€16,948
pledged of €6,000pledged of €6,000 goal
195
backers
3days to go

All or nothing. This project will only be funded if it reaches its goal by Thu, December 13 2018 7:00 PM UTC +00:00.

€16,948
pledged of €6,000pledged of €6,000 goal
195
backers
3days to go

All or nothing. This project will only be funded if it reaches its goal by Thu, December 13 2018 7:00 PM UTC +00:00.

About

This campaign only contains digital models. If you do not own a 3D printer and are interested in the physical model versions shipped to your door, these will be available early 2019. Please subscribe below to receive an email alert when this are released.

The campaign is huge by standards and as such we have split it up into categories. We offer Dragons, Heroes, Regiments and Terrain, below you have a more visual breakdown of what is available.

So let us begin, let me show you through our wares, lets start with Dragons... 

                                                                                         

Printing Dragon Body Video

 Printing Dragon Wings Video

   

 We have included 5 different dragons. Each dragon has 3 versions which are specially thought out for different modes of game play. We have included a 'Wargames', a 'RolePlay', and a 'Diorama' sculpt for each dragon. Pledge for '66€ Dragon Hoarder' and get all the dragons plus all the stretch goals.

 WARGAMES VERSION   

The Wargame version is meant to be used in tabletop battles along with other fantasy armies and regiments. These models are more pose constricted and carry a compatible wargame square base.  

ROLEPLAY VERSION  

The Roleplay version has a larger circular base and has a unique dynamic pose for each dragon, that is meant to be used when roleplaying with your RPG party. The dragons are sculpted without armor or harnesses as found natural in wilderness or dungeon.  

DIORAMA VERSION The Diorama is the most dramatic and dynamic of all the sculpt types and shows the dragon mid scene interacting with its environment. This model can be used in games, but it is meant for the modeller or painter that wishes to immortalize a scene on his mantle piece.   

FDM & SLA Samples
FDM & SLA Samples

Dwarf Regiment 

The dwarf regiment comes with 2 command figures, a standard bearer and a musician. The 'Hero' pack above contains 2 additional figures, a dwarf hero and commander. There are 6 unique posed infantry miniatures to choose from bearing different weapons and combat styles.

IMPERIAL REGIMENT   

The Imperial regiment comes with 2 command figures, a standard bearer and a musician. The 'Hero' pack above contains 2 additional figures, a dwarf hero and commander. There are 6 unique posed infantry miniatures to choose from bearing different weapons and combat styles.   

Add-on to your current pledge to receive the reward after the campaign through our pledge manager. Example: current pledge 66Euro Dragon Hoarder + 88Euro for Jungle Fever = Total pledge 154Euro.

88€ Jungle Fever 

Check Kickstarer here: Jungle Fever.  

88€ All Roads Lead to Rome 

Check Kickstarter here: Rome.

 project video thumbnail
Replay with sound
Play with
sound

Dwarf War Blimp

All unlocked stretch goals will be rewarded with the pledging of any amount over 66 Euro(Either in Digital or Physical or both). The stretch goals will be slowly revealed as the project grows with your pledges.  

Each stretch goal will highlight the benefits towards Digital and Physical offers. Generally Digital stretch goals will be Freebies, whilst Physical Stretch Goals will offer models at a very discounted price, ready for 'Add-on'.

New stretch goals will be added along with renders and extra descriptions, so be sure to come back and review this page during its run. 

Make sure to spread the word and help us gain more backing so you can benefit from all the extra designs available through the stretch goal program. 

Renders and details for each individual goal will be included as the funding increases.

Live Streaming on December 4th  

Interview with Matt from Uncle Matt's RPG Studio

                    

 Chris Spotts (The spotted Painter

 project video thumbnail
Replay with sound
Play with
sound

 Work for Half-orc Printing 

Credit &Thanks  

Paul Deeming (WOWBuildings)

We want to bring Paul Deeming to the attention of the backers. Paul has contributed much to this Kickstarter in terms of ideas and support. He prepared the main structure for the bridge model in 'Bridgeton' and 'The Tower Keep' piece. Apart from this he has contributed many of his own pieces so that I may re-master and present them as stretch goals in this Kickstarter, as co-sculpted editions of his work. Paul Deeming and Iain Lovecraft pieces, a Co-sculpting first for the 3D Printing community.

Paul Deeming is a very talented modeller who has a keen eye for architecture and emulating it in 3D. We have learnt from him that it is always best to over deliver on your kickstarters, something which he has done repeatedly on all his projects.

Daniel Herrero (3D Printed Tabletop)

I started work on this project after my last 'Rome' kickstarter and Daniel Herrero approached me about the Dragon models I was previewing on my Facebook Page. He told me he had a similar idea for a unique Dragon project, That´s how Lost Dragons and Riders of the Storm came about. It was great to work with Daniel in the ´Lost Dragons´ project and Daniel and I saw that the Riders project would compliment each other well. Daniel refrained from producing any 'Mounted Dragons' on his project to allow for my Riders Kickstarter, even though he had had plenty of demand for this. So there was definitely a co-inspiration and now a follow through from Dan´s project to this one.

Eric Lyse (Half-Orc Printing)

Marc Chabot (RM Studio Terrain)

Keith Barnett, Modelling and Painting.

Chris Spotts, Modeling, Painting and Photography.

Michal Zajac, Miniature Painting.

Maximilian Bügler, Modelling and Painting.

Risks and challenges

This is our forth Kickstarter and with three successful Kickstarters under our belt, so we are well versed with Kickstarter ways and envisage no problems.

Delivery dates are a rough guideline and we will always try to deliver before the estimated date proposed.

DIGITAL MEDIA:
We strive to produce models that will print with as little support and parts as possible. Some models print in one go whilst most are split up into parts which must be printed separately and then assembled.

The file format of choice will be .STL and the models shall be zipped and made available to the user for download. The user is responsible for downloading their product and must have a valid internet connection and email with which to collect their reward, via internet download. We will keep the files on our system for at least three months after the first date of issue. The user must ensure that he collects the files within this time frame or risk forfeit.

Backers must realize that the resolution you obtain on your print is down to the system you use. Our high resolution files will give you almost render quality prints on high end SLA machines, whilst the same files will produce lesser resolution prints on standard FDM printers. At any rate, all the files have been previously tested on SLA and FDM printers and have shown satisfactory produce.

We recommend FDM Prints with at least a 400micron nozzle and 200 micron layer height for terrain. A 100 micron layer height will give you outstanding prints all round. We have also tested the files with larger nozzles, at 500 microns and decent results are possible on most prints, if the layer height and temperature is controlled correctly. 0.5(500 micron) nozzles are not recommended for miniature printing.

SLA printers should have no problems obtaining excellent resolution and finish even at 100 micron layer height although 50 micron layer height is recommended for minute sculpt detail clarity. We will try our best to split models so they will fit in smaller print beds like those found on SLA machines. Although miniatures and figurines can be split into smaller parts, large terrain pieces will require a standard 200x200mm print bed.

We supply the user with a design that has been tested on conventional home hobby printers and is proven to print.

When using our digital media, we do not hold ourselves responsible for the production or manufacturing process of the design, this is exclusively up to the user.

Users may modify models and files at their own risk and only for their own personal use. Modified files are not guaranteed by us and as such, users do this under their own risk and know how.

A production run is expensive and as such, in the event that a particular model or product does not obtain the necessary demand/volume of orders for satisfactory production, we reserve the right to remove said product from our campaign. A full refund (through Kickstarter) will be given to the backer, in the event that pledges have already been funded.

The Images shown on the campaign page are just for visualization and although they may come very close, they are not an exact representation of the final design or printed model, which may vary.

We reserve the right to alter any of the models shown, at any time, before delivery, with the intent of improving the design, or efficiency of production.

Learn about accountability on Kickstarter

Questions about this project? Check out the FAQ

Support

  1. Make a pledge without a reward

    About $11
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge €1 or more About $1.14

    Add-On

    Select this pledge and add-on the total amount for the products that you wish to receive. When the campaign ends you will be able to choose the products of your choice using our pledge manager to complete the order.
    Delivery for digital files estimated, February 2019.
    Delivery of physical models estimated, 8 to 12 months.

    Less
    Estimated delivery
    34 backers
    About $1.14
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Select this reward

    Pledge €44 or more About $50

    Printer And Commander

    Get the Dwarf and Elf regiments with the the Hero pack miniatures. Digital Format

    Includes:
    • 8 piece regiment (Digital)
    • Heroes Pack 8 x Miniatures (Digital)
    Less
    Estimated delivery
    1 backer
    About $50
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  4. Select this reward

    Pledge €44 or more About $50

    Bridgeton

    Get all the models to build Bridgeton.

    Includes:
    • Bridgeton modular bridge and house pack (Digital).
    Less
    Estimated delivery
    23 backers
    About $50
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  5. Select this reward

    Pledge €66 or more About US$ 75

    Dragon Hoarder

    Get all 5 Dragon sets with their corresponding 3 versions: RPG, Wargame, Diorama, for a total of 15 dragon models. Digital format.

    Includes:
    • Dragon Set (Digital)
    Less
    Estimated delivery
    17 backers
    About US$ 75
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  6. Select this reward

    Pledge €66 or more About $75

    Landlord

    All the buildings in the core pack plus stretch goals.

    Includes:
    • Bridgeton modular bridge and house pack (Digital).
    • House of Hookah
    • Tower Keep
    Less
    Estimated delivery
    45 backers
    About $75
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  7. Select this reward

    Pledge €132 or more About $151

    All In Digital

    All the digital files for all the models on this campaign. Plus stretch goals.

    Includes:
    • Dragon Set (Digital)
    • 8 piece regiment (Digital)
    • Bridgeton modular bridge and house pack (Digital).
    • Heroes Pack 8 x Miniatures (Digital)
    • House of Hookah
    • Tower Keep
    Less
    Estimated delivery
    67 backers
    About $151
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  8. Select this reward

    Pledge €450 or more About $512

    Commercial License

    Get a year-long royalty free license to commercially 3D print and sell items from this current 'Riders Of The Storm, plus stretch goals.

    Includes:
    • Dragon Set (Digital)
    • 8 x Hero Miniatures (Digital)
    • 8 piece regiment (Digital)
    • Bridgeton modular bridge and house pack (Digital).
    • House of Hookah
    • Tower Keep
    Less
    Estimated delivery
    2 backers
    About $512
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.