fuel - free engine
fuel - free engine
Fuel-free engine for power generation with capacity up to 10 kW/h.
Fuel-free engine for power generation with capacity up to 10 kW/h. Read more
About this project
Consist of two parts:
1. fuel free engine
Overall dimensions: Europe: 1х0.5х0.7 m. USA: 3.2х1.6х2.2 ft.
Weight: Europe: up to 20 kg. USA: up to 44 pounds.
Magnetic field: harmless (100%) .
Noise factor: up to 40 dB.
Connection: single and tri-phase
Estimate time for accomplishment: 5-6 months.
Measurements for the USA.
Measurements for the Europe.
We‘d like to thank to those people who help realize ideas and projects on Kickstater. If we, I mean people, stopped to understand each other, we wouldn’t have such projects to support. That’s why we decided to post our project version of fuel-free device for power generation with capacity up to 10 kW/h (electric generator with unlimited place of appliance).
Note: The prototype has not been assembled yet but we are about to do it. At the moment we have completed schemes, calculations and charts. To protect our copyright we have not shown full charts.
Fixed fuel-free engine consist of set quantity of permanent magnets on the plate, along with isolating core with one hole in the middle; holes and magnets arranged in such a way that the flow intercepting is happened in the hole because of permanent magnets. The first plate is placed around the isolating core to create a bias flux from the permanent magnets. The second plate goes around the holes penetrating through the first plate to intercept magnetic flux and take out work output. Swirling magnetic fields displace magnetic flux of the permanent magnets in the space between the openings in the first plate, thereby causing a rotational force along the second plate. Here we can see mechanical rotation of fuel-free generator, which is connected with an electric standard generator by means of clutch.
The fuel-free generator shows the way to generate electric energy using fixed components. It is well known that changing of the magnetic field can put in motion and generate an electromotive force. In this case, the topology of magnets allows the magnetic fields to interact in a certain way, causing the capacity to do some work. It is also well known that if stress load connects to the circuit, an opposing force that slows the rotor (first plate), will appear. To overcome this force it is required to apply additional mechanical energy that is proportional to the obtainable electric power. Therefore, it is necessary to create a changing magnetic current through the second plate correctly to control these currents and mechanical motion using a particular topology. Rotating electrical currents in the materials that maintains for fixed term in accordance with bright-line rules of quantization are the source of magnetism in permanent magnets. As a result, each atom emits a magnetic field, as a miniature electromagnet. This atomic current exists not only in magnets, but also in any element in the metal alloy. Permanent magnets have a rigid magnetic orientation of the axis in each atom. Therefore it is called "permanent". This fuel-free generator simulates the movement of magnets and magnetic fields, without using mechanical effects or moving parts to produce electricity through a generator.
It all started when my friends complained that a lot of electricity had been consumed in their apartments. And those who live in houses spend a lot of money on energy consumption. Yes I do know that on my own. Every day I face with a variety of innovations in all spheres of life and then I decided to think it over how I could solve this problem for themselves, and for those who are interested in saving energy and money, like me.
I knew it would be difficult to cope with this problem by myself. That's why, I asked my friends who are also concerned about the problem of economy to help me. We decided to develop a project about power generator, the power of which would satisfy both our everyday household needs and at the same time didn’t require any additional costs for gasoline, diesel fuel, frion etc. But there can be such situations in our life when either there is simply no opportunity to buy a particular type of fuel for some reasons, such as lack of resources, or fuel is not sold wherever you want ... There can be a lot of reasons, but there are too much troubles, and it is not worth it.
With common efforts we thought out the idea to make a device that would generate electricity continuously, excluding additional material of investment. Also the power of this device will produce as much electricity as we need for heating, lighting, cooking and for any household needs. Taking in consideration the above, the electric power should be at least 10 kW/h. As a result, we decided that our generator should be cost-effective, easy to operate, generate electricity without fail, small-sized and mobile as well. Therefrom, we came to conclusion to develop electric motor, based on the phenomenon of magnetism.
The drafts and schemes have been fully completed. The power generator consists of two parts – a fuel free engine and a generator. Overall dimensions: 1x 0.5x0.7 m. The weight of this device is only 20 kg. As for magnetic field radiation it is absolutely harmless and environmentally friendly. The noise level is up to 40 dB. We need not more than 1 year to produce this device. But we hope that 5-6 months will be enough.
Fields of application:
• As a source of electricity;
• Private housing for domestic needs;
• Places of non-supply of electricity;
• Heating and air conditioning of the house;
• Industrial sites, homes, cottages, apartments, shops, hospitals, so there can be mentioned various place of use.
And the most important thing is that its application area is unlimited.
Its advantages over other electric generating devices:
• environmental friendliness
• alternative to classical power system
• single and three phase connection possibility
• economically proved
• portable (wheeled)
• breaker less work
In fact, we think the idea of making such a power generator is of interest at this time. Nowadays people are trying to find a bare possibility whatever to save. Thinking this idea over, we realized that the device should be intended either for an average citizen, or for businessman with small production volumes (building, mini-bakeries, small sewing shops, cafes and restaurants, etc.).
Moreover, we have no doubt that as soon as this device will be on sale, people will start to use it, then we don’t need to advertise it, because those who have already convinced of its quality and efficiency would advise it.
Firstly, it is very important that this is a mobile generator and it is not very heavy. By this means you can take it to your country house, to picnic, etc. at any time and be confident in your own comfort anywhere. Secondly, it is compact which means that you don’t need a lot of place for it even in a small apartment. It is almost silent, which means that it won’t interfere with the basic domesticities. Need to swap? This device has special wheels. You can put it wherever you want. It is also environmentally friendly, for example, it can provide electricity for the whole apartment, and won’t bring any harm in this case, because we all heard about the harm of various electrical devices, as much as mobile phone, toaster, TV and even a fridge.
We have no doubt that after realizing this project, we can save money for many social group. Then, we are planning to make this device affordable for everyone.
To create a functional prototype with high quality work under laboratory conditions it is a complicated and laborious process that requires additional resources, human resources and financial investments.
To realize this project we need about $300,000. These means will be invested in the development of the project and generator building. We need to buy requires to produce high-quality materials, involve human resources for the parts fabrication included in this device and start to manufacture and build the electric generator, as well as its testing in the laboratory. We assumed that we need 5-6 months to realize our project.
I want to add that this project is necessary one. This device does not require any additional costs. Once you bought it, use it as much as you want. I wish such generator would be in every house, in every apartment and would give people the light, warmth, joy and thought that the question of saving on electricity is no longer there.
If you have any questions contact us on Facebook:
Katerina Skachko - https://www.facebook.com/profile.php?id=100008350005978
Alex Lorentsev - https://www.facebook.com/aleksandr.lorentsev
Eugene Fedorenko - https://www.facebook.com/eugene.fedorenko.5
Risks and challenges
There may be any errors in the project development during 6 months fabrication of electric generator in continuous mode, which will be removed at once. And then testing of the generator will continue till perfect condition.
Fabrication break often happens during process.
We will try to take all this into account in our 6 months terms. But if suddenly we face a serious problem that affects terms of realization, our backer will be informed and we will continue fabricating.
Our task is to make qualitative electric generator and qualitative prototype for our backers. We want lighting and warmth to be in every house, because this is important aspect for our life aside from terrain and weather conditionLearn about accountability on Kickstarter
Support this project
- (31 days)