Share this project

Done

Share this project

Done
"LOOKS SEXY AF" - Jimmy Diresta
"LOOKS SEXY AF" - Jimmy Diresta
"LOOKS SEXY AF" - Jimmy Diresta
4,343 backers pledged €267,790 to help bring this project to life.

About

Maker Knife | The EDC Pocket Tool You Want to Carry project video thumbnail
Replay with sound
Play with
sound

Maker Knife | The EDC Pocket Tool You Want to Carry

€267,790

4,343

         

The Utility Knife Blade is an extremely useful tool, especially in the hand of a maker. Its uses are almost endless, yet few people use it. Why?
Because there is no holder designed to fit the needs of us makers.
So we decided to make one.

The Maker Knife is a tool made to be carried every day, everywhere you go. It is compact, lightweight, super quick and easy to open. No more looking for a blade. No more interruptions while you’re working on a project. The Maker Knife is always there, ready to swiftly help you work more efficiently.

- Jimmy Diresta
- Jimmy Diresta
         

Oh yeah did we mention it’s freaking magic? The locking mechanism is extremely easy to use. There are no buttons to push. No weird finger movements to do. You can just flick it open with your thumb or a finger.
The blade holder automatically locks securely into place when it reaches the top and by witchcraft unlocks when you pull it back down. It really does feel like magic!

"WTF!?? How does it work?" - That guy in a red shirt that tried to figure out the mechanism for 2 minutes while pushing it back and forth.

No springs, just magic.
No springs, just magic.
         

More magic! Pretty cool right? And this is without the use of springs! It's all you. You see the Maker Knife is adjustable. You can choose from a range of "almost impossible to open" to "wrist flick to open". Both offer great holding strength while retracted (no worrying about it opening in your pocket), and you can tune it to feel just the way you want it to feel.
It's also a fantastic feature for increasing the "child safety" factor of the knife as you can make it require a lot of force to open. (Obviously don't let kids anywhere near a knife of any kind though)

We made it for you, and us.
We made it for you, and us.

We love the utility knife blades because you can scrape, pry, cut, chop, stab, sand or whatever without worrying about them getting chipped, dull, bent or broken. They are cheap and easy to find at hardware stores, so you can just swap the blade when it gets worn out and have a new flawless, razor sharp edge in seconds.

         

What we don't like is the lack of a good way to hold them. Most handles are bulky and heavy, mainly made for industrial applications. - That won't work for us makers!
What we need is a convenient, super quick knife that is lightweight and compact. A design that is made to be an EDC (Every Day Carry) item.
So we decided to make the Maker Knife.

Here we are, five months later, with a finished design. You would think designing a holder for a blade would be pretty straightforward right? But we didn't just want to make a stick and shove a blade on there. No, we wanted to make something so good that you would like to carry with you, all the time, every day.

Precision manufacuring
Precision manufacuring

There were these extraordinarily complex problems that needed to be solved in order to achieve the magic feeling we were seeking. Some parts were impossible to mill using CNC machines, so we used extremely accurate EDM (Electrical Discharge Machining), making cuts that are no thicker than a human hair.

With a core of high strength stainless steel
With a core of high strength stainless steel
Super quick to use in either hand
Super quick to use in either hand
         

It took many, many tries, prototypes and curse words to perfect this deceptively simple looking locking mechanism. A locking mechanism so intuitive and easy to use that you don't even think about it, you just use it, no matter which hand.

Some of the very early prototypes
Some of the very early prototypes
You can even unlock the Maker Knife wearing thick gloves.
You can even unlock the Maker Knife wearing thick gloves.

"You really don't have to think about using the Maker Knife. You're already done."

Did we mention it's waterproof?
Did we mention it's waterproof?

"Unlocking the maker knife is the transition from a thought to an action. That is why we made it flawless."

The Maker Knife is available in two different finishes; Black or Silver.
The Maker Knife is available in two different finishes; Black or Silver.
The silver finish is very similar to a pretty well known computer model
The silver finish is very similar to a pretty well known computer model
The clip can be mounted on either side of the knife
The clip can be mounted on either side of the knife

Once the campaign is over, we will ask which finish you prefer, so you don't have to make this difficult decision just yet. Pledge now - choose later.

Materials

To ensure the best performance we made the core from high strength corrosion resistant stainless steel. The case is made from aerospace grade aluminium to keep the Maker Knife as light and agile as possible. This combination also means that the Maker Knife is waterproof.

Specs:

  • Height closed: 108mm
  • Height open: 140mm (with blade)
  • Width: 33mm
  • Thickness: 7.7mm
  • Weight: 65g (with blade)
About the thickness of a modern smartphone
About the thickness of a modern smartphone
This makes the Maker Knife very natural to carry
This makes the Maker Knife very natural to carry
So that you can take it with you everywhere you go
So that you can take it with you everywhere you go
This resulted in a knife that got its beauty through function
This resulted in a knife that got its beauty through function

We really do believe we made the best utility knife. It's everything we ever wanted a utility knife to be. We think you will feel the same.

Ceramic blades

Ceramic utility knife blades? Yeah, they are really cool! Ceramic is really, really good at keeping an edge. You can cut foam, cardboard, leather, fabric and such and it will probably never go dull. It's fantastic for RC scratch builders, crafts, leather makers and many others.

But as always in life there are tradeoffs. Ceramic blades will chip when abused. Cutting very hard things like hard wood and such is not really its intended use. Use cheap metal blades that you can pick up local to you for stuff like that.

- Only available as part of the knife bundles during the Kickstarter-
Blades will be available on MakerKnife.com after the Kickstarter has ended. 

 The Diresta Maker Knife

Jimmy Diresta decided to launch a Diresta version of the Maker Knife with a custom brass top plate that he'll customize himself with his brand. The Diresta brass plate comes as an addition to the normal top plate in the color of your choice.
Diresta Maker Knife with Black Base
Diresta Maker Knife with Black Base
The Diresta Brass plate comes as an addition to the standard plate.
The Diresta Brass plate comes as an addition to the standard plate.

Help promoting this campaign by:

This project is promoted by Green Inbox Partner Program
This project is promoted by Green Inbox Partner Program
Press Relations PressWisdom
Press Relations PressWisdom

 The Team

Two like-minded makers. The founder Giacomo (left) and the design partner David (right),
Two like-minded makers. The founder Giacomo (left) and the design partner David (right),
         
      

Risks and challenges

PLEASE BE ADVISED THAT THE REAL PRODUCT MIGHT DIFFER SLIGHTLY FROM PROTOTYPES SHOWN IN THE PICTURES ABOVE

All the funding will go towards making this project a reality. We need to make several molds and they can be quite expensive. It only makes sense to have them made if there is enough volume of parts being produced. That is why we are here on kickstarter! With your help we can make this tool. A tool we believe every makers will love. Makers unite to make a tool!

This is our first kickstarter project and it's going to be a excellent learning experience for us.
However it is not our first time doing product development and fulfilment. We have done both software and hardware before.

This has taught us a lot about the importance of finding quality suppliers. We have already spent a long time building relationships with the manufacturers we will use for this project and we feel pretty confident in their ability to deliver.

We feel well prepared, but like with any project there are always unforeseen challenges to overcome. We will try our utmost to deliver on time, but if we do run into any problems we will try to be as transparent as we can and communicate this to you here on kickstarter.

Thank you very much for supporting us in this endeavour. We hope you will be as happy with the Maker Knife as we are.
/Giacomo Di Muro with the help of David Windestål

Learn about accountability on Kickstarter

Questions about this project? Check out the FAQ

Support

  1. Select this reward

    Pledge €39 or more About $46

    1x Maker Knife | Early Birds

    - One Maker Knife -

    • Includes belt/pocket clip (Can be mounted on either side of the knife)

    • Black or Silver finish (We will contact you after the campaign ends to let you choose between Black or Silver finish)

    Pledge now and get an exclusive Kickstarter price! - Expected retail price €69

    Includes:
    • 1x Maker Knife
    • Black or Silver finish
    • Belt/pocket clip
    Less
    Estimated delivery
    Ships to Anywhere in the world
    2,196 backers
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge €54 or more About $63

    1x Maker Knife + 3x Ceramic blades

    - One Maker Knife -

    + Three white Custom Ceramic Blades etched with the stylish "Giaco Whatever" logo

    • Includes belt/pocket clip (Can be mounted on either side of the knife)

    • Black or Silver finish on the knife (We will contact you after the campaign ends to let you choose between Black or Silver finish)

    Pledge now and get an exclusive Kickstarter price! - Expected retail price €85

    Includes:
    • 1x Maker Knife
    • Black or Silver finish
    • 3x Ceramic Blades
    • Belt/pocket clip
    Less
    Estimated delivery
    Ships to Anywhere in the world
    948 backers
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Reward no longer available

    Pledge €69 or more About $81

    Founders Edition Maker Knife | Limited!

    One very special Maker Knife from the very first 150 units produced. All marked with their number as they were manufactured, 001 to 150.

    • Includes three white Custom Ceramic Blades etched with the stylish "Giaco Whatever" logo

    • Your name engraved on the "Founders wall" at the "Giaco Whatever" workshop

    • Also comes with a little secret something as a thank you for being one of the super backers.

    • Includes belt/pocket clip (Can be mounted on either side of the knife)

    • Black or Silver finish on the knife (We will contact you after the campaign ends to let you choose between Black or Silver finish)

    Exclusive Kickstarter offer. Will not be available after the campaign ends.

    Includes:
    • One of the first 150 Maker Knives ever produced
    • Black or Silver finish
    • Belt/pocket clip
    • 3x Ceramic Blades
    • A little secret something
    • Your name engraved on the "Giaco Whatever" founders wall
    Less
    Estimated delivery
    Ships to Anywhere in the world
    Reward no longer available 150 backers
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  4. Select this reward

    Pledge €75 or more About $88

    1x DIRESTA Maker Knife

    - One Limited Edition DIRESTA Maker Knife

    The Limited Edition DIRESTA Maker Knife will be available during this Kickstarter campaign ONLY.

    The top plate is solid brass and Jimmy Diresta himself will stamp them with his brand on. Jimmy has been a huge supporter of this project from the very beginning and we're thrilled to be able to offer a Diresta version of the Maker Knife ONLY during this Kickstarter campaign.

    • Includes belt/pocket clips (Can be mounted on either side of the knife)

    • Black or Silver finish - You get to choose the finish for each knife.

    Includes:
    • 1x Maker Knife
    • 1x Solid Brass DIRESTA Top Plate (Hand stamped by Jimmy Diresta)
    • Belt/pocket clip
    • Black or Silver finish
    Less
    Estimated delivery
    Ships to Anywhere in the world
    412 backers
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  5. Select this reward

    Pledge €78 or more About $92

    2x Maker Knife | Dual pack

    - Two Maker Knives -

    • Includes belt/pocket clips (Can be mounted on either side of the knife)

    • Black or Silver finish - You get to choose the finish for each knife.
    Having trouble deciding which finish you like best? Get one of each! (We will contact you after the campaign ends to let you choose between Black or Silver finish)

    Pledge now and get an exclusive Kickstarter price! - Expected retail price €138

    Includes:
    • 2x Maker Knife
    • Black and/or Silver finishes
    • 2x Belt/pocket clip
    Less
    Estimated delivery
    Ships to Anywhere in the world
    608 backers
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.

Funding period

- (35 days)