Funding Unsuccessful This project’s funding goal was not reached on .
    1. Profile.small

      Creator tony stockert on August 10, 2012

      Also, a bayonet system may even be over-thinking it. Could be as simple as a slide-and-lock (tongue & groove) system, similar to the eye piece cover on a DSLR.

    2. Profile.small

      Creator tony stockert on August 10, 2012

      Can't wait to get this! I agree with Christoper that a bayonet system would be preferable in order to keep it easier to future-proof. Not sure how difficult that would be to integrate into the current design, but it may be well worth your while, since you could then also possibly expand to other popular phones simply by making the case for it. Should instantly bring in a much larger crowd to fund this project.

    3. Itamat_roth.small

      Creator Saturn3DDesign on August 6, 2012

      @Juan - Hi, and thanks for your comments.
      Shooting is always done with the iPhone held at landscape, but the way this works is we use the iPhone's camera to shoot two separate images of the same objects. So basically, we're shooting two portrait images side-by-side, which are then used to compose a single portrait image (or video) in 3D.

      Regarding your TV - some TV's use flipped formats (i.e. the left image on the right and the right on the left). Try flipping the images in the youtube controls. Did you manage to properly view any other youtube 3D videos?

    4. Fb_profile_picture.small

      Creator Juan Carlos Santana on August 5, 2012

      I was watching some of your YouTube videos in my Samsung 3D led but they don't seem to look right :s

    5. Fb_profile_picture.small

      Creator Juan Carlos Santana on August 5, 2012

      Nvm the 1st question I found it :p

    6. Fb_profile_picture.small

      Creator Juan Carlos Santana on August 5, 2012

      2 more questions that would really help!
      1. Can you post a link to your YouTube channel so we can watch 3D video made by the iPhone with cone
      2. I'm pretty sure the answer is yes, but can you shot videos in landscape too?

    7. Missing_small

      Creator Vince kemp on August 4, 2012

      Looks like fun, good luck. A comment on the resolution might increase funding.

    8. Missing_small

      Creator Christopher on August 4, 2012

      Black for me too. If the cone is made to be removable from the case via a bayonet type fitting then all that is needed is to offer a new case for the next gen iPhone to allow it to be transferable.

    9. Missing_small

      Creator Remco Sonnema on August 3, 2012

      Please make an option for the Iphone 5 (or the new iphone.. whatever it's going to be called).. by the time this comes to production i won't have my iphone 4s anymore.

    10. Itamat_roth.small

      Creator Saturn3DDesign on August 3, 2012

      @Justin - Great to hear you've been waiting for us :). Thanks for the feedback!

      @Thomas, @Juan - That's a great question about Apple TV and Airplay. Not sure about how Apple TV/Airplay will handle different file formats. If it's possible, we'll do our best to enable it as soon as possible on the app.

    11. Itamat_roth.small

      Creator Saturn3DDesign on August 3, 2012

      Hey guys, thanks for all the feedback!

      Regarding color (@Fred, @Juan, @Thomas) - black will definitely be an option.

      Regarding 3DTV (@Fred, @Juan) - In essence, this is simply a matter of converting to the right file format. Can't commit right now to any specific TV models, but we'll do an effort to support as many formats as possible. Short answer - you'll almost certainly be covered.

    12. Fb_profile_picture.small

      Creator Thomas Rudolph on August 2, 2012

      i would like a black one too ;)

      would it be possible to share them via apple tv on my samsung 3d tv?

    13. Missing_small

      Creator Justin Reus on August 2, 2012

      Like with all of my phone attachments, I'll have to cut off and sand down the edges so I can use it without having to remove my phone from the case. Basically turn it into a flat plate that I pinch with a binder clip to hold it in place. Look forward to using it. Hope it gets funded

    14. Missing_small

      Creator Justin Reus on August 2, 2012

      FINALLY! I've seen attachments like this for cameras, and I've been looking into the fujifilm 3D camera - but I've really always wanted a product like this. I take side by side 3D all the time, and i have to rush to get the shot with as little disruption in the background as possible. Thank you for eliminating my primary reason for wanting a 3D printer.

    15. Fb_profile_picture.small

      Creator Juan Carlos Santana on August 2, 2012

      i have 3 comments
      1. Like Fred i would like a Black one, i prefer not to cause too much attention to the cone sticking out of my iphone :p.
      2. will videos be able to export or airplay to my Samsung 3D tv to watch the videos in 3D
      3. im in the early bird package, is there any way we can get this sooner? really looking forward to this, if you need people to test it and send any comments back.

    16. Fb_profile_picture.small

      Creator Fred Boyles on August 2, 2012

      Are you going to make a plain black one? I don't know all the ins and outs with the workings 3D but will I have the ability to shot a video with the 3Dcone and play it back on my LG 3D TV with the polarized glasses?

158
Backers
$5,832
pledged of $55,000 goal
0
seconds to go
Itamat_roth.medium

See full bio

  • Pledge $29 or more
    You selected

    100 backers All gone!

    Eearly Bird Package - First 100 backers will get the 3DCone package for only $29 – a 3DCone + 3D glasses (Please add $10 for International shipping)

    Estimated delivery:
  • Pledge $39 or more
    You selected

    42 backers

    The 3DCone Package - A 3DCone + 3D glasses (Please add $10 for International shipping)

    Estimated delivery:
  • Pledge $79 or more
    You selected

    10 backers

    Double Your Pleasure - 2 3DCones + 2 3D glasses, one for you and one for a friend. (Please add $10 for International shipping)

    Estimated delivery:
Funding period

- (35 days)