January 27, 2016
The printable models for ATLAS 3D are now available on Thingiverse at http://www.thingiverse.com/thing:1280901. Thingiverse offers an unique environment including real-time 3D previews and downloads of all the models.
Uriah Liggett
October 14, 2015
ATLAS 3D and the new Kit Enclosure are on sale now in the Murobo store - http://store.murobo.com
October 1, 2015
It was quite a journey but we made it! All of the ATLAS 3D kits that we received address information for have been shipped aside from only a... Read more
September 2, 2015
Last week 500 more lasers came in and we have been shipping ATLAS 3D kits out in a hurry! Already, they are arriving at homes, kits are being assembled, and... Read more
August 25, 2015
The next batch of 500 lasers came in today. This is enough for 250 more kits and will take us through all of the remaining Core kits and into the... Read more
August 20, 2015
We have received word from the supplier that 500 more lasers will be shipped to us next Tuesday and the remainder a week thereafter.
August 18, 2015
I spoke to the laser supplier today and they have roughly 150 lasers that they will ship out right away but are still determining the time table for the rest.
August 15, 2015
Patient Backer,
The lasers were supposed to have arrived on the 10th and did not show up. This was quite surprising to me because I had been in near constant... Read more
August 6, 2015
I received an update from the laser supplier that the final shipment of lasers should arrive on the 10th of this month. This shipment has enough lasers for all of... Read more
July 15, 2015
These lasers have full length lead wires thus eliminating the possibility of bad crimp connections and they also feature a... Read more
June 26, 2015
The promised delivery date from the laser supplier has come and gone, so I contacted them again. The lasers are custom tailored for ATLAS 3D and this caused an unexpected... Read more
June 15, 2015
The batch of lasers did not come in when expected so the Friday shipments have not gone out yet. I have contacted the supplier and he assures me that it... Read more
June 6, 2015
We are still on schedule and things are moving along very rapidly here. All of the April and May kits have been sent out. If you... Read more
May 17, 2015
Version 1.5 of the ATLAS 3D software (FreeLSS) has been released with the changes listed below. Backers of ATLAS 3D that are using the supplied SD card or downloadable SD... Read more
May 3, 2015
We have begun shipping the April rewards. If you are an April backer you should have received a survey to input your shipping information. Please complete it... Read more
April 19, 2015
The video assembly instructions have been completed. These instructions guide the backer through the full assembly of the ATLAS 3D scanner. It is included below and on... Read more
April 5, 2015
March 23, 2015
March 18, 2015
Our friends at soliforum.com have created a public forum for the ATLAS 3D and FreeLSS community. Feel free to submit posts related to ATLAS 3D hardware, software, and configuration there.... Read more
March 10, 2015
March 9, 2015
The first batch of 650 stepper motors have arrived today securely packed in form fitting foam in boxes of 60 motors apiece. Everything seems OK with them so far but... Read more
March 8, 2015
The first batch of laser line modules have arrived. However, there is an issue with the quantity. We have only received 200 of the 500 lasers that were ordered. I... Read more
March 4, 2015
February 24, 2015
The Kickstarter names of the ATLAS 3D backers has been listed on a thank you page of the murobo.com website. Please message me if you would like your name edited... Read more
February 22, 2015
February 17, 2015
As noted in the previous update, numerous enhancements were made to the ATLAS 3D mainboard design to make it easy to install. I have received an initial... Read more
February 8, 2015
Everyone,
A new version of the ATLAS 3D software, FreeLSS, has been committed to Github at https://github.com/hairu/freelss. It includes the changes outlined below.
February 6, 2015
February 5, 2015
We did it! ATLAS 3D has surpassed the $200K pledge amount and has made available the 3rd and final stretch goal, Real-time Scan Preview. This is a software feature will... Read more
February 3, 2015
Yesterday, the Raspberry Pi foundation announced the Raspberry Pi 2, a newer version of the Raspberry Pi that is supposedly much faster than the original and with twice the... Read more
January 30, 2015
January 25, 2015
ATLAS 3D has surpassed the $150K pledge level, and has achieved Stretch Goal #2: Video Assembly Instructions. In addition to assembly documents, video assembly instructions will be... Read more
January 22, 2015
I have uploaded a few ATLAS 3D scans taken with different quality levels. For the dog and the orc models, little-to-no post processing was done (just Poisson reconstruction) to give... Read more
January 19, 2015
ATLAS 3D has just crossed the $120K amount. By achieving Stretch Goal #1, the Autoupdate Feature will be included as part of every Full Kit. Backers of the BYOP Kit... Read more
January 15, 2015
Our backers have spoken up and made it clear that they want to print ATLAS 3D on a wide variety of printers. As a result, support has been extended to... Read more
January 13, 2015
From the start, ATLAS 3D was designed to be a completely open product. One where the community had a say in the direction that it takes. I asked the ATLAS... Read more
January 10, 2015
January 8, 2015
I've just updated the FAQ with the most frequently asked questions of the day. Stop on over and have a look.
We reached the target goal within hours and blew right past it! A huge thank you to all the backers. I can't wait to start ordering parts and posting pictures.