Strawbees, a fantastic prototyping toy for makers of all ages. Build huge mechanical objects from standard straws and cardboard!
Thanks to all our backers for making Strawbees a reality!
Funding has ended on Kickstarter, but you can visit www.strawbees.com to order your Strawbees and start building your own huge contraptions.
Strawbees is a construction kit based on one simple unit that lets you connect straws to each other. You stick a Strawbee into the ends of a standard quarter inch (6mm) straw to make struts and then connect them with another Strawbee.
It's a wonderful system for trial and error construction and allows you to do a lot of things impossible with other systems.
With the Strawbees you can build everything from mathematical shapes like the platonic solids to mechanical birds, claws, or even huge animated snakes.
Just come up with an idea and start building, or simply start building and see where you end up. With the Strawbees you can always modify things as you go, add straws, cut straws, or add new connections to get a stronger, more flexible or bigger construction.
The claw above is made by searching for crabs claws on Youtube and image search on Google. That was enough to reverse engineer a claw with the strong muscle being a human hand and a rubber band for the weak opening action muscle.
Besides connecting straws the Strawbees can be used to connect cardboard. This means you can build large scale mechanical objects from cardboard with the same pieces you use for the straws.
These kickstarter kits are in an early stage and will not feature any instructions, instead we are going to post instruction videos on already available video sharing and instruction platforms. But the best part is that you don't really need any instructions to get started, just look at a mechanical object and try to reverse engineer it. We can't wait to see what you build!
The Strawbees act as a pivot point and as a connector to join straws. Take a quarter inch straw, add Strawbees to make a strut. Continue adding Strawbees to get as many legs as you want in the vertices.
Connecting cardboard is as easy as connecting straws, just make a hole with a regular pencil and then join them with Strawbees. If you run out of straws, you can always find some cardboard to build huge objects with. The standard Strawbees connects two normal layers of cardboard, but maybe you can figure out a way around this.
We have let kids from the age of five play with the strawbees and have found it suitable not only for them but for makers, engineers and creatives of all ages and fields.
Actually it seems to appeal to anyone who wants to build big flexible structures, and who doesn't? We had a great time at M.I.T. where we had an afternoon workshop full of open ended construction play.
Strawbees are great for imaginative play, why not make a strange dog shaped thing? Or go high tech and construct a flex sensor controlled mechanical finger?
All pieces are connected with strawbees, even the servo and lever. There are always many different of ways of achieving the same thing and it's a truly open ended construction kit. It is also very hackable as you can modify the connector with a regular pair of scissors.
This combination of flexibility and iterative construction makes Strawbees perfect for fun and engaging STEM education activities at any level, from preschool to university engineering studies of both statics and dynamics. One feature for the higher studies is that the straws are weak enough that they bend under pressure, which makes it possible to visually inspect structures you have built to see how the applied load is distributed up until the breaking point. We think science education should be fun and believe this system really allows you to play your way to knowledge.
We are also co-founders of the global initiative www.kidshackday.com where we combine programming with construction activities and the Strawbees offer a great way to get things out of the computer into the real world in a large scale. The constructions are so light weight that a simple micro servo is enough to control even the biggest structures.
To help us get this out to more people, and let you get your hands on them before everyone else wee have devised the following fantastic pre-launch Strawbee kit rewards. The retail version of Strawbees will not be available until this fall, so be part of the beginning of this new toy and help us make it even better with your creations!
NOTE: WORLDWIDE SHIPPING INCLUDED IN KIT PRiCES!
(except for Infinite Kit and workshops)
When we designed the Strawbees, we didn’t really know exactly what we were doing. It was when our DIY clothespin was used as a construction toy by kids in India we figured that maybe we should try designing a real construction toy.
Our goal was to make a connector everyone could afford that could be made using commonly available scrap materials and preferably in one of our manual die cutting machines from Accucut.
One day at a public workshop at the Science Center Universeum in Gothenburg the organizers asked us if maybe we could come up with something smarter than the fragile connectors they had been using for some maths activities, a fully proprietary system with proprietary straws. That's when we started playing with regular straws, and found that the quarter inch straw is one of the most common dimensions.
All of a sudden this little thing appeared and after some tweaking we had developed what seemed to be the lowest common denominator for the joints of most polygon structures. We had to try building a geodesic dome.
Since then we have been trying it out inhouse, modifying it a couple of times and we have made four different tools and thousands of prototypes.
We have done test runs at five schools here in Sweden and more than five science centers around the world to make sure it works.
We have also tried the Strawbees at public workshops and visited NY Maker Faire where we got a lot of positive reactions but most importantly young maker Chris Hodges came up with the brilliant name. A lot of people wanted to get their hands on them, but we weren't ready back then. Now we feel it's time to let it out into the world. We need your help!
During the kickstarter we will develop the prototype packaging to suit the production sheets of Strawbees. Production tools will be ordered immediately after a finished kickstarter ends and we will get the production set up for when they arrive. We will pack & ship continuously during the production so shipping will be spread throughout April.
Risks and challenges Learn about accountability on Kickstarter
We have a couple of successful product launches behind us such as www.ass-savers.com but are still a struggling startup team and have never attempted to get into the very tricky business of making educational toys so we have some issues to address.
We are confident about reaching the march launch with a custom prototype packaging, but the big organization that is needed for instructions and a massive world wide launch is not there.
We have three years experience with production in PP sheets so we have most of the production chain sorted out already, the only challenge is to get as many pieces per sheet as possible but still have the machines cut trough cleanly. Worst case scenario is having to modify the tool to suit the machine we use which could delay us up to a week, but it would still allow shipping within the set schedule.
The second issue is to be able to pack & ship the product efficiently, which really is the biggest unknown and affects the total amount of pieces in a kit. Hopefully we have done our research and sorted this out, but it's the first time we are doing this many pieces per kit so we are on our toes ready for tweaking this process.
The Strawbees are designed to fit in 6mm or quarter inch straws. They can squeeze in to slightly smaller straws and can be locked onto slightly bigger straws too.
Global shipping is included in the pledge amount for all kits except for the Infinite kit. Shipping is included in the Infinite Kit but only within the U.S.
Yes! You can use a kit of Strawbees over and over again, just take apart the constructions one Strawbee at a time.
They are super durable and will last a long time even though they can look worn with time. You need a pair of scissors or a knife to destroy them unlike other geometric building systems.
Because it would cost three times as much due to shipping and handling. We want this to be super accessible and inexpensive so we built it around standard straws. A very good source for these 6mm straws are restaurant suppliers, food trucks and in Sweden a chain called TGR. We are going to make it possible to share good local 6mm drinking straw suppliers to the community on our coming website.
100 straws at CWS in the US costs about 1 $.
Yes, they think it is almost as fun as building with the pieces. It's like making shapes in clay or something, and then being able to play with them. Fascinating!
Yes, but not until sometime this fall. The retail version will support our coming education program Let's Science which I hope you will be equally excited about.
The Strawbees are produced in Gothenburg, Sweden. The machines are made in the United States in collaboration with Accucut. It is amazing to be able to make a toy with full workers rights throughout the production to packing and shipping. So this is a made in Sweden and the US project!
The Strawbee pieces are made of the best possible Polypropylene plastic sheets, and as much as possible is made from recycled plastic. We are going to increase the percentage of recycled plastic in our products continuously to be part of a technical closed loop.
seconds to go
Pledge $5 or moreYou selected
First of all you'll get a big thank you for supporting the project! If we reach more than 500$ in pure donations Erik will sing Yoyoy Villames classic hit Butsekik and post it on Youtube. If we reach more than 1000$ he will do the same but dressed only in Strawbees.Estimated delivery:
Pledge $15 or moreYou selected
200 backers All gone!
TRY BEFORE YOU BUY KIT: Features more than 40 connectors in one random color. Enough pieces to build things like morphables, boomerangs and umbrellas!Estimated delivery:
Pledge $25 or moreYou selected
MAKER KIT: Features more than 100 connectors in two random colors with which you can start exploring bigger constructions. Try out some mechanics or just build freely.Estimated delivery:
Pledge $40 or moreYou selected
200 backers All gone!
EARLY BIRD INVENTOR KIT: More than 300 pieces in three random colors. Build a bridge, or a huge mechanical snake. Enough pieces to start inventing really cool stuff.Estimated delivery:
Pledge $50 or moreYou selected
INVENTOR KIT: More than 300 pieces in three random colors. Build a bridge, or a huge mechanical snake. Enough pieces to start inventing really cool stuff.Estimated delivery:
Pledge $80 or moreYou selected
TESLA & EDISON BUNDLE: Get two new inventors going with TWO color separated INVENTOR kits so you can identify the kits by color when construction time is over.Estimated delivery:
Pledge $80 or moreYou selected
200 backers All gone!
EARLY BIRD CRAZY SCIENTIST KIT: More than 800 pieces in four random colors. With this kit you can build all the things in our videos and more. Start creating your own mad scientist lair full of weird and wobbly inventions.Estimated delivery:
Pledge $100 or moreYou selected
CRAZY SCIENTIST KIT: More than 800 pieces in four random colors. With this kit you can build all the things in our videos and more. Start creating your own mad scientist lair full of weird and wobbly inventions.Estimated delivery:
Pledge $170 or moreYou selected
24 backers Limited (76 left of 100)
ALL YOUR KIT ARE BELONG TO US: You are on the way to construction! This is for all of you who can't choose and want ALL of the first edition Strawbees kits (except the Infinite Kit). This ultimate collectors bundle comes with 1 x TRY BEFORE YOU BUY KIT, 1 x MAKER KIT, 1 x INVENTOR KIT and 1 X CRAZY SCIENTIST KIT. Also comes with a signed poster from the Creatables team.Estimated delivery:
Pledge $350 or moreYou selected
9 backers Limited (41 left of 50)
INFINITE KIT WITHOUT MACHINE: This offer is for all US customers who already own a compatible ACCUCUT machine (MARK III, MARK IV or Grandemark). Now you too can collect materials and recycle them into Strawbees at home or at school. The Infinite Kit will feature new improved tools that cut multiple pieces at a time. This way you can make as many connectors as you want. You are never going to run out of Strawbees! Just like the other Infinite Kits this includes a big starter pack of Strawbees.Estimated delivery:Ships within the US only
Pledge $600 or moreYou selected
9 backers Limited (1 left of 10)
EARLY BIRD INFINITE KIT: This offer is for US customers only and is what we lovingly call the Infinite Kit. Collect materials and recycle them into Strawbees at home. The infinite kits will feature new improved tools that cut multiple pieces at a time. This way you can make as many connectors as you want and you are never going to be out of Strawbees! The kit is made in the US and produced in collaboration with ACCUCUT so everything is of really high quality. Each infinite kit includes a big starter pack of Strawbees.Estimated delivery:Ships within the US only
Pledge $700 or moreYou selected
3 backers Limited (197 left of 200)
INFINITE KIT: This offer is for US customers only and is what we lovingly call the Infinite Kit. Collect materials and recycle them into Strawbees at home. The infinite kits will feature new improved tools that cut multiple pieces at a time. This way you can make as many connectors as you want. You are never going to be out of Strawbees! This kit is made in the US and produced in collaboration with ACCUCUT so everything is of really high quality. Each infinite kit includes a big starter pack of Strawbees.Estimated delivery:Ships within the US only
Pledge $700 or moreYou selected
1 backer Limited (9 left of 10)
INFINITE KIT EUROPE: This offer is for European customers only. Add 200$ in shipping costs and you too can collect materials and recycle them into Strawbees at home or at school. The infinite kits will feature new improved tools that cut multiple pieces at a time. This way you can make as many connectors as you want. You are never going to be out of Strawbees! This kit is made in the US and produced in collaboration with ACCUCUT so everything is of really high quality. Each infinite kit includes a big starter pack of Strawbees.Estimated delivery:Add $200 USD to ship outside the US
Pledge $1,100 or moreYou selected
0 backers Limited (10 left of 10)
GENTLEMAN AND A SCHOLAR KIT: This offer is for US customers only and features two infinite kits, one for you and one for a school of your choice within the US.Estimated delivery:Ships within the US only
Pledge $1,800 or moreYou selected
1 backer Limited (9 left of 10)
UNFORGETTABLE SCIENCE WORKSHOP: This offer is for New York, San Francisco and Sweden only and features a very exclusive, at your chosen location, workshop with Erik from Creatables. The workshop also includes an infinite kit and spans over one day where you learn how to use the Strawbees and the machine to build awesome stuff. Don't miss your chance to create some fantastic science chaos to inspire students or coworkers. The workshop can be public, at school, at the office or at home. Everything works as long as you arrange for transportation within Sweden, New York or San Francisco. Timing will have to be synchronized with one of Erik's trips to the US this year. Send a message if you are interested and want to know more.Estimated delivery:
- (29 days)