Share this project

Done

Share this project

Done
The HANSY1010 is a Hybrid Mono/Duophonic Synthesizer. A Digital mind with an analog soul
The HANSY1010 is a Hybrid Mono/Duophonic Synthesizer. A Digital mind with an analog soul
The HANSY1010 is a Hybrid Mono/Duophonic Synthesizer. A Digital mind with an analog soul
40 backers pledged €8,698 to help bring this project to life.

About

Synthesizer HANSY1010 project video thumbnail
Replay with sound
Play with
sound

Synthesizer HANSY1010

€8,698

40

Introduction

The HANS1010 is a Hybrid synthesizer with some great features. The HANSY1010 can produce some warm analog sounds but also digital sounds. It has a 24 steps sequencer and an arpegiator. You can imagine a lot of sounds with it. The HANSY1010 use a variable sample frequency technology to have great sound even on higher notes.

Differents synthesis

  • The HANSY1010 can produce basic waveforms like the SAW/SINE/TRI/SQUARE/PMW...but also some special Waves like the MKS,PRO2,PSAW,SAWSQUARE,TRISQUARE...For all these waves you have 2 waveshapping parameters to create more and more waves. So with a simple SINE you can do a lot of sounds.

 

Some Waveform
Some Waveform

 

Wave shapping 1 on the MKS waveform
Wave shapping 1 on the MKS waveform
  • The HANSY1010 can also read his internal waveform bank. On the SD card you have 4300 waveform to make some Electric piano,organ sound...but also some wave from old synthesizers. Of course you always have the two waveshapping.
  • The HANSY1010 can make Vector synthesis between 4 waves from the SD card.
  • The HANSY1010 include a Phase distortion synthesis. In this case the waveform is not the signal generate but the speed at which a sine is read. If you push the speed you can generate some false resonance

Make your sound

After the two Oscillators you have a nice analog filter. Of course you have a lot of LFO and EG to modify your sound. In addition you can route with a matrix one EG, one LFO, the aftertouch,the Joystick to differents parameters.

Simple Synoptique (only one Osc)
Simple Synoptique (only one Osc)

A very expresive Synth

With the hansy you can route the velocity, the aftertouch ,the Pitch bend , the mood wheel and the four directions joystick to many parameters of the synth. So you can touch and move the sound. 

Videos and Sound

 

They talk about the HANSY...

Specifications

  • Duophonic Hybrid synthesizer : Mono or Duo Mode
  • Large Interface with 4*40 LCD and OLED (128*64)/ 8 Potentiometers / 16 Push Button and one Joystick
  • 256 memory locations
  • Digital Oscillators / Analog Filter 4 poles
  • Resonance Keyboard tracking positive or negative Oscillator 
  • waveform Legacy waveform: Sine/Tri/Saw/Square/PWM/Random 
  • Special waveform: TriSquare/SawSquare/Pro2/MKS... 
  • Wavetable : over 4300 wavetables
  • Noise generator
  • Transpose and detune
  • Phase Distortion
  • One Sub Osc per Osc
  • Sub Waveform : Sine/Tri/Saw/Square/Pulse1/Pulse2/Pulse3
  • Sub Type: -2 / -1 / 0 Octave or 5Th Up or 5Th Down
  • Combi between OSC and SubOsc ADD/MULTIPLY/XOR/ENTERLACE
  • Wave Morphing and Wave shaping possibility (2 parameters per OSC)
  • 3 LFO
  • LFO Waveform : Sine/Tri/Saw/Inv/Random/Lag
  • LFO Sync: Free/Key/delay
  • 4 ADSR envelope Generator with positive and negative amount
  • VCF Negative and positive Amount
  • VCA
  • Pitch route to OSC1/OSC2 or OSC1&2
  • Matrix EG
  • Glide
  • External Analog audio input Midi In and Out with soft Thru
  • Sequencer and Arpeggiator ( 1 Sequence or Arp per Sound)
  • 24 Step 6 Parameters per step Transpose/Velocity/Cutoff/Gate/Glide/Noise
  • Swing
  • Sequencer or Arp send to Midi channel
  • Midi Sync In and Out
  • Assignable Pitch bend / Mod wheel
  • Assignable 4 axis Joystick to 20 destinations with amount
  • Double Assignable Aftertouch to 20 destinations with amount
  • Sound and Library manager software on PC 
  • Weight 1,3Kg
  • Size 335*125*48 (mm)

 

Differents HANSY
Differents HANSY

 The Team

The Team
The Team

 Facebook page

https://www.facebook.com/Hansy.fr/

Contributions Available

PCB 

 

Set of PCB
Set of PCB

PCB and Processor board mounted

Set of PCB Processor Board Mounted
Set of PCB Processor Board Mounted

HANSY1010 Orange Edition

Design : Hannes Pasqualine / Case : Adrian Hallik

Orange Edition
Orange Edition

HANSY1010 White Edition

Design : Gwladys de la Jungle - Oskar Storck Case : Regis Krusst 

White case
White case

 

And then we are three
And then we are three

 

Risks and challenges

I am a electronic and software engineer and have worked on the audio field for more than 20 years. It is always been my dream to build my own synthesizer.

The HANSY1010 is hand build here in France.
I have build 10 units, and some customers have build their own with the DIY Kit. It is not a concept or a prototype but a real instrument. It's not a toy or an noise machine.

I can build 1 per week so you can have your HANSY1010 in less then 4 months. I plan only 10 units for this first batch .The HANSY1010 do not use special components so i can buy them from different providers.

The HANSY1010 firmware can be updated easily via USB. You just have to drag and drop the more recent Firmware to the HANSY1010 mass storage.

Learn about accountability on Kickstarter

Questions about this project? Check out the FAQ

Support

  1. Select this reward

    Pledge €5 or more About $6

    Thank you for your help

    Thank you for you help.

    Less
    Estimated delivery
    3 backers
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge €60 or more About $69

    HANSY1010 DIY Board Set

    A set of PCB to mount your own HANSY1010. Bill of material and DIY user guide included. (Set of components not included)

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited 6 backers
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Select this reward

    Pledge €100 or more About $116

    HANSY1010 DIY Board Set with SMD mount

    A set of PCB to mount your own HANSY1010 with all the component mounts on the Processor Board. Bill of material and DIY user guide included. (Set of components not included)

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited 2 backers
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  4. Select this reward

    Pledge €100 or more About $116

    HANSY CASE

    Orange or White case

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited 0 backers
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  5. Reward no longer available

    Pledge €160 or more About $185

    DIY PCB KIT + Case Orange or White

    You want to build your own hansy and you need a case....this is for you.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Reward no longer available 12 backers
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  6. Select this reward

    Pledge €380 or more About $439

    HANSY1010 White edition

    The HANSY1010 white edition, external power included. With User manual.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited 6 backers
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  7. Reward no longer available

    Pledge €380 or more About $439

    HANSY1010 Orange edition

    The HANSY1010 Orange edition, external power included. With User manual

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Reward no longer available 8 backers
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.

Funding period

- (30 days)