 3 Amp Regulator to power additional gear
  • 5 Volt Output Lead for the receiver
  • 5 Volt Output Lead on the camera tray
  • Composite 5.8GHz Video Transmitter & Video Receiver
  • Turbo Ace 8" Composite Monitor
  • Cables, Converter & Monitor Mounting Bracket
  • Battery for monitor & video receiver
 

Appealing for Your Support

Production of the AllSteady-7 has already begun (Jan 2014), and a successful KickStarter campaign would provide the necessary funds for us to bring the AllSteady-7 into mass production. With your help, we will be able to set up new equipment and acquire the required parts to launch and deliver the gimbals in April 2014. While we ramp up production, early backers will receive a significant discount.

If you have pledged for an AllSteady Kit, you must have experience in building brushless gimbals. We will not be able to assistance you in building the kit, but there will be an online video with detailed assembly instructions. If you have pledged for either the turn-key AllSteady-7 Deluxe, Elite, Cinema or Ultimate Packages, the AllSteady-7 will be assembled, tested and backed with technical support in the USA. We are located in the heart of Orange County near Disneyland. All support and services are provided in-house at our 32,000 square feet facility.

Established in 2008, Turbo Ace has a reputation for delivering cutting-edge products for professional applications. Over the past 8 months, with passion and perseverance, our development team has worked tirelessly to complete the ultimate 3-axis gimbal solution, the AllSteady-7. With experience in developing and delivering our previous model AllSteady-1, we are determined to fulfill your highest expectations of an exceptional new AllSteady-7.

AllSteady-7 Kickstarter Update 1:

Warranty

AllSteady-7 is covered by a 1 Year Limited Warranty. Please see updates for details. * 1 year on parts * 30 days on labor with phone support * 30 days on battery. Our service center is located in Orange, California.

Thank you for your interest, consideration and participation in bringing the AllSteady-7 gimbal to market.

Risks and challenges

With decades of combined experience in manufacturing and quality assurance, the AllSteady team has accumulated an outstanding track record for developing and delivering exceptional products in quantity. It took decades to acquire the knowledge and experience to develop our products and just as long to establish all the resources to procure premium components, produce consistent quality and perform on-time delivery. Turbo Ace’s implementation of strict manufacturing standards and quality control plays a vital role in the continued success of its product lines. The AllSteady-7 gimbal and parts are quality controlled, shipped and serviced through our 32,000 sq. ft. warehouse in Southern California.

Learn about accountability on Kickstarter
Questions about this project? Check out the FAQ

Support

  1. Select this reward

    Pledge $5 or more About $5

    We are anticipating cinema level video production utilizing the AllSteady-7. In response to your interest, we will email you updated information and video links from our production team. Thank you again for your support.

    Less
    Estimated delivery
    3 backers
    $

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge $20 or more About $20

    In addition to emailing you updated information and video links, we will also send you a Turbo Ace Cap. Wear it for work or fun to help us spread the word. Your support and participation will be very much appreciated.

    Less
    Estimated delivery
    Ships to Only United States
    Limited 1 backer
    $

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Select this reward

    Pledge $1,995 or more About $1,995

    ALLSTEADY-7 KIT (VERY EARLY BACKER): 8Bit Processor includes the Unassembled Frames + Motors + Electronics + Battery + Charger. Experience is required to assemble this ultimate 3-axis gimbal using detailed step-by-step online video instructions.

    Less
    Estimated delivery
    Ships to Only United States
    Limited 0 backers
    $

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  4. Select this reward

    Pledge $2,000 or more About $2,000

    Upgrade ALLSTEADY-7 CINEMA to ALLSTEADY-7 ULTIMATE: All 3 motors are upgraded to increase payload from 12 lbs to 18 lbs (The pan-axis motor which carries the most weight is still bigger than the roll-axis & tilt-axis motors) + Expanded Frame to accommodate fully geared Red Epic/Scarlet/Dragon with quad battery module, side handle and larger lenses, Sony FS700 & other long camcorders. Note: This upgrade is only available to existing AllSteady-7 Cinema Package backers to upgrade to the AllSteady-7 Ultimate Package while maintaining their place in line for earlier delivery.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited 0 backers
    $

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  5. Select this reward

    Pledge $2,197 or more About $2,197

    ALLSTEADY-7 KIT: Fast 8Bit Processor includes the Unassembled Frames + Motors + Electronics + Battery + Charger. Experience is required to assemble this ultimate 3-axis gimbal using detailed step-by-step online video instructions.

    Less
    Estimated delivery
    Ships to Only United States
    Limited 0 backers
    $

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  6. Select this reward

    Pledge $2,595 or more About $2,595

    ALLSTEADY-7 DELUXE (VERY EARLY BACKER): Fast 8Bit Processor Plug&Play Gimbal Fully Assembled + Battery + Charger.

    Less
    Estimated delivery
    Ships to Only United States
    Limited 0 backers
    $

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  7. Select this reward

    Pledge $2,597 or more About $2,597

    ALLSTEADY-7 DELUXE (EARLY BACKER): Fast 8Bit Processor Plug&Play Gimbal Fully Assembled + Battery + Charger.

    Less
    Estimated delivery
    Ships to Only United States
    Limited 0 backers
    $

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  8. Select this reward

    Pledge $2,897 or more About $2,897

    ALLSTEADY-7 DELUXE: Fast 8Bit Processor Plug&Play Gimbal Fully Assembled + Battery + Charger.

    Less
    Estimated delivery
    Ships to Only United States
    Limited 0 backers
    $

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  9. Select this reward

    Pledge $2,995 or more About $2,995

    ALLSTEADY-7 ELITE (VERY EARLY BACKER): Ultra Fast 32bit Processor Plug&Play Gimbal Fully Assembled + Stick Control Module + Monitor Mounting Bracket + Folding Tuning Stand + Battery Status LED + Battery + Spare Battery + Charger.

    Less
    Estimated delivery
    Ships to Only United States
    Limited 1 backer
    $

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  10. Select this reward

    Pledge $2,997 or more About $2,997

    ALLSTEADY-7 ELITE (EARLY BACKER): Ultra Fast 32bit Processor Plug&Play Gimbal Fully Assembled + Stick Control Module + Monitor Mounting Bracket + Folding Tuning Stand + Battery Status LED + Battery + Spare Battery + Charger.

    Less
    Estimated delivery
    Ships to Only United States
    Limited 0 backers
    $

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  11. Select this reward

    Pledge $3,297 or more About $3,297

    ALLSTEADY-7 CINEMA (EARLY BACKER): Ultra Fast 32BIT Processor Plug&Play Gimbal Fully Assembled + Extra Wide Camera Tray (for use with Blackmagic Production 4K & Red Epic with Side Handle) + Stick Control Module + Monitor Mounting Bracket + Folding Tuning Stand + Battery Status LED + Battery + Spare Battery + Charger. (This 2nd shipment of AllSteady-7 for EARLY BACKERS will be shipped about 10 days after the 1st shipment delivered for VERY EARLY BACKERS.)

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited 8 backers
    $

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  12. Select this reward

    Pledge $3,897 or more About $3,897

    ALLSTEADY-7 CINEMA: Ultra Fast 32BIT Processor Plug&Play Gimbal Fully Assembled + Extra Wide Camera Tray (for use with Blackmagic Production 4K & Red Epic with Side Handle) + Stick Control Module + Monitor Mounting Bracket + Folding Tuning Stand + Battery Status LED + Battery + Spare Battery + Charger.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited 0 backers
    $

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  13. Select this reward

    Pledge $5,295 or more About $5,295

    ALLSTEADY-7 ULTIMATE (VERY EARLY BACKER): Ultra Fast 32BIT Processor Plug&Play Gimbal Fully Assembled + Extra Wide Camera Tray & Upgraded 3 Motors & Expanded AllSteady-7 Frame (for use with Fully Geared Red Epic/Scarlet/Dragon with quad battery module, side handle & larger lenses, Sony FS700 and other long camcorders, Blackmagic Production 4K) + Stick Control Module + Monitor Mounting Bracket + Folding Tuning Stand + Battery Status LED + Battery + Spare Battery + Charger.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited 3 backers
    $

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  14. Select this reward

    Pledge $5,297 or more About $5,297

    ALLSTEADY-7 ULTIMATE (EARLY BACKER): Ultra Fast 32BIT Processor Plug&Play Gimbal Fully Assembled + Extra Wide Camera Tray & Upgraded 3 Motors & Expanded AllSteady-7 Frame (for use with Fully Geared Red Epic/Scarlet/Dragon with quad battery module, side handle & larger lenses, Sony FS700 and other long camcorders, Blackmagic Production 4K) + Stick Control Module + Monitor Mounting Bracket + Folding Tuning Stand + Battery Status LED + Battery + Spare Battery + Charger.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited 1 backer
    $

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  15. Select this reward

    Pledge $6,297 or more About $6,297

    ALLSTEADY-7 ULTIMATE: Ultra Fast 32BIT Processor Plug&Play Gimbal Fully Assembled + Extra Wide Camera Tray & Upgraded 3 Motors & Expanded AllSteady-7 Frame (for use with Fully Geared Red Epic/Scarlet/Dragon with quad battery module, side handle & larger lenses, Sony FS700 and other long camcorders, Blackmagic Production 4K) + Stick Control Module + Monitor Mounting Bracket + Folding Tuning Stand + Battery Status LED + Battery + Spare Battery + Charger.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited 0 backers
    $

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  16. Reward no longer available

    Pledge $3,295 or more About $3,295

    ALLSTEADY-7 CINEMA (VERY EARLY BACKER): Ultra Fast 32BIT Processor Plug&Play Gimbal Fully Assembled + Extra Wide Camera Tray (for use with Blackmagic Production 4K & Red Epic with Side Handle) + Stick Control Module + Monitor Mounting Bracket + Folding Tuning Stand + Battery Status LED + Battery + Spare Battery + Charger.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Reward no longer available 25 backers
    $

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.

Funding period

- (30 days)