Share this project

Done

Share this project

Done
Carry AJ Wallet, the thinnest wallet + bottle opener. Sleek Anodised Aluminium / Titanium Unibody with 100% Genuine Leather.
Carry AJ Wallet, the thinnest wallet + bottle opener. Sleek Anodised Aluminium / Titanium Unibody with 100% Genuine Leather.
185 backers pledged £9,425 to help bring this project to life.

Use this space to cheer the creator along, and talk to your fellow backers.

Have a question?

Only backers can post comments. Log In
    1. Andy Bruce on November 23, 2014

      Finally got my wallet, Aws was hard to get a hold of but when I did he sent me a wallet. Lilke most people my biggest complaint is with the pin design rather than a button, I assume it was to cut costs but it is a really bad design in my opinion. Also the strap holding down the money is not tight enough. That's how it goes with Kickstrater sometimes they aren't perfect, oh well.

    2. Andy Bruce on September 2, 2014

      Still no wallet, first Kickstarter campaign I backed where I've been ripped off.

    3. Missing avatar

      Warren on July 19, 2014

      it seems like many posts in this thread were deleted, all of which were backers that have not received their wallet. This is looking like a scam

    4. Andy Bruce on July 16, 2014

      Aws, PM is not working (your account is deleted?) and you have not responded to the email I sent via your online store, can you please send me a black wallet.

      Thanks

    5. Missing avatar

      isaac daum on June 21, 2014

      I just went to a leather shop and bought glove snaps and put those on. Takes about 2min and they work a lot better

    6. Ryan Sweet on June 19, 2014

      I must say I love my wallet and get compliments on it all the time. However I think my only change would be snaps on the next version instead of the studs. although the studs do look nicer. the leather is already starting to stretch around it and the strap comes undone on it's own .

    7. Matthew Kosel on May 26, 2014

      I'm just curious. does anyone thin the push button is a better choice than the snap?

    8. Missing avatar

      Erik Tijburg on May 26, 2014

      I like my AJ Wallet but I have one serious issue with it. The Original design had snaps and the delivered wallet is just studs. The studs dig into my leg. If the wallet had the snaps it would be perfect.

    9. Missing avatar

      Cody Moore on May 10, 2014

      Aws Jan + AJD,
      I still have not received my wallet or tracking number. If you can help me at all that would be greatly appreciated. Thanks.

    10. Missing avatar

      Matthew Collinson on May 10, 2014

      I still haven't received a reply in regards to receiving the wrong wallet please see my below comment made on Apr 19, when can I expect the correct wallet.

      I received the Brown Genuine High Quality Brazilian Leather, Black leather belt for the money and White stitching all around.
      When I should have received the PE design 6mm AJ-wallet can hold up to 7 - 10 cards. Anodised aluminium with Black Genuine High Quality Brazilian Leather, Burgundy leather belt for the money and White stitching all around.

    11. Matthew Kosel on May 10, 2014

      I saw the update but it was basically jus pictures and no mention that the pin is just about as tall as the body of the wallet itself. If it was a third of the size maybe it would have worked. A push pin in princaple over a snap is not the issue. It made the wallet a weapon and that was not conveyed in the update.

    12. Missing avatar

      Aws Jan + AJD (deleted) Creator on May 10, 2014

      Hi Matthew,

      Thank you and I'm very sorry for the push button, again i have to say i did update all backers about the push fit button on the 3rd of Jul 2013 update #21 you should check my every update i do for the project, also i didn't receive any complaints about the button that time when i did the update. And AJ wallet it's not designed for back pockets to sit on a metal frame.

      Thank you,

      Aws

    13. Matthew Kosel on May 10, 2014

      I received my wallet today, very excited. Handling it felt good and I thought I may be the envy of all my friends. I had to switch back to my old wallet only two hours later due to the push button digging into my leg and for fear the other push button may punch a hole through my slacks. If it would have had snaps I would bet this would have been my wallet every day until I wore it out but alas due to these sharp, dangerous protrusions I don;t guess I will ever use it. Too bad all that effort wasted on something that will be thrown out.

    14. Missing avatar

      Aws Jan + AJD (deleted) Creator on May 9, 2014

      Hi Guys i did update you about the push fit button on the 3rd of Jul 2013 update #21 you should check my every update i do for the project, also i didn't receive any complaints about the button that time when i did the update.

      Thank you,

      Aws

    15. Missing avatar

      Michael Fleishman on May 5, 2014

      I received my wallet today. This is not what I paid for. I ordered TITANIUM with no bottle opener with yellow stitching. What I received is heavy with a bottle opener and it doesn't have snaps or look like the picture nor does it have yellow stitching. I would like to return it for a refund. This is totally not what I ordered.

    16. Missing avatar

      Benjamin Heise on May 3, 2014

      I still haven't received anything. No wallets, no tracking number. You should struggle for a solution. Patience is running out.

    17. CrispyPete on May 1, 2014

      If there is a version 2 would definitely recommend going with the snap button or something else other the the push on one - just my opinion having used for a few days.

    18. Lachlan Scott on April 30, 2014

      I have still not received my wallet......

    19. Missing avatar

      Aws Jan + AJD (deleted) Creator on April 27, 2014

      Jon, first of all for the push fit button i did update you guys about the push fit button on the 3rd of Jul 2013 update #21 you should check my every update i do for the project, also i didn't receive any complaints about the button that time when i did the update.

      We are sorry you did receiving the wrong wallet mixup happen we can send you the right wallet. And for not recommend any one to back up my project this is your opinion keep it to yourself.

    20. jon gillespie on April 27, 2014

      I have finally received my wallet - thank you.

      That said, this is not the product I backed and I am very disappointed in the overall product.

      The stitching was not what I requested, I also requested the version without bottle opener. The fastening mechanism is not the snap type and the little metal nub that sticks up digs into my leg - very annoying!! Additionally, the metal prongs for the bills sticks out as does some random piece of metal presumably included to protect your leg from the prongs for the bills.

      In use, the nub for the strap digs into your leg, the prongs for bills are too close together meaning its quite difficult to add bills and dig into your legs.

      The bottle opener works well though!

      Overall, when considering the poor communications - I would not recommend supporting another Was Jan + AJD project. Sorry.

    21. CrispyPete on April 25, 2014

      Wallet finally arrived today, will take some getting used to and to be honest had to pick up a different one that I got from another project due to the wait. May save it for nights/ days out when the bottle opener more useful as not as compact as I was hoping.

    22. Missing avatar

      Benjamin Heise on April 23, 2014

      I haven't received my wallets, I haven't received a tracking number and i didn't get an answer when asking for help.
      How should i fell now? One month after "Aws Jan + AJD" was said to have sent the last wallets.

    23. CrispyPete on April 22, 2014

      Still no wallet for me in the UK. Got the tracking number for POS service early Apr but last update is still "4th April sent to the UK " and nothing after that. Wondering if it's stuck at customs or something but would have thought the postal tracking service should say if it's arrived in UK and held up? Is there a different number or service e.g. UPS or someone it changes to with a different tracking number when it gets to the UK? Any other UK backers received theirs and can advice who final delivery company was? I had this issue on another KS which is why I am wondering if the same thing has happened and it's been held up for duty payment? Any help greatly appreciated!

    24. Missing avatar

      Matthew Collinson on April 19, 2014

      I received the Brown Genuine High Quality Brazilian Leather, Black leather belt for the money and White stitching all around.

      When I should have received the PE design 6mm AJ-wallet can hold up to 7 - 10 cards. Anodised aluminium with Black Genuine High Quality Brazilian Leather, Burgundy leather belt for the money and White stitching all around.

    25. Missing avatar

      Aws Jan + AJD (deleted) Creator on April 18, 2014

      Hi Matthew, I have checked i did not received any email or message about this, and do you mean you did received the Black wallet with Brown belt or all in Brown. I'm sorry mistake happen when your sending 300 plus wallet out mixed up happen, so we would like to apologise on behalf of me and AJD team.

      Thank you for your understanding,

      Aws

    26. KOUHEI SASAKI on April 18, 2014

      I'm from Japan and I haven't receive tracking no. Please reply soon.

    27. Missing avatar

      Aws Jan + AJD (deleted) Creator on April 18, 2014

      Hi Backers,

      You not the only one, when the post office get back to me they told me the item left Malaysia on the 20th of March, i have ship a wallet to this backer on the same day i ship yours check his tracking number he just received his wallet few days a go.

      I don't understand why each country delaying the post for delivery, you see the when you put the tracking number on the POS Malaysia doesn't give any update after the 20th of march.

      RR155922660MY
      http://www.pos.com.my/pos/appl/service/sub_meltrack.asp

      But when you use the USPS It give you more information so why? i don't know

      https://tools.usps.com/go/TrackConfirmAction.action…

      I hope you understand the pressure I'm in from all backers I'm doing my best to explain each and everyone the problem is not me is the post office service in each country.

      Thank you,

      Aws

    28. Missing avatar

      Matthew Collinson on April 18, 2014

      I received my wallet 9 days ago but its the wrong version I should have received the 1x PE design 6mm AJ-wallet can hold up to 7 - 10 cards. Anodised aluminium with Black Genuine High Quality Brazilian Leather, Burgundy leather belt for the money and White stitching all around. instead I received the brown version with white stitching, can you please send the correct version.

      Im re posting this comment since I have received no response to my previous one.

    29. Missing avatar

      Charles Baz on April 16, 2014

      Picked up the wallet from the post office last weekend and I'm quite pleased with the product so far. My initial impressions were:

      1. It was sleek yet slightly heavy despite most of it being made from titanium.
      2. Really like the finishing of the metal, how the leather was nicely cut and the neat stitching.
      3. Can be daunting trying to properly insert your cash between the metal fins when you are at a checkout counter with a queue.

      Albeit it feeling weighty for its size, I felt accustomed to it by the end of the day amd grew to love the overall feel of the wallet. What I particularly enjoyed the most was how perfectly neat all the contents of my previous money clip fit into the new wallet. I will have to get used to folding my cash the right amount to fit them into the fins quickly next time. The trick is to be patient and to remain stay calm.

      Thank you for the updates and hard work!

    30. Ryan Sweet on April 15, 2014

      I just received the wallet. Thabks to the post office it only took a month. Brightside any on wait in they are on the way.

      Its spectacular.   I love it man.  Beautiful job. 

      So worth the wait man.  I appreciate your attention to detail and quality controlled you upheld on this.

         I already transferred everything over from my old wallet and pitched the old one in the trash.  Thanks again man. 

    31. Paul Beare on April 15, 2014

      Received my wallets here in the US but unfortunately I got two LE design wallets instead of 1 LE and 1 PE design? Can I get the correct version?

    32. 5th Year Sr. on April 13, 2014

      worth the wait, albeit a rather long one at 6 months. i love the unique design and am happy i got my hand on it.... in the nick of time. i lost my money clip last weekend and have had to reorder my cards!

    33. Missing avatar

      Vincent Arcellana on April 13, 2014

      Still waiting on mine here as well. Have you actually shipped all the wallets? Given your lack of timely or detailed updates, and by keeping us in the dark when you could have just been honest, I'm not sure what to believe. Do you have tracking numbers for all the shipments?

    34. Missing avatar

      isaac daum on April 12, 2014

      Got my wallets and I love them but one of them is the wrong color. I ordered a pe 7-10 black leather with a black belt but got black leather with a brown strap is there any way to change it out/replace it? I'll also be moving in the next couple weeks.

      PECIAL OFFER 1x LE design 4mm AJ-wallet can hold up to 5 - 6 cards. TITANIUM with a aluminium tag. Black Genuine High Quality Italian Leather, Black leather belt for the money and Yellow or Black stitching all around. These will later retail at £169.
      Thanks Isaac

    35. Missing avatar

      Aws Jan + AJD (deleted) Creator on April 10, 2014

      Andrew, I'm really sorry for this i can't control the shipping not in my power, I'm doing my best to find out why there is a delays when the post office told me it will take 7 - 14 days.

    36. Missing avatar

      Matthew Collinson on April 10, 2014

      I have now received my wallet but its the wrong version I should have received the 1x PE design 6mm AJ-wallet can hold up to 7 - 10 cards. Anodised aluminium with Black Genuine High Quality Brazilian Leather, Burgundy leather belt for the money and White stitching all around. instead I received the brown version with white stitching, can you please send the correct version.

    37. Andrew Wells on April 10, 2014

      My wallet still hasn't arrived, 17 days after you said the last ones were sent out. I have to say that I am getting increasingly disillusioned by the delays.

    38. katie Chinn on April 9, 2014

      Sorry it was actually 7 kickstarter's that I've backed & gotten after I backed this one...

    39. katie Chinn on April 9, 2014

      I got my wallet today. And unfortunately I wish I could just return it. Don't get me wrong the quality is nice but the colors are off from what I ordered. I was suppose to have a black body with burgundy bill strap with white stitching & somehow I ended up with a black body, dark brown bill strap & very bright yellow stitching. Uhh, ok.
      But the real reason I would like to return it is that it's basically two months off from it being a year that I backed this project. I've ordered another wallet in that time. Cause I needed one. I understand kickstarter can take a while but this is the longest one has ever taken, that I've backed personally. I've backed at least 4 or 5 kickstarter's after I've backed this one & gotten all of them before I got this one.
      It's a nice wallet, it's just to bad I don't really want it / need it anymore.

    40. 5th Year Sr. on April 8, 2014

      I selected the
      "Pre-order 1x LE design AJ-wallet can hold up to 5 - 6 cards. Anodised aluminium with Brown Genuine High Quality Brazilian Leather, Black leather belt for the money and White stitching all around. These will later retail at £49."
      reward level and have not received it yet.
      I have not been sent any tracking number yet, what's the deal?
      My Shipping address is as follows incase you have not yet sent it.
      135 W Elm, Stillwater, Oklahoma, 74074

      since its in the US when can I expect it to be shipped to me? assuming you started shipping like we were informed in the last update?

      Thank you!

      Ben Laures

    41. Ryan Sweet on April 8, 2014

      Thanks for the update and looking into this Aws. looking forward to receiving it.

    42. norifumi ohtsuki on April 8, 2014

      I have not yet received it.

    43. jon gillespie on April 8, 2014

      I am really disappointed in this project so far. I have utmost respect for someone having a crack at it and from the imagery I like the product - things just don't seem to be going well with actual delivery of a product however (manufacturing through to delivery). I understand issues arise, and they certainly have, but they seem to have arisen at each and every stage of the project. I can only hope the lessons can be learnt if you choose to do another project in the future!

      I have not even received my tracking number so no idea when or if this will get to me, let alone if any changes identified in surveys have been noted?!

    44. Missing avatar

      Aws Jan + AJD (deleted) Creator on April 8, 2014

      We did our part by sending all the wallets out, but there is a problem with a few backers not yet receiving their wallets. The postal system used has advised me that sending to the worldwide destinations takes approximately 2 weeks or more. So as some backers still haven't received theirs, i have reported this to the post office to investigate and will keep you updated as soon as i get a reply.

      Thank you,

      Aws

    45. Missing avatar

      Matthew Collinson on April 7, 2014

      I have received my tracking number and checked its current status is Item sent to LONDON but this was on the 1st of April and since them the item has not moved

    46. Ian Aitken on April 7, 2014

      Thanks Aws,

      My new wallet is in my pocket as I type.

      Great design. Love the inside out feel and accessibility.

      One suggestion if I may: the clasps protrude too much. They hurt when I sit and will wear through my trousers. Any thoughts for future developments that would reduce the protrusions?

      Kind regards

    47. Ryan Sweet on April 7, 2014

      anyone have any idea roughly how long it's taking for US orders from the ship date?

    48. Missing avatar

      Tashia cherry on April 6, 2014

      Haven't gotten my wallet yet! Getting very upset. Tracking number?

    49. Colton Schulte on April 6, 2014

      I got my wallet, and was as promised. The wallet had Quality leather and CNC machined aluminum. AJ did a good job of keeping the backer updated. Looking forward to future products. Thanks.

    50. Ibrahim. J on April 5, 2014

      Hi guys, i had the same problem i thought my wallet got lost each time i check the postal system showing the tracking stopped at London for about 11 days but in the end i did receive the wallet, so no need to panic.

Show older comments